Lectrosonics RCWTEL User Manual

RCW-TEL

LECTROSONICS

RCW-TEL

TELECONFERENCE

PRIVACYCONNECT

VOLUME

UP

DOWN

Wired Remote Controller
for the Telephone Hybrid

Feature Highlights

• Transparent operation with respect to the
TH3, i.e. front panel controls are replicated
on the RCW-TEL

• Connected directly to the

Port

(DB-9) of the TH3

• Remote functions include connect/
disconnect, privacy , and receive volume
up/down

• LED indicators for the remote functions

• Works with telephone or codec interface, or
use two RCW-TELs to control both

The RCW-TEL provides the main operating con­trols for the TH3 hybrid in a remote location.
The circuit board is mounted to a single-gang
wall plate. Soft touch switches and highly
visible LEDs provide simple, intuitive operation
and instant recognition of the status of the TH3.

Remote Control

T M

Operating Instructions

V

The RCW-TEL is connected to the TH3 via the tele- Pin 4 (VD) - Volume Down Switch function - decreases
phone or codec DB-9
wiring configuration has the following format:

Pin 1 (CS) - Connect/Disconnect Switch function ­connects or disconnects the interface.

Pin 2 (PS) - Privacy Switch function - mutes the Pin 6 (CL)Connect/Disconnect LED - indicates if the
transmitted audio, received audio, or both according interface is connected.
to the selected privacy mode. (see TH3 manual for
details)

Pin 3 (VU) - Volume Up Switch function - increases
the receive volume level by 1 dB until volume limit
is reached.

Remote Control Ports

. The the receive volume level by 1 dB until volume limit is

reached.
Pin 5 (PL) - Privacy LED - indicates if the privacy

function is currently active.

Pin 7 (GND) - Ground connection.

Control Connector

Connect

Privacy

Volume Up

olume Down

NC

Privacy LED

Connect LED

Ground

NC

TH3 Remote

1
2
3
4
5
6
7
8
9

RCW-TEL

Connector

5
3
2
1

4
6
7

CS
PS
VU
VD

PL
CL
GND

RCWTEL-0301

581 Laser Rd NE - Rio Rancho, NM - 87124 USA
[phone] [phone] Fax[phone]
www.lectrosonics.com [e-mail]