LeEco Super4 X User Manual
Super4 X Series
User Manual
More than a TV — an experience
Powerful Multi-Core CPU and GPU processing brings every pixel to life in crisp,
brilliant color across ultra-high definition displays. Featuring premium Harman
Kardon® speakers*, your ecotv is the perfect centerpiece for any room.
*Not available on Super4 X43 Pro
Table of Contents
Getting Started
Warnings
What’s Inside
Opening Instructions
Assembly Instructions
Settings
Connecting Your TV
Powering On/O
Pairing the Remote Control
Remote Control Functions
Antenna Setup
Display
Sound
Interface & eui Apps
Android TV™
Introducing eui — Ecosystem User Interface
Other
Troubleshooting
Specs
Use & Safety
Certifications
TV Standard Limited Warranty
4
5
6
8
9
11
12
14
14
15
16
17
17
18
19
20
21
22
23
26
28
Getting Started
Warnings
What’s Inside
Opening Instructions
Assembly Instructions
Warnings
CAUTION
ELECTRIC S HOCK DO NO T O PE N
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sucient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
To reduce the risk of electric shock, do not remove
cover (or back). No user-serviceable parts inside. Refer
servicing to qualified service personnel.
Please read and follow all instructions that come with
this product. LeEco disclaims any liability for loss or
damage resulting from improper use or use contrary
to the product instructions.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
To prevent electric shock do not use this polarized
plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent
blade exposure.
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
This device contains chemicals known to the State
of California to cause cancer, birth defects or other
reproductive harm.
Les marquages sont inscrits en arrière de l’appareil.
Les précautions d’emploi sont inscrites en arrière de
l’appareil.
Pour réduire le risque d’incendie ou de choc électrique,
ne pas exposer cet appareil sous la pluie et l’humidité.
L’appareil ne doit pas être exposé aux écoulements ou
aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.La prise
du secteur est utilisée pour déconnecter le système.
La prise du secteur ne doit pas être obstruée ou doit
être facilement accessible pendant son utilisation.
Pour être complètement déconnecté de l’alimentation
d’entrée, la prise doit être débranchée du secteur.
Les piles ne doivent pas être exposées à de forte
chaleur, tels que la lumière du soleil, au feu ou autres
choses de semblable.
Des pressions acoustiques excessives provenant
d’écouteurs ou de casques peuvent provoquer des
pertes de l’audition.
5
What’s Inside: X43 Pro
Television Remote &
2 Stands Power Cord2 Bolts Cable
2 AA Batteries
Accessories
Stand Stand
6
What’s Inside: X55 & X65
Television Remote &
2 Stands Power Cord4 Bolts Cable
2 AA Batteries
Accessories
Stand Stand
7
Opening Instructions
Step 1: Cut straps from packaging.
Step 2: Remove the four lock clips
(squeeze tabs inward and pull out)*.
Step 4: Pull out accessories kit.
Step 5: Remove protective foam.
Step 3: Lift box lid from package base
*not applicable to Super4 X43 Pro packaging.
Step 6: Gently tilt and lower the TV, backside down,
until evenly aligned with foam cover.
8
B
Assembly Instructions
Installing the Stand
Step 1: Carefully lift TV out of box. Slowly set down with
the screen facing up. To avoid damaging the product,
use caution and refrain from pressing on screen.
Tip: Two People Recommended
Step 2: Locate holes corresponding to stands on each
side of TV base.
TV Bottom View
Step 3: Remove protective rubber covers and insert
stands (B), ensuring serial numbers are facing back side.
Once secured, fasten the bolts (C), on either side — 2
on X43 Pro and 4 on X55 and X65 models.
C
C
B
Note:
• Do not cover ventilation hole or put any object into
enclosure, such as newspaper, soft cloth, curtain, etc.
• Reserve adequate ventilation space around ecotv.
• Do not place your ecotv in any place where there
is vibration.
• Do not place ecotv close to air conditioner. Otherwise, moisture condensation may appear on interior
panel of display and damage the panel.
• Do not place ecotv in any area with strong electromagnetic field, otherwise, the TV may incur damage
and interference.
Step 4: Make sure there is enough surrounding space
as indicated below.
12 in
4 in 4 in
5 in
9
Installing a Wall Mount
It is advisable to consult a qualified professional. To avoid
electric shock, power o television prior to completing
these steps. LeEco maintains no liability for damages
or personal injury. Before installing, ensure the wall
will support the combined load of the equipment and
hardware. Consult your wall mount guide for weight
specifications and product-specific instructions.
• To ensure device stability, locate and align television
with wall studs.
• Follow diagram to ensure proper spacing around
the device.
• Two people recommended.
• Secure television to wall mount using VESA standard
wall mount screw locations:
o Super4 X43 Pro: 200x200mm
o Super4 X55: 400x200mm
4 in
12 in
4 in
15.75” x 7.87”
Wall Mount Screw Locations
o Super4 X65: 400x200, 200x200mm
10
Loading...