Lectrosonics MI33PRA, MI33PST Data Sheet
MI33PRA/MI33PST
SHIELD
TIP
PIN
5
4
3
2
1
S
LEEVE
1/4 " PLUG
1
2
3
4
5
AUDIO
TA 5F
PLUG
SHIELD
AUDIO
Passive Instrument Cables
TECHNICAL DATA
MI33PRA
• For use with all TA5 wired transmitters,
including IM, LM, LMa, UM400, UM400a, SM
Series, DB, DBa, LMb and LT models
• Passive design for use with “instrument”
input on LT transmitter, or with very high
output instrument pickups such as electric
bass guitars with 18 volt systems
• Designed for musicians who demand
rugged, high quality equipment and the best
sound quality available
• 30 inch overall length
Wiring diagram
MI33PST
Transmitter Setup Instructions
Play at the same level expected during the performance and adjust the input gain until the -20 LED
flickers red (indicating +0 dB) during the loudest
passages.
Adjust transmitter gain for
occasional red flashes at -20
SM Series LM, LMa, IM LMb, LT
-10
-20
PWR
-10 -20
-10
-20
Other cables available:
MI39ARA and MI39AST
Active cables for use with passive pickups or low-output
instruments only, with IM, LM, LMa, UM400, UM400a,
SM Series, and LMb transmitters.
31 July 2017
Rio Rancho, NM, USA
www.lectrosonics.com
Loading...