Ledj INTENSE 12D4 CW, INTENSE 12D4WW User Manual

Order code: LEDJ253
User manual
INTENSE 12D4 CW/WW
LED SLIM PANEL
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
CAUTION!
Keep this equipment away from rain,
moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION! TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any, consult your dealer and do not use the equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modications to this equipment are not
subject to warranty.
LEDJ Intense 12D4 CW/WW LED Slim Panel Safety
LEDJ Intense 12D4 CW/WW LED Slim Panel Safety
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modication to the
equipment.
• Never let the power-cable come into contact with other cables. Handle the power-cable
and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not connect this equipment to a dimmer-pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Cleaning must be done at regular intervals.
• Before cleaning, wait until the unit has cooled.
• Use a vacuum or dry compressed air and a soft brush to remove the dust collected on the external vents and accessible internal components.
• Clean the external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol and wipe with a soft, lint free cotton cloth or lense cleaning tissue.
• Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the
power-cable.
• Make sure that the available voltage is between 100V/240V.
• Make sure that the power-cable is never crimped or damaged. Check the equipment and
the power-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power supply immediately. Have a qualied engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic temperature uctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature.
• If your product fails to function correctly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Prolight dealer
for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be carried out by a qualied technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void.
Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks, LED failure etc.
Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and property.
You should nd inside the LEDJ carton the following items:
1, Intense 12D4 CW/WW LED Slim Panel 2, Instruction manual 3, Power cable
Technical Specications:
DMX Channels: 2 or 4 selectable 12 x 4W CW/WW LEDs
Beam angle: 28 degrees
Built-in programmes, auto, master/slave and DMX modes
IEC power in sockets
3-Pin XLR in/out sockets
4 push button menu with LED display
Twin hanging / oor bracket
Convection cooled
Power Consumption: 60W Power supply: 100-240V ~ 50/60Hz Dimensions: 260 x 93 x 295mm
Weight: 2.5Kgs
Overview:
Setup
Operating Instructions
The Intense 12D4 CW/WW is a DMX-512 controllable, full CW/WW colour mixing Par Can made up of high efciency 4W LED’s. There are two colour groups (cool white and warm white) whose
intensity can be controlled individually allowing the creation of an unlimited range of colour temperatures.
The Intense 12D4 CW/WW will operate in Stand-alone, Master/Slave and DMX-512
control modes.
LEDJ Intense 12D4 CW/WW LED Slim Panel Technical specications
INTENSE 12D4 CW/WW
LED SLIM PANEL
Identication:
1. Hanging / oor bracket
2. Earth screw
3. LED display
4. Function buttons
5. DMX input socket
6. DMX output socket
7. IEC power in socket
8. IEC power out socket
9. Hanging bracket tightening knobs
10. Safety bond point
11. Clamp mounting point
10
11
Loading...
+ 8 hidden pages