Lees 230W BEAM LIGHT 7R, 200W BEAM LIGHT 7R User Manual

200W/230W BEAM LIGHT

USER MANUAL

KEEP THIS MANUAL FOR FUTURE NEEDS

2

3

CONTENTS

1. Introduction…………………………..………………………………………4

2. General Guidelines…………….……………………………………………4

3. Safety Instructions…………………………………………………………..5

4. Installation Instructions……………………………………………………..6

5. Cleaning and Maintenance…………………………………………………7

6. Technical Parameters…………………..………………………………….. 8

7. Gobo&Color……………………………………………………………….….9

8. Menu Function………………………………………………………….…..10

9. Circuit Schematics…………………………………………………..……..11

10. DMX Channels……………………………………………………..…..…....12

11. Remark………………………………………………………………………...15

4

Thank you for your patronage. We are confident that our excellent products and
service can satisfy you. For your own safety, please read this user manual carefully
before installing the device.
In order to install, operate, and maintain the lighting safety correctly. We suggest that
the installation and operation should be done by the verified technician and follow the
instruction strictly.

A CAUTION!

Keep this device away from rain and moisture!

CAUTION!

Unplug mains lead before opening the housing.

Every person involved with the installation, operation and maintenance of this device
has to:

-be qualified

-follow carefully the instructions of this manual

INTRODUCTION:

Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the carton box you should find:

1. One power cable

2. One 3pin DMX cable

3. Two omega clamps

4. One user manual
ㄍFlight case, Safety cable and Clamps are optional, please contact your dealerㄎ
Please check carefully that there is no damage caused by transportation. Should
there be any, please consult your dealer and don’t install this device.

GENERAL GUIDELINES

This device is a lighting effect for a professional use on stages, in discotheques,
theatres, etc., The device was designed for indoor use only.
This fixture is only allowed to be operated with the max alternating current which
stated in the technical specifications in the last page of this manual.
Lighting effects are not designed for permanent operation. Consistent operation
breaks may ensure that the device will serve you for a long time without defects.

Do not shake the device. Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed
to extreme heat, moisture or dust. Please don’t project the beam onto combustible
substances. The minimum distance between light-output from the projector and the
illuminated surface must be more than 0,5 meter.

5

If you use the quick lock cam in hanging up the fixture, please make sure the quick
lock fasteners turned in the quick lock holes correctly.

Operate the device only after having familiarized with its functions. Do not permit
operation by persons not qualified for operating the device. Most damages are the
result of unprofessional operation.
Please use the original packaging if the device is to be transported.

For safety reasons, please be aware that all modifications on the device are
forbidden. If this device will be operated in any way different to the one described in
this manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to short-circuit, burns, electric shock,
lamp explosion, crash, etc.

SAFETY INSTRUCTIONS

CAUTION!

Be careful with your operations. With a dangerous voltage you can

suffer a dangerous electric shock when touching wires!

This device has left the factory in perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.

1. In order to guarantee the product’s life, please don’t put it in the damp places or
even the environment over 60degress.

2. Always mount this unit in safe and stable matter.
The qualified professionals are allowed to carry out the lamp installation, operation
and maintenance, but they must guarantee to operate in strict accordance with the
instructions referred to.

3. Using lamp, the change rate of power voltage should be within¨10%, if the voltage
is too high, it will shorten the light’s life; if it’s not enough, the lamp will be dark.

4. Please restart it after turning off light for 20 minutes until full-cooling. Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will improve
the life of bulbs and lamps.

ァ" Important:

Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.

If the device has been exposed to temperature changes due to environmental
changes, do not switch it on immediately. The arising condensation could damage
the device. Leave the device switched off until it has reached room temperatures.
This device falls under protection-class￥. Therefore it is essential that the device be
earthed.
The electric connection must carry out by qualified person.