WARNING: For indoor use only. Do not use in wet locations. The total current limit
② & ③
①
of the device is 15Amp.To avoid damage, Do not exceed the 15 Amps limit. If a direct
short is created on the output, the Smart Plug will be damaged and no longer
function. Do not disassemble the product, or make repairs yourself. You run the risk
of electric shock and voiding the limited warranty. If you need service, please contact
the after sales services.
1 Package Contents
Smart Plug *1
Quick start guide*1
2 Product Description
The plug turns your electrical appliances smart by enabling you to control them
through the smart home APP on your phone at or away from home. It also enables
you to automatically switch appliances on and off according to a programmable
timer and measure the energy consumption.
①Socket: Converts your traditional outlet and enables your plugged-in appliance
to become Smart and controllable with the App
② Button: Press once to switch on or off; press and hold to reset
③ Indicator Light: when the plug is operating, the light is blue; when the device is
turned off, the light changes to off
Feature list:
1) Remote Control: Turn your electronic device on and off from anywhere using the
mobile app.
2) Schedule: Set specific times for your device to turn on/off as setting connected
Input
120V~, 60Hz,15A
Output
120V~, 60Hz,15A,1800W(Resistive),1/2HP
Power consumption:
≤1W
Operational temperature:
0℃-40℃
Radio protocol:
Zigbee 2.4G
Range:
About 40m indoors (depending
on building materials)
Icon
Status
Behavior
Slow Breathing Green
Plug initiated, is ready to start plug network configuration
Quick Blinking Green
Connecting to the network
or disconnected from the network
Solid Green
Connected to the network and plug is turned on
Off
The Smart plug is Switched off
lighting turn on at 19:00 every Monday. Or like setting lights to come on at dusk
or turn off at sunrise.
3) Coutdown: set a countdown timer to have plug turn off automatically. As setting
after 30 minutes turn off automatically.
4) Energy Monitor: Measures the energy consumption of the connected device.
5) Supporting repeater role.
Specification
LED Indicator: Under normal working state, Green—on, Red—off.
If plug can not connected to Hub, please check your hub is working well then hold
and press the power key 5S of Plug to reset plug. Then repeat connection.
3 Installation and Operation
Step 1. Download and install the App
Get the Arnoo App for android or IOS from Google play or Apple store.
Step 2. Register and login
Open the app, and it will walk you through creating an account and login to the
home screen.
Step3. Add the Plug
Connect the smart plug to a grounded wall socket, back to the app to start plug set
up. From the home screen press the “+”symbol to add plug, follow the in-app
instruction to complete setup.
Please note:This Plug is a Zigbee plug, Zigbee hub is required. Before to setup plug,
please make sure your Zigbee hub is working well.
If plug can not connected to Hub, please check your hub is working well then hold
and press the power key 5S of Plug to reset plug. Then repeat connection.
Operation
1 on/ off
Click Plug icon to remote control on/off
2 timer countdown
Click timer countdown button to set timer countdown
3.Schedule
Click setting icon on the right corner to start Plug setting that included Schedule
setting
4 Energy Consumption report
Click the Energy icon from home page in to know Energy consumption report
4 Safety information
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
NOTE:This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if it is
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in an installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment in an outlet on a different circuit than the receiver.
4. Consult an experienced technician for help
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 8 inches (20 cm) between the radiator and your body.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
IC 20cm RF
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance of 8 inches (20 cm) between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements de
la IC é tablies pour un environnement non contrôé. Cet équipement doit
être installé et fonctionner à au moins 20 cm de distance d’un radiateur ou
de votre corps.
-----------------------------------------------------------------------------------------For more information, Welcome visit: www.leedarson.com.
Mail to: iot@leedarson.com
LEEDARSON LIGHTING CO., LTD.
XINGDA RD, XINGTAI INDUSTRIAL ZONE, CHANGTAI COUNTY, ZHANGZHOU,FUJIAN,
363900, CHINA
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.