Leedarson Lighting 7ASSZABCH User Manual

We build your success in IoT.

LEEDARSON Multi-Sensor

Content:

Multi Sensor ....................................................................................................................................................... 2

1. Product Introduction ............................................................................................................................ 2

2. Product Appearance ............................................................................................................................ 2

3. Specification ......................................................................................................................................... 3

4. Features/Capabilities ........................................................................................................................... 4

5. Installation Position and Notes ............................................................................................................ 4

6. Product Installation .............................................................................................................................. 5

7. Attention .............................................................................................................................................. 6

Multi-Sensor

Quick Start Guide

1. Product Introduction

The Multi sensor is designed for using with scenes in home automation systems, integrate motion, light ,
temperature and humidity sensors, powered by CR123A battery or USB cable. The Motion Sensor lets you
know when movement is detected in a certain area and can trigger different actions in response to that
movement (or lack of movement). It also lets you know the ambient temperature and humidity to trigger
different actions to make you more comfort. This sensor integrated Zigbee communication module to
connect with Zigbee gateway.

2. Product Appearance

Product appearance and function overview.

① Reset : Using the pin to press the reset button for 3 seconds then release the pin to reset the sensor.

After the reset, the sensor will be found by the App or the gateway when they search for the device.

② LED Indicator: If sensor has not been added to gateway, the LED will be blinking about one time per

second. The LED will turn off when joined to gateway successfully.

2

Detection Technology

PIR （Passive Infrared）

Detection Angle

100°±10°

Temperature Accuracy

±1℃

Humidity Accuracy

±5%

Communication Protocol

Zigbee

Radio Frequency

2.4G (2405-2480MHz)

Wireless Range

40m (Line of sight) outdoor
About 30m indoors (depending
on building materials)

RF Output power(E.I.R.P.)

6.3 dBm

Power Source

3V, CR123A *1

Power source USB connector

5V USB port, support external 5V power adapter

Battery Life

2 years

Mounting

Screws or 3M Tape

Mounting Height (recommended)

7.22 ft to 9.19 ft (2.2m to 2.8m)
recommend 2.5 meters

Mounting Location

Wall Surface

Operating Temperature

-10°C to + 45°C

Operating Humidity

Up to 85% non-condensing

Certifications

CE/FCC

Dimensions (mm)

51(L)X51(W)X67.5(H) mm (with mounting bracket)

OTA

Yes

3. Specification

3