
PRODUCT DATASHEET
SMART+ Motion sensor
SMART+ Motion Sensor | Smart home electronics
AREAS OF APPLICATION
– For indoor use only
__
PRODUCT BENEFITS
– Automatic switching of SMART+ and other compatible ZigBee products via LIGHTIFY system
– Extremly small and unobtrusive
– Easy and flexible installation thanks to adhesive pad and wireless operation
PRODUCT FEATURES
– Controls lights, device groups or scenes automatically at detected motion
– Wireless smart PIR motion sensor
– Motion detection at the angle of 100° and range of up to 4.5 m
– Battery-powered
– Network protocol: ZigBee HA 1.2
April 14, 2018, 09:22:28 © 2018, LEDVANCE GmbH. All rights reserved.
SMART+ Motion sensor Page 1 of 3

TECHNICAL DATA
Electrical data
Nominal wattage 2.40 W
Nominal voltage 3.00 V
Dimensions & weight
PRODUCT DATASHEET
Product weight 36.00 g
Length 25.0 mm
Width 43.0 mm
Height 45.0 mm
__
Colors & materials
Body material Plastic
Additional product data
Type of Battery 3 V CR2 Lithium battery
Capabilities
Detection angle 100 °
Compatible smart home technology ZigBee
Certificates & standards
Type of protection IP20
EQUIPMENT / ACCESSORIES
– LIGHTIFY APP required
– LIGHTIFY Gateway required
LOGISTICAL DATA
April 14, 2018, 09:22:28 © 2018, LEDVANCE GmbH. All rights reserved.
SMART+ Motion sensor Page 2 of 3

PRODUCT DATASHEET
Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x
height)
4058075036208 SMART+ Motion sensor Shipping carton box
4
173 mm x 108 mm x 141 mm 2.63 dm³ 410.00 g
Volume Gross weight
The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more
single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.
DISCLAIMER
Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.
__
April 14, 2018, 09:22:28 © 2018, LEDVANCE GmbH. All rights reserved.
SMART+ Motion sensor Page 3 of 3