We thank you for choosing the projector STAGE PRO SPOT
650/1000/1200 PC.
To make the most of this unit and to make it work correctly
in the years, before connecting it to its source and using it,
we suggest you to carefully read this manual.
In this way you will be more familiar with it and its
connections and will be easier to use it.
User’s manual
product code: 991187
All the sections of this manual have been studied to make as easy and complete as possible the use of the STAGE
PRO SPOT 650/1000/1200 PC.
To make the manual more clear and easy to consult, we have used the following symbols and conventions:
very important warnings, to be read with the maximum attention;
important parts of the text that give details and/or explanations on the use of the
STAGE PRO SPOT 650/1000/1200 PC.
practical advices for an efficient use of the STAGE PRO SPOT 650/1000/1200 PC.
!
Make sure that the unit has not been damaged during the transportation.
In case it has happened or in case the unit does not work correctly, immediately contact the Retailer.
If the unit has been directly sent to you , immediately contact the Freight Company.
Only the final receiver (the person or the Company that receive the unit) is in the position to
complain for the above inconveniences.
The safety of the unit is guaranteed only strictly following the instructions, so it is recommended to
accurately preserve them.
YOUR REFERENCE
Cite the model and the serial number anytime you contact your retailer to ask for information or assistance.
STANDARD PACKAGE
The standard package of the projector STAGE PRO SPOT 650/1000/1200 PC contains:
1) Projector ON REQUEST:
2) Mains connector * Lamp (code 060261)
3) User’s manual * 4-Leaf barndoors (code 040102)
4) Guarantee * Black clamp Ø50 (code 194019)
5) Colour frame * Spare colour frame (code 040099)
IMPORTANT
!
IMPORTANT
!
1
fig. 1
STAGE PRO SPOT
650/1000/1200 PC
CODE 991187
fig. 2
290 mm.
370 mm.
400 mm.
TECHNICAL FEATECHNICAL FEA
TECHNICAL FEATECHNICAL FEA
TECHNICAL FEA
TURESTURES
TURESTURES
TURES
PMALPMAL
PMAL
PMALPMAL
5.9XGW0021/0001/056negolaH
PMALPMAL
PMAL
PMALPMAL
TNEMEVOM
.wercssseldnehtiW
LACITREVLACITREV
LACITREV
LACITREVLACITREV
TNEMEVOM
°54-/°09+
.)1.giF(noitatneirolaunaM
MAEBTHGILMAEBTHGIL
MAEBTHGIL
MAEBTHGILMAEBTHGIL
EDUTILPMA
2.giFotrefeR
REWOPTUPNIREWOPTUPNI
REWOPTUPNI
REWOPTUPNIREWOPTUPNI
.zH05;caV032:egatlovgnitarepolanimoN•
.W0021/0001/056:ylppusrewopdetaR•
.)caV032(A2.5/3.4/8.2:tnerruclanimoN•
GNIKROWGNIKROW
GNIKROW
GNIKROWGNIKROW
NOITISOP
.noitisopynA
SNOISNEMIDSNOISNEMID
SNOISNEMID
SNOISNEMIDSNOISNEMID
)HxDxW(
.)1.giF(004x073x092.mm
THGIEWTHGIEW
THGIEW
THGIEWTHGIEW
5.6.gK
YDOBYDOB
YDOB
YDOBYDOB
.muinimuladnaleetS
! Do not dismantle and modify the unit.
! Always make sure that you are using a safety chain (fig. 4).
! Do not install the unit outdoors directly exposed to rain or moisture.
! To avoid any inflammable liquids, water or metal objects entering the unit.
! To avoid installing the unit close to heat sources. Never to lean the connecting cable on the hot unit.
! The unit must be at a minimum distance of 30 cm. from the walls or from any inflammable material and 1 mt.
from lighted objects.
! The unit must be placed where it could be easily aerated. To avoid obstructing the in/out air gratings.
! Do not directly look at the Lamp when it is on.
BRACKET
LEVER FOR
INSERTING THE
COLOUR FRAME
AND THE 4-LEAF
BARNDOORS
MANUAL
ORIENTATION
KNOB
Amplitude
Distance in mt.
LIGHT BEAM
AMPLITUDE RELATED
TO DISTANCES
WW
WW
W
ARNINGSARNINGS
ARNINGSARNINGS
ARNINGS
The STAGE PRO SPOT 650/1000/1200 PC is already equipped with the Colour Frame (fig. 1 and 5).
To insert the filter in the Colour Frame, follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Take off the Colour Frame and insert the filter;
3) Take off the spring clip, insert the filter and put back the spring clip;
4) Put back the Colour Frame in its room making it sliding on its track.
To fix the 4-Leaf Barndoors (on request - fig. 3) follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Insert the 4-Leaf Barndoors in its room making it sliding on its track.
fig. 4
COLLEGAMENTCOLLEGAMENT
COLLEGAMENTCOLLEGAMENT
COLLEGAMENT
O FONTE DI ALIMENTO FONTE DI ALIMENT
O FONTE DI ALIMENTO FONTE DI ALIMENT
O FONTE DI ALIMENT
AZIONEAZIONE
AZIONEAZIONE
AZIONE
2
fig. 3
CODE 040102
STAGE PRO SPOT
650/1000/1200 PC
CODE 991187
POWER SUPPLY INPUT
The unit must be connected to the earth. The inobservance of
these instructions automatically makes the guarantee expiring.
