Lectrosonics MCSR/5PXLR2, MCSR/5PXLR1 Data Sheet
MCSR5PXLR1 & 2
5
4
3
2
1
CH 2
-
CH 2
+
CH 1
-
CH 1
+
GND
3
-
2
+
1 GND
TA5F
XLRM
PIN
PIN
3
1
2
5
4
3
2
1
CH 2
-
CH 2
+
CH 1
-
CH 1
+
GND
3
-
2
+
1 GND
3
-
2
+
1 GND
TA5F
XLRM
XLRM
PIN
PIN
3
1
2
3
1
2
A
v
a
i
l
a
b
l
e
R
a
n
g
e
180˚
Adapter Cables for SR Series Receivers
TECHNICAL DATA
These cables are designed specifically for the front 5-pin
output jacks on SR/5P and SRa5P receivers. The most
common applications are with the cameras that have
a wireless receiver slot, however, they are also useful
in portable “bag systems” to privide a second pair of
audio outputs to feed recorders, transmitters, etc. The
5-pin jack on the cable is a unique design in a machined
aluminum housing that can be rotated to adjust the cable
exit direction to keep the cables safe and out of the way.
MCSR5PXLR1
The single cable is commonly used to bring the second
audio channel out of the receiver when the camera has
a single audio channel in the the slot. The dual cable is
used to bring both audio channels out of the front panel
5-pin connector.
MCSR5PXLR2
Right angle TA5F plug (RATPAC connector) to one 3-pin
XLR; balanced output; 20 inches long.
Right angle TA5F plug (RATPAC connector) to two 3-pin
XLR; balanced outputs; 20 inches long.
Set screws can be loosened
to allow the 5-pin jack to be
rotated for the desired cable
direction.
Set
Screw
Set
Screw
Rio Rancho, NM, USA
www.lectrosonics.com
Loading...