Ledj SPECTRA BATTEN12T3 EXTERIOR, LEDJ259 User Manual

www.prolight.co.uk
(Order code: LEDJ259)
User manual
SPECTRA BATTEN
12T3 EXTERIOR
1.
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
CAUTION!
INPUT VOLTAGE OF 100~240V
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION! TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any, consult your dealer and do not use the equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modications to this equipment are not
subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modication to the
equipment.
• Never let the power-cable come into contact with other cables. Handle the power-cable
and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not connect this equipment to a dimmer-pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system’s life.
• Do not expose to ammable sources or gases.
• Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the
power-cable.
• Make sure that the available voltage is between 100V/240V.
• Make sure that the power-cable is never crimped or damaged. Check the equipment and
the power-cable periodically.
• Avoid direct eye exposure to the light source while the product is on.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately. Have a qualied engineer inspect the equipment before operating again.
• If your product fails to function correctly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Prolight dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be carried out by a qualied technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual,
the product may suffer damage and the warranty becomes void.
Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks,
LED failure etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and property.
2.
Introduction
Features
• 12 x 3W tri-colour LEDs
• Beam angle: 40 degrees
• 0-100% dimming and variable strobe
• DMX channels: 1, 3, 3, 4 or 5 selectable
• Static colour, colour fade, colour change, colour mix, auto, master/slave and DMX modes
• 3 push button menu with LED display
• IP rated power in/out sockets
• IP rated 3-pin DMX in/out sockets
• Power consumption: 50W
• Power supply: 100-240V~50/60Hz
• IP rating: IP-66
• Dimensions 619 x 120 x 140mm
• Weight: 2.6kg
Overview
Setup
Operating Instructions
The Spectra Batten 12T3 Exterior is a DMX-512 controllable unit made up of high efciency RGB LEDs and will operate in stand alone, master/slave or DMX control modes.
Identication:
1, Tightening knobs
2, Mounting bracket
3, Power in
4, DMX in 5, DMX out 6, Power out
7, LED display
8, Mode button 9, Up button 10, Down button
Spectra Batten 12T3 Exterior Introduction
3.
Lumen chart:
Included Gobos:
0 (M)
RGB
40˚ - Lux
2600 779 345 205 140
1
2 3
4 5
Loading...
+ 8 hidden pages