LEDLux STOREHAUGEN Series, STOREHAUGEN 200 LED, STOREHAUGEN 100 LED Instruction Manual

www.ledlux.no

STOREHAUGEN 100 LED / STOREHAUGEN 200 LED

Instruction Manual

LED Industrial Light (STOREHAUGEN Series)

Wire Connection

Connection box

external cable

Brown
Yellow/Green
Blue

Meanwell Driver

Model STOREHAUGEN 100 LED STOREHAUGEN 200 LED

Input Voltage 100-240~50/60HZ

Power

Factory(PF)

>92%

Rated Power
Consumption

100W 200W

Rated Color

Temperature

Pure white:5000-5500K warm white:4000-4500K

Rated Luminous

Flux

8000lm 16000lm

Color Rendering

Index(CRI)

≥70

Working

Temperature

-30~50°c

Working Humidity 10%~90%RH

Working life 50000h

Net weight 4.7kg 8.0kg

IP Rating IP65

Working Humidity 4-8m 10-20m

128 175

Bl

ue

Yellow/Green

Brown

Attention

Product Feature

Installation

● Please do not modify the lamp or change the parts by yourself to avoid the

damage, fault, re and electric shock accident.

● Please ask the qualied company or professional people to make installation

according to the instruction. If install without care it may cause fault, electric

shock, re accident and no warranty .

● When cleaning, please use a soft rag with liquid to make the cleaning rst, then

use a dry rag to remove dust and water. Please do not clean with corrosive

material to avoid the color fade and damage.

● When there is abnormal phenomena to the lamp, please cut the power

immediately and contact our local agent or professional engineer to check, do

maintenance, or replacement with new ones.

● If you have any questions to our instruction, please consult qualied engineer.

● The lamp body surface is anodized, it is corrosion protective and compact

structure.

● Green and eco-friendly lamp. No pollution to the environment, not containing lead

and mercury material.

● CREE led source, high efciency, long stable working life.

● Easy installation, can be used in all elds.

● Saving above 60% electricity comparing with the conventional lamps.

● Super long working life, very low maintenance cost.

● Power factory above 0.9. No bad affect to the power grid.

● Make a ¢ 10mm hole in the ceiling where you install the lamp and put the plug

inside the hole.

● Screw the hoop into the plug.

● Take the lamp out from the box and install the lamp hanging on the hoop.

(Contact Us if you need any special safety hook for the installations) For

mounting with arm, you have to follow the same procedure, but use bolts to the

ceiling/wall construction.

● The electric wire connection: Brown wire connect to (L) , Blue wire connect to (N)

, Yellow/Green wire connect to Earth, and make sure of insulation.

● Turn the power on. Make sure that lamp working fine, then finish the installation.

If any fault please contact your local dealer as soon as possible.

STOREHAUGEN 100 LED STOREHAUGEN 200 LED

Unit:mm