Lectrosonics DNTWP Data Sheet

DNTWP

Dante™ In-Wall I/O Interface

• 2 balanced XLR mic/line inputs

• 2 balanced XLR line outputs

• 802.3af compliant PoE powered to work with
any compliant PoE network switch

• Three input gains accommodate common line
levels, phantom power and dynamic mics.
Input gains are adjustable via software on a
per input basis

• +48V Phantom power per channel powers
virtually all types of phantom powered
microphones typically used in installed AV
systems

• ID LED allows easy identication of which
unDX2IO Attero Tech’s Unify software is
communicating with

TECHNICAL DATA

The DNTWP Dante™ Audio Interface is a cost effective
multi IO wall box. The unDX2IO features two balanced
mic/line XLR inputs and two balanced XLR line outputs.
All inputs and outputs can be used simultaneously and
all audio channels are available separately. The un­DX2IO is designed to fit into most dual gang US junction
boxes and is PoE enabled, so all connectivity (power and
data) is provided by a single CAT-5 cable. The unDX2IO’s
size and IO density make it easy to put Dante connectiv­ity wherever it’s needed near the audio source or sink
thereby eliminating costly and interference prone analog
wiring.

Front Panel Connections:

XLR Inputs 1 and 2 - Balanced and RF filtered. 0dB,
+25dB, and +40dB gains software selectable. +48V
phantom power available and software.

XLR Outputs1 and 2 - Balanced and RF filtered line
level outputs.

ID LED - Blinks to allow easy identification of a specific
unDX2IO under software control.

Specifications

Mic/Line Input Type: Balanced and RF filtered 3-pin depluggable
Phantom Power: +48V, software selectable
Mic/Line Gain: 0dB, +25dB, +40dB, software selectable
Input impedance: >1.8K ohms at any gain setting
Equivalent Input Noise: 115dBu (+40dB gain)
Maximum Input Levels: +8dBu @ 0dB gain, 16dBu @ +25dB gain,

31dBu @ +40dB gain
Output Type: Balanced line level with automatic muting on

loss of Dante signal
Output Gain: 0dB
Output Noise: <90dBu @ 0dB gain
Maximum Output Level: +12dBu
System THD: 01% at any gain, input signal 3dB

below maximum
PoE Class: Class 0 802.3af PoE PD compliant
Certifications: FCC Part 15 Class A, CE

(EN 60950 and EN 55022 Class A)
Dimensions: 3.60” W x 2.75” H x 1.88” D
Operating Temperature: 0°C - 40° C

581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com
[phone] • [phone] • fax [phone] • [e-mail]

Oct 10, 2013

Front Panel Connections:
XLR Inputs 1 and 2 - Balanced and RF filtered. 0dB, +25dB, and +40dB gains

software selectable. +48V phantom power available and software.

XLR Outputs1 and 2 - Balanced and RF filtered line level outputs.
ID LED - Blinks to allow easy identification of a specific unDX2IO under

software control.

Specifications

Mic/Line Input Type: Balanced and RF filtered 3-pin depluggable
Phantom Power: +48V, software selectable
Mic/Line Gain: 0dB, +25dB, +40dB, software selectable
Input impedance: >1.8K ohms at any gain setting
Equivalent Input Noise: 115dBu (+40dB gain)
Maximum Input Levels: +8dBu @ 0dB gain, 16dBu @ +25dB gain,

31dBu @ +40dB gain
Output Type: Balanced line level with automatic muting on

loss of Dante signal
Output Gain: 0dB
Output Noise: <90dBu @ 0dB gain
Maximum Output Level: +12dBu
System THD: 01% at any gain, input signal 3dB

below maximum
PoE Class: Class 0 802.3af PoE PD compliant
Certifications: FCC Part 15 Class A, CE

(EN 60950 and EN 55022 Class A)
Dimensions: 3.60” W x 2.75” H x 1.88” D
Operating Temperature: 0°C - 40° C

581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com
[phone] • [phone] • fax [phone] • [e-mail]

Last edit date