Ledj Artisan 2000, Artisan 2000 Dual White Fresnel, Artisan 1200 WW Profile User Manual

Artisan 2000

RGBWA Fresnel

User Manual

Order code: LEDJ333

Safety advice

WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.

• Should there be any damage, consult your dealer and do not use the equipment.

• To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.

• Please note that damages caused by user modications to this equipment are not subject to warranty.

CAUTION!

KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING
THIS EQUIPMENT!

HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.

• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the equipment and do not modify the unit.

• Do not connect this equipment to a dimmer pack.

• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.

• Only use the equipment indoors.

• Do not expose to ammable sources, liquids or gases.

• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.

• Make sure that the available mains supply voltage is
between 100~240V AC, 50/60Hz.

• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.

• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualied
engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic
temperature uctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.

• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Pro Light
dealer for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.

• This lighting xture is for professional use only - it is
not designed for or suitable for household use. The
product must be installed by a qualied technician in
accordance with local territory regulations. The safety of
the installation is the responsibility of the installer. The
xture presents risks of severe injury or death due to re
hazards, electric shock and falls.

• Warning! Risk Group 2 LED product according to
EN 62471. Do not view the light output with optical
instruments or any device that may concentrate the beam.

• WARRANTY: One year from date of purchase.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and/or property.

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual

2

Product overview & technical specications

Artisan 2000 RGBWA Fresnel

The Artisan 2000 RGBWA Fresnel is ideal for schools, churches and stages and
makes an ideal replacement for tungsten xtures. Control of the unit is facilitated via
a 4 button menu and LCD display, whilst the beam angle can be manually adjusted.
A handy IR remote control is included and an optional W-DMX Compatible Transceiver
can be added into the back panel.

• 1 x 200W ve-colour COB LED (RGBWA)

• Manually adjustable beam angle: 20°- 50°

• 20° - 9,498 Lux @ 2m (full on),
50° - 2,680 Lux @ 2m (full on)

• 2.8kHz refresh rate

• DMX channels: 5/6/7 or 9 selectable

• Artisan Series W-DMX USB compatibility for
wireless master/slave or DMX control

• 0-100% dimming and variable strobe

• 4 dimming curves: Linear, square law,
inverse square law and S-curve

• 4 push button menu with LCD display

• PowerCON input/output

• 5-Pin XLR input/output

• Temperature controlled fan for whisper quiet operation

• Handle on rear panel

• Filter frame and barn doors included

• Supplied with IR remote

20° - Lux
FULL ON
R
G
B
W
A

37992
6672
13684
2724
12136
5148

9498
1668
3421
681
3034
1287

4221
740
1520
302
1348
572

2374
417
855
170
758
321

1519
266
547
108
485
205

Specications Artisan 2000 RGBWA Fresnel

Power consumption 210W

Power supply 100~240V, 50/60Hz

Fuse T3A 250V

Dimensions 365 x 300 x 482mm

Weight 6.1kg

Order code LEDJ333

50° - Lux
FULL ON
R
G
B
W
A

0m 2m 3m 4m 5m1m

10720
2184
4404
916
3936
1720

2680
546
1101
229
984
430

1191
242
489
101
437
191

670
136
275

57.2
246
107

20°

428

87.3
176

36.6
157

68.8

50°

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual

3

365mm

Technical specications

300mm

195mm

167mm

187mm

167mm

220mm

150mm

482mm

40mm

190mm

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual

4

15

04

05

Technical specications

13

12

14

03

06

07

02

11

10

01

08

09

01 - Earth point

02 - LCD display

03 - Function buttons

04 - Colour frame release mechanism

05 - Zoom adjustment

06 - 5-Pin DMX input

07 - 5-Pin DMX output

08 - PowerCON input

09 - PowerCON output

10 - Fuse: T3A 250V

11 - Wireless DMX USB input

12 - Hanging bracket

13 - Hanging bracket adjustable knob

14 - Carry handle

15 - Barn doors

In the box: 1 x xture,

1 x barn doors,
1 x IR remote,
1 x power cable
& 1 x user manual

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual

5

DMX MODE

CHAN: 05

Operating instructions

DMX MODE

ADDR:001

MANUAL

RED: 000

DMX MODE

ADDR:001

DMX MODE

ADDR:512

MANUAL

RED: 000

MANUAL

RED: 255

MANUAL

GREN: 000

MANUAL

GREN: 255

MANUAL

BLUE: 000

MANUAL

BLUE: 255

DMX MODE

CHAN: 06

DMX MODE

CHAN: 07

DMX MODE

CHAN: 09

MANUAL

STROB: 00

MANUAL

STROB: 99

DMX
address
setting

Manual
dimming
mode

MENU

CLR MACS
COLOR: 00

AUTO RUN

FAD+SNAP

MANUAL

WHIT: 000

MANUAL

WHIT: 255

MANUAL

AMBE: 000

MANUAL

AMBE: 255

CLR MACS
COLOR: 00

CLR MACS
COLOR: 25

CLR MACS
COLOR: 26

CLR MACS
COLOR: 44

AUTO RUN

SPEED:00

AUTO RUN

SPEED:99

CLR MACS

STROB:00

CLR MACS

STROB:99

CLR MACS

SPEED:00

CLR MACS

SPEED:99

Auto run mode

Colour/macro mode

www.prolight.co.uk Artisan 2000 RGBWA Fresnel User Manual

6