! Before installing the STAGE PRO SPOT 650/1000/1200 PC, make sure that the carrying structure is safe and able to
support the weight of the unit.
The STAGE PRO SPOT 650/1000/1200 PC is equipped with a bracket with a hole in the middle (diam. 10 mm.) to fix
clamps and/or screw bolts (fig. 1 and 4).
To orientate the unit follow these instructions:
1) Unscrew the Manual Orientation Knob on the side of the unit (fig. 1);
2) Orientate the unit using the apposite handle at the back (fig. 4);
3) Screw the Manual Orientation Knob.
• It is possible to turn the bracket up or down.
! At the end of the assembling operations make sure that the unit has been correctly and safely fixed.
ASSEMBLINGASSEMBLING
ASSEMBLINGASSEMBLING
ASSEMBLING
Before connecting the unit to the mains, make sure that the working voltage and frequency correspond to the values
indicated on the label (fig. 4).
The STAGE PRO SPOT 650/1000/1200 PC is made to work at a working voltage of 230V 50Hz; 2.8/4.3/5.2 A (depending
from the Lamp).
The unit mains connections are described in fig. 4/a.
FIXING THE COLFIXING THE COL
FIXING THE COLFIXING THE COL
FIXING THE COL
OUR FRAME AND THE 4-LEAF BARNDOORSOUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORSOUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
LIGHT BEAM MANUAL
ORIENTATION KNOB
HANDLE
SAFETY CHAIN FIXING EYE
COVER
BRACKET
CLAMPING LEVER TO INSERT
THE COLOUR FRAME AND
THE 4-LEAF BARNDOORS
CONNECTION TCONNECTION T
CONNECTION TCONNECTION T
CONNECTION T
O THE POWER SUPPLO THE POWER SUPPL
O THE POWER SUPPLO THE POWER SUPPL
O THE POWER SUPPL
YY
YY
Y
IMPORTANT
!
It is recommended to use only filters with an high temperature resistance.
fig. 4/a
L = PHASE (Brown)
N = NEUTRAL (Blue)
= EARTH (Green - Yellow)
THREE POLES FEMALE CONNECTOR
FOR THE CONNECTION TO THE MAINS
LN
fig. 5
3
! Before operating any maintenance disconnect the mains.
For operating a correct maintenance of the STAGE PRO SPOT 650/1000/1200 PC follow these instructions:
1) Periodically clean the in/out air grates;
2) Periodically clean the lens and the reflecting parabole (fig. 5) using antistatic cloths and products.
! Do not absolutely use solvents or abrasive products.
MAINTENANCEMAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE
1) Disconnect the unit before replacing the Lamp. Always wear protective gloves and goggles.
2) Turn, the key at the bottom of the unit, for a quarter of turn left to right (fig. 5).
3) Open the cover (fig. 4 and 5).
4) Fit the new Lamp in its socket not forcing too much (fig. 5).
! Take care of not touching the glass of the new Lamp with the nude hands; in case it accidentally happens, clean
the Lamp bulb with a dry cloth and alcohol.
5) Close the cover, turning the key for a quarter of turn right to left.
In case of replacement of the Lamp or maintenance, never open the unit
unless are passed at least 15 minutes after it went off.
FITTING AND REPLAFITTING AND REPLA
FITTING AND REPLAFITTING AND REPLA
FITTING AND REPLA
CING THE LAMPCING THE LAMP
CING THE LAMPCING THE LAMP
CING THE LAMP
COLOUR FRAME
LAMP
REFLECTING
PARABOLE
LIGHT BEAM REGULALIGHT BEAM REGULA
LIGHT BEAM REGULALIGHT BEAM REGULA
LIGHT BEAM REGULA
TIONTION
TIONTION
TION
Correct regulation of the light beam:
• Turn the knob placed on the rear part of the unit (fig. 4);
• Turning the knob from right to left the light beam amplitude is reduced, from left to right it is enlarged.
To avoid any bad performance of the unit or the Lamp breakage
damaging the optics of the STAGE PRO SPOT 650/1000/1200
PC, replace the lamp as soon as its maximum average time
ends. The lens must be replaced when is evidently damaged
and if its efficiency has been reduced, for example from slits or
deep cuts.
KEY TO OPEN THE
LAMP ROOM
COVER
Rev. 12/2005 Working to make its products always more perfect, LED reserves the possibility to make technical changes during the production. The technical features and the drawings on this
manual are not binding for LED and they could be changed at any time without notice. LED it is not responsible for any inconvenience caused by an improper or different use of
the unit respect to the one for what it has been made.
IMPORTANT
!
LED s.r.l. : ZONA P.I.P. Contrada Pozzillo - Viale Saponaro D. Lotto G, N. 8 - 70016 Noicattaro (BA) - Italy
Tel. : +39/080 9906090 Fax. : +39/080 9906092/3
Web Site : www.ledsrl.it e-mail : info@ledsrl.it
Loading...