Leedarson Arrival Sensor Quick User Manual

Leedarson Lighting

Leedarson Arrival Sensor

Quick User Guide

Draft

Ver.

Description

Time

Fu

V1.0

2016.10.10

V1.1

2017.06.02

Leedarson Lighting

1 Product Introduction

1.1 Basic Information

Arrival sensor integrated Z-Wave communication module to connect with Z-Wave gateway. By

real-time communication to verify if the device in the communication range of gateway, system can

automatically trigger some relative scenarios and send out messages to especial person.

1.2 System Diagram

*MID: Mobile Internet Device

1.3 Functions

a） Particular design for low power consumption, battery charging cycle up to

45 days

b） High performance RF design, visual communication distance up to 30m
c） Follow standard Z-Wave plus protocol
d） Build-in an acceleration sensor to control device sleeping and awaking for

power saving

e）Conveniently operations to connect and reset by a button inside back cover

f） LED indicator to show different status

1.4 Technical Parameter

1.4.1 Communication

Module name

6aB-SS-AG-C0

Protocol

Z-Wave

Frequency

908.42~916 MHz

Communication Distance

About 40m indoors (LOS)

Modulation Mode

FSK(BFSK/GFSK)

1.4.2 Power Supply

Operation Voltage

3.3Vdc

Current

37mA/3s

Arrival Sensor

Gateway

Scenarios

Router

MID*