Ledj Slimline 5Q5, Slimline 7Q5, Slimline 229 IR User Manual

www.prolight.co.uk

Slimline 5Q5

Order code: LEDJ58 - Black (RGBW)

Order code: LEDJ58A - White (RGBW)

Slimline 7Q5

Order code: LEDJ59 - Black (RGBW)

Order code: LEDJ59A - White (RGBW)

Order code: LEDJ59B - Black (RGBA)

Order code: LEDJ59C - White (RGBA)

USER MANUAL

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

CAUTION!

Keep this equipment away from rain,

moisture and liquids.

SAFETY INSTRUCTIONS

Every person involved with the installation, operation & maintenance of this
equipment should:

- Be competent

- Follow the instructions of this manual

CAUTION! TAKE CARE USING THIS EQUIPMENT!

HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

Before your initial start-up, please make sure that there is no damage caused during
transportation. Should there be any, consult your dealer and do not use the
equipment.

To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.

Please note that damages caused by user modications to this equipment are not

subject to warranty.

LEDJ Slimline 5Q5, 7Q5 Safety

LEDJ Slimline 5Q5, 7Q5 Safety

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused

by the non-observance of this manual or any unauthorised modication to the

equipment.

• Never let the power-cable come into contact with other cables. Handle the power-cable

and all mains voltage connections with particular caution!

• Never remove warning or informative labels from the equipment.

• Do not open the equipment and do not modify the equipment.

• Do not connect this equipment to a dimmer-pack.

• Do not switch the equipment on and off in short intervals, as this will reduce the

system’s life.

• Only use the equipment indoors.

• Do not expose to ammable sources, liquids or gases.

• Cleaning must be done at regular intervals.

• Before cleaning, wait until the unit has cooled.

• Use a vacuum or dry compressed air and a soft brush to remove the dust collected on the
external vents and accessible internal components.

• Clean the external surfaces with a mild solution of non-ammonia glass cleaner or

isopropyl alcohol and wipe with a soft, lint free cotton cloth or lense cleaning tissue.

• Always disconnect the power from the mains when equipment is not in use or before
cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the

power-cable.

• Make sure that the available voltage is between 100V-240V.

• Make sure that the power-cable is never crimped or damaged. Check the equipment and

the power-cable periodically.

• If the equipment is dropped or damaged, disconnect the mains power supply immediately.
Have a qualied engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic temperature uctuation (e.g. after

transportation), do not switch it on immediately. The arising condensation might damage
the equipment. Leave the equipment switched off until it has reached room temperature.

• If your product fails to function correctly, discontinue use immediately. Pack the unit

securely (preferably in the original packing material), and return it to your Prolight dealer
for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be carried out by a qualied
technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.

• WARRANTY; One year from date of purchase.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual,

the product may suffer damage and the warranty becomes void.

Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks,

LED failure etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and property.

You should nd inside the LEDJ carton the following items:

1, Slimline 5Q5 or 7Q5 2, Instruction manual 3, Power cable

Technical Specications:

DMX channels: 2, 3, 4 or 7 selectable
400Hz refresh rate
4 push button menu with LED display
Beam angle: 25 degrees
5 or 7 x 5W quad-colour LEDs
Optional I.R. remote (LEDJ90C)

Convection cooled
Power consumption:
Power supply:
Dimensions:
Weight:

Operating modes: 1, Static colour mix mode
2, Built-in programmes
3, Slave mode
4, Sound active mode
5, DMX mode
6, DMX channel mode

Overview:

LEDJ Slimline 5Q5, 7Q5 Technical specications

5Q5

38W
100-240V~50/60Hz
202 x 99 x 224mm
2Kgs

7Q5

45W
100-240V~50/60Hz
202 x 99 x 224mm

2.5Kgs

DMX INPower Out DMX OUT

MODE ENTER UP DOWN

www.prolight.co.uk