Lectrosonics AMJ22, AMJ24, AMJ25, AMJ26 Datasheet

AMJKIT

AMJ KIT CUTTING TEMPLATE

TECHNICAL DATA

Jointed Whip Antenna

The AMJ antenna is a general purpose design for any
Lectrosonics receiver or transmitter with a standard SMA
connector. The hinged joint pivots in both directions for
positioning the whip at any desired angle.

Lay uncut antenna on this template and cut to length for the desired frequency block

Whip Length

*Cut end of cap off
and slide over whip

Tr im the end of the color cap and slide the remaining sleeve over the whip - OR - Glue color cap onto the end

944

21 September 2011

470

30

28

29

31

32

33

26

27

Frequency Blocks

23

24

25

21

22

20

19

*Color cap

Note: Check the scale of your printout. This line should be 6.00 inches long (152.4 mm).

BLOCK FREQUENCY CAP/SLEEVE ANTENNA
RANGE COLOR WHIP LENGTH

470 470.100 - 495.600 Black w/ Label 5.56” 141.2 mm

19 486.400 - 511.900 Black w/ Label 5.27” 133.9 mm

20 512.000 - 537.500 Black w/ Label 4.93” 125.2 mm

21 537.600 - 563.100 Brown w/ Label 4.71” 119.6 mm

22 563.200 - 588.700 Red w/ Label 4.48” 113.8 mm

23 588.800 - 614.300 Orange w/ Label 4.27” 108.5 mm

24 614.400 - 639.900 Yellow w/ Label 4.07” 103.4 mm

25 640.000 - 665.500 Green w/ Label 3.87” 98.3 mm

26 665.600 - 691.100 Blue w/ Label 3.68” 93.5 mm

27 691.200 - 716.700 Violet (Pink) w/ Label 3.52” 89.4 mm

28 716.800 - 742.300 Grey w/ Label 3.36” 85.3 mm

29 742.400 - 767.900 White w/ Label 3.22” 81.8 mm

30 768.000 - 793.500 Black-w/Label 3.08” 78.2 mm

31 793.600 - 819.100 Black-w/Label 2.97” 75.4 mm

32 819.200 - 844.700 Black-w/Label 2.89” 73.4 mm

33 844.800 - 865.000 Black-w/Label 2.81” 71.4 mm

944 944.100 - 951.900 Black-w/Label 2.53” 64.3 mm

The hinged joint pivots in both directions

Rio Rancho, NM, USA
www.lectrosonics.com