Ledgo LG-A6 Instruction Manual

LG-A6 Cable Dimmer

Components:

Instruction Sheet

LG-

A

6

Instructions:

1. Connect the LG-E60 to the corresponding power adapter or the 18650 lithium battery.

2. Connect the aviation plug of the LG-A6 to the corresponding aviation socket of the
LG-E60.

3. Then buckle the LG-A6 cable dimmer to the back of the LG-E60 (Picture 2).

4. Turn on the switch on the LG-E60.

5. Adjust the brightness by the dimmer knob of LG-A6 cable dimmer controller.

6. After using it, turn off the switch, then loosen the connector of the aviation plug, slide
the LG-A6 cable dimmer controller out from the slot at the back (Picture 3).

(Picture 2) (Picture 3)

Notice:

1. When connecting the wire joint, please connect with the docking points as marked
accordingly.

2. Please keep moistureproof when storing the light.

General Breakdown Service

① ② ③

.

① Aviation Pl ug : Fo r connecti ng with the co ntr olled LG-E 60 lights.
②.Clamp Bu ckle For cla mpi ng to the back s ide of LG-E6 0 lig hts.
③.Dimmin g Knob: For ad jus ting the bri ghtness of L G-E 60 lights.

(Picture 1)

Description of Breakdown

1) Please check if the adapter is normal and the voltage is correct.

The light can not li ght up normally

Flicke ri ng a bn or ma ll y

Please contact the local dealers or manufacture for maintenance service if the faulty
problems are still not solved after taking the breakdown analysis and exclusion as
above.

2) Please check if there is any loose connection between the
adapter and the panel

3) Please check if there is any loose connection between the
panel and controller.

1) Please check whether the power adapter is compatible with
sufficient output capacity.

2) Please check if it's near any high temperature objects and
make the operation environment temperature too high.

Measurements

LEDGO TECHNOLOGY LIM ITED

Add:Zhanglin Section,Highway324,Dongli,Chenghai,Shantou City,Guangdong Province,China

Tel:[phone] Fax:[phone]

E-mail:[e-mail] http://www.ledgo.hk