Leeson 102905.00 PRODUCT INFORMATION PACKET

PRODUCT INFORMATION PACKET

Model No: 102905.00

Catalog No: 102905.00

0.50 HP General Purpose Motor, 1 phase, 3600 RPM, 115/208-230 V, 56 Frame, TEFC
Single Phase TEFC Motors

Regal and Leeson are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2020 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 61 of 6

Product Information Packet: Model No: 102905.00, Catalog No:102905.00 0.50 HP General Purpose Motor, 1 phase, 3600 RPM, 115/208-230 V, 56
Frame, TEFC

Nameplate Specifications

Output HP 0.50 Hp Output KW 0.37 kW
Frequency 60 Hz Voltage 115/208-230 V
Current 7.0/3.4-3.5 A Speed 3450 rpm
Service Factor 1.15 Phase 1
Efficiency 66 % Power Factor 68
Duty Continuous Insulation Class B
Design Code N KVA Code L
Frame S56 Enclosure Totally Enclosed Fan Cooled
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE N IP Code 43

Technical Specifications

Electrical Type Capacitor Start Induction Run Starting Method Across The Line
Poles 2 Rotation Selective Counterclockwise
Resistance Main 4.08 Ohms Mounting Rigid base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type NEMA 56 Overall Length 9.94 in
Frame Length 5.25 in Shaft Diameter 0.625 in
Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY
Outline Drawing 032134-525 Connection Drawing 005005.44

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:14/10/2020

2 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 62 of 6

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATI ON - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHE R FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTI TY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANG LE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

032134

H. ADIKE

10/24/2018

D SURYAWANSHI

03-08-2019

A H. ADIKE 10/24/2018

ECO-0163252

OUTLINE CONVERSION PROJECT

OUTLINE

031631

S56 FRAME RIGID MOUNT - TEFC

DASH

NO.

"C" "AD"

525 9.95[252.73] 2.19[55.62]

575 10.45[265.43] 2.69[68.32]

600 10.70[271.78] 2.94[74.67]

5.63

142.99

4.61

116.99

3.56

90.42

3.68

93.47

.104

2.642

3.50

3.44

88.90

87.38

7.82

198.75

6.50

165.10

4.88

123.95

1.22

30.99

2.44

61.98

(3) .88[22.35]
KNOCKOUTS

NAMEPLATE

.6250
.6245

15.8737

15.8610

.25

6.35

"C" .06

[ 1.52]

1.94

49.37

3.00

76.20

3.75

95.25

.34

8.64

"AD"

1.88

47.75

.06

1.62

2.75±.09

69.94±2.29

6.13

155.70

1.41

35.81
FULL

DEPTH

.19[4.82] SQ.
x 1.38[35.05]
KEY

EFF. DECAL
(WHEN REQUIRED)

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATI ON - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHE R FIRM RECEIVING IT IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTI TY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANG LE
.X 0.1 [ 2.5] 0.5
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

125 3.2

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

032134

H. ADIKE

10/24/2018

D SURYAWANSHI

03-08-2019

A H. ADIKE 10/24/2018

ECO-0163252

OUTLINE CONVERSION PROJECT

OUTLINE

031631

S56 FRAME RIGID MOUNT - TEFC

DASH

NO.

"C" "AD"

525 9.95[252.73] 2.19[55.62]

575 10.45[265.43] 2.69[68.32]

600 10.70[271.78] 2.94[74.67]

Uncontrolled Copy

3 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 63 of 6

Uncontrolled Copy

4 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 64 of 6

Uncontrolled Copy

5 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 65 of 6

Curve at

Volts

HP

HZ

Model No

HP

VOLTS

Catalog No

102905.00

HZ 60RPM

3450

Torque in Oz.Ft

FL TORQUE

Oz.Ft

FL AMPS

BD TORQUE

Oz.Ft

PU TORQUE

Oz.Ft

LR TORQUE

34.6

Oz.Ft

LR AMPS

20.5

WINDING

CE482235-3

Date

3/27/2018

Uncontrolled Copy

LEESON ELECTRIC CORPORATION

TYPICAL PERFORMANCE CURVE for AC MOTOR

230

60

102905.00 0.5

0.50

115/208-230

Eff −

−

−−

PF −

−

−−

HP −

−

−−

RPM −

−

−−

KW −

−

−−

Amps −

−

−−

1

60 70 80 90 100

EFF

0 10 20 30 40 50

60 70 80 90 100

PF

0 10 20 30 40 50

0 2 4 6 8 10 12 14 16

0.6 0.7 0.8 0.9 1

HP

RPM

0 0.1 0.2 0.3 0.4 0.5

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

12

35.2

0.6 0.7 0.8 0.9 1

3580 3600 3620 3640 3660

KW

0 0.1 0.2 0.3 0.4 0.5

3460 3480 3500 3520 3540 3560

0 2 4 6 8 10 12 14 16

Torque

60 70 80 90 10060 70 80 90 1000.6 0.7 0.8 0.9 13580 3600 3620 3640 36600.6 0.7 0.8 0.9 13 3.5 4 4.5 5

PF

HP

KW

EFF

RPM

AMPS

0 10 20 30 40 50

0 10 20 30 40 50

0 0.1 0.2 0.3 0.4 0.5

0 0.1 0.2 0.3 0.4 0.5

0 0.5 1 1.5 2 2.5

3460 3480 3500 3520 3540 3560

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

0 2 4 6 8 10 12 14 16

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

Torque

7/3.4-3.5

31.5

6 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 66 of 6