
SRAES3
Audio Output Adapter
TECHNICAL DATA
The output of any SR Series receiver can be delivered
in analog or digital audio formats using this adapter. The
Output Mode Selector Switch determines audio format.
The unit will work with all receiver versions to provide
audio in the following formats:
• AES3/EBU - AES3 digital audio at 48 kHz sampling
with an internal clock
• W/WORD CLOCK - AES3 digital audio with an
external word clock at 44.1, 48 or 96 kHz sampling
• ANALOG - Balanced analog audio from -50 dBu to
+5 dBu in 1 dB steps
Supplied as a kit with power
cord and hardware
The standard multi-pin interface is the same on all SR
Series receiver output adapters. The housing is machined from a solid aluminum billet for ruggedness.
A 75 ohm termination of the word clock connection is applied by a jumper, installed by default at the factory.
75 ohm jumper
The jumper can be removed if not required by your word
clock distribution system.
In the AES Modes, one or two channels of digital audio
are delivered from the CH1 Jack. The selected diversity
and mix mode functions on the receiver will determine if
the CH1 and CH2 outputs deliver the same audio signal
or two separate audio signals.
Output mode selector
Spare mounting
screw on each side

Optional Power Cables
21425
6 ft. long power cord; coaxial to stripped & tinned leads.
Coaxial plug: ID-.080”; OD-.218”; Depth- .5”.
.475”
.375” O.D.
21472
6 ft. long power cord; coaxial to stripped & tinned leads.
Right angle coaxial plug: ID-.075”; OD-.218”; Depth.375”
.375”
.35”
.375” O.D.
21586
DC16A Pigtail power cable, LZR stripped & tinned.
Thread lock collar.
Optional Audio Cables
MCSR/5PXLR5P
Audio output cable; RATPAC 5-pin
to XLR5M; channel 1 and 2 signals
MCSR/5PXLR1
Audio output cable; RATPAC 5-pin
to XLR3M; channel 2 signal
MCSR/5PXLR2
Audio output cable;
RATPAC 5-pin to (2) XLR3M;
channel 1 and 2 signals
21747
2174 6
PS200
Locking LZR style plug
to stripped and tinned; 6
feet long.
Locking LZR style plug to
stripped and tinned; 12
inches long.
Hirose 7-4 pin to LZR
type locking plug, 12”
long.
MCSRXLR
TA3F to XLR3M;
15 in. length
MCXLRF
AT3F to XLR3F;
12 in. length
MCSRTRS
Dual TA3F to
male 3.5mm TRS
MCSRPT
TA3F to stripped and
tinned; 15 in. length

Output Matrix
Specifications
Digital Output
Type: AES3/EBU
Output Level: -11 dBFS
Sample Rate
Internal clock: 48 kHz
External clock: 44.1, 48 or 96 kHz
THD: 0.15%
Output Connectors: TA3 male (mini XLR)
Word Clock Input
Parameter: Standard TTL level
Termination: 75 ohm (removable)
Connector: BNC
Analog Output
Type: Balanced
Output Level: -50 to +5 dBu in 1 dB steps
THD: 0.15%
Power Requirements: 7 min. to 18 max. VDC
(with SRc receiver) • 345 mA at 7 VDC
• 200 mA at 12 VDC
• 135 mA at 18VDC
581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com
(505) 892-4501 • (800) 821-1121 • fax (505) 892-6243 • sales@lectrosonics.co
03 November 2017