Lectrosonics BATTSLED User Manual
BATTSLED
Universal Power Supply Adapter
This handy accessory provides extended operating time
and serves as a backup power supply for Lectrosonics
transmitters and receivers. Common “L” and “M” style
video camera rechargeable batteries are retained by
spring tabs in the bottom plate. 9 volt batteries can also
be used with the optional SR9VBP adapter.
The power output is a threaded locking coaxial connector that is used on many Lectrosonics products. The
connections are fused at 500 mA and diode protected
against reversed polarity.
The unit is constructed of machined aluminum and stainless steel to provide the ruggedness needed for field
production. A Velcro swatch is included for mounting the
adapter on a flat surface.
TECHNICAL DATA
Battery not included
PSLZRDUAL
(included)
The 6 ft. power cable can be used as is, or cut to
desired length and terminated as needed to create
two separate cables of equal or different lengths.
WARNING
This adapter is NOT for use in recharging
batteries. Do not connect a battery charger
to the output jack.
Rio Rancho, NM, USA
www.lectrosonics.com
Mounting and Removing Batteries
.475” O.D.
Locking collar with
5/16”-32 thread
Allow the
battery to clear
the contacts.
Press battery
in flush with
the adapter.
Hold battery
flush and slide
up onto the
contacts.
DO NOT insert
battery contacts
before pressing
battery into the
adapter.
Optional Accessories
Part numbers and model
numbers (in CAPS) for optional
accessories are listed here.
BCHINGED spring loaded belt clip
21425 power cord, 6 ft.
21721
power
plug
.475”
.375” O.D.
To remove
battery, press
locking tab
in and slide
battery out of
the adapter.
Optional SR9VBP Battery Adapter
This adapter allows the BATTSLED to be powered by
two 9 volt batteries. It mounts in the same manner as
rechargeable camera batteries (shown above).
21472 power cord, 6 ft.
These power cords
have a threaded,
locking collar.
21746 rt. angle, 12 inch
.375”
.35”
.375” O.D.
21747 rt. angle, 6 ft.
21586 straight, 6 ft.
581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com
(505) 892-4501 • (800) 821-1121 • fax (505) 892-6243 • sales@lectrosonics.com
30 March 2011
Loading...