Leedarson Lighting BHAKP001 Users Manual

Keypad

4AK1S70EN0

1

Home Security beyond the
Front Door

Ring Video Doorbells began a Ring of
Security around your entire property.

Ring Protect is the security system that takes
the Ring of Security a step further giving you
another level of protection for your property.

Now, you can arm and disarm your system,
prevent crime and protect your home - all
from your phone, tablet or PC.

2

Contents

1. Diagram

2. In-app Setup

3. Connecting the Device

4. Physical Installation

3

1. Say hello
to your
Ring Keypad.

4

Network

Battery

Faulted sensors

(bypass)

Number pad

Security ModesLED Ring

5

2. Set up your
Ring Keypad
in the Ring
app.

6

Set up your Ring Keypad near
your Base Station

In the Ring app, choose Set Up a Device.

Choose the Ring Keypad, then tap Add Device.

7

3. Connect your

Ring Keypad
to your base
station.

8

Plug the keypad into a wall outlet

Connecting the power supply to the keypad
and the wall turns on the device. Your base
station will find it.

9

Scan the QR Code or enter the
S2 PIN

The QR Code and PIN can be found on the
back of your device, on the box, or on the
card in this box.

Track the connection progress of
the keypad

Your keypad will try to connect to your base
station. The keypad’s LED ring will show the
progress.

Here are some common LED patterns:

Waiting to
connect

Connecting to
base station

Connected

Connected

Armed
(Stay and Away)

Disarmed
(Home)

Alarming

Blue Rotating

Blue Blinking

Blue Solid for

Blue Solid for
5 seconds

5 seconds

Red

Blue Solid

Red Flashing

11

4. Install your
Ring Keypad
on the wall.

Place your keypad

Move your keypad where you’d like it. It
should be somewhat near the door you
usually use to enter or exit the home.

You can place it on a table or mount it using
the reversible bracket.

View keypad history in the Ring
app

You should have a few history events from
installing your keypad. Check your app to
make sure it’s working.

14

Security that moves with you

Ring Protect has three security modes to
match whatever you’re doing.

Home

No sensors are monitored. Move
freely through the house.

Away

All sensors are monitored. Secure
your whole house.

Stay

Some sensors are monitored.
Freedom and security, mixed.

15

FCC Compliance Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference. (2)
This device must accept any interference received, including interference that may
cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

IC Compliance Statement

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.

© 2017 Bot Home Automation, Inc.

RING, ALWAYS HOME, and CHIME are trademarks of Bot Home Automation, Inc.

Last updated: 08/24/17

FCC Statement

15.19

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

15.21

Note: The grantee is not responsible for any changes or modifications not expressly approved by

the party responsible for compliance. Such modifications could void the user’s authority to operate

the equipment.

15.105(b)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help







IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired

operation.



Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.