Lechler 5TM.408.1Y.AS, 5TM.208.1Y.AS, 5TM.406.1Y.AS, 5TM.410.1Y.AS, 5TM.210.1Y.AS Installation And Operating Manual
Installation and Operating
1 1/2 BSPP
1 1/2 BSPP
1 1/2 BSPP
Manual for Tank and Equipment Cleaning Nozzles
Series 5TM
22
144
259
Ø 122
150
22
144
259
Ø 122
150
22
144
259
Ø 122
150
This instruction manual
contains proprietary information which is protected by
copyright laws.
No part of this document
may be copied or transmitted
for any purposes in any form
either electronically or mechanically without prior written
authorization.
Lechler GmbH is not liable for
damages resulting from using
components or spare parts
which are not original parts of
Lechler GmbH.
All other brands or brand names which are not mentioned
here can be trademarks or registered trademarks and need
to be treated accordingly.
© Lechler GmbH,
Ulmer Straße 128,
72555 Metzingen/Germany
All rights reserved.
CONTENT Page
1 Scope 3
2 Intended use 3
3 General 3
4 Explanation of symbols 3
5 Disposal 3
6 Foreseeable misuse 3
7 Marking 3
8 Delivery scope 3
9 Delivery inspection 4
10 Safety 4
10.1 General information 4
10.2 Operating personnel 4
10.2.1 Requirements 4
10.2.2 Instruction and training assistance 4
10.3 Personal protective equipment 4
10.4 Safety instructions 4
10.4.1 Surrounding 4
10.4.2 Special risks 5
11 Installation 5
11.1 Preparation 5
11.2 Installation of the threaded connection 5
11.3 Checks 5
12 Start-up 5
13 Frost protection 6
14 Maintenance 6
14.1 General 6
15 Quality assurance 6
16 Technical data 7
2
1. Scope
This instruction manual is intended for people who are commissioned with the installation and operation of the device.
5. Disposal
The machine must be disposed of properly according to the
national requirements and laws.
For more information, please contact
Lechler GmbH
Ulmer Straße 128
72555 Metzingen / Germany
Tel. +49 (0)7123 962 – 0
Fax +49 (0)7123 962 – 444
www.lechler.de
2. Intended use
Lechler tank and equipment cleaning nozzles are hydraulically
driven components which are used in tanks and equipment for
cleaning and rinsing. Other applications are not intended and
are not permitted.
3. General
In the following term “rotating cleaning nozzle” is used instead
of “Lechler tank and equipment cleaning nozzle”.
4. Explanation of symbols
Warnings are indicated by symbols. The instructions are preceded by signal words which express the degree of risk.
Follow the instructions and act cautiously in order to avoid
accidents, personal injury and property damage.
DANGER!
indicates an imminently hazardous situation resulting in death or serious injury if not avoided.
CAUTION! Environmental damage from chemical cleaning agents! If chemical agents are added
it must be ensured that these do not reach the
ground, water or the sewer system.
In Conclusion:
Always collect chemical cleaning agents in suitable cont-
ainers.
Dispose of chemical cleaning agents properly.
6. Foreseeable misuse
Any use other than defined in the section “Intended use”
without written approval of the manufacturer.
Operation beyond the technical application limits.
Unauthorized modifications or conversions, as well as mani-
pulation of the machine.
Work executed by non-qualified personnel.
Using unsuitable or incompatible materials, auxiliary materi-
als, operating materials or accessories.
Non-compliance with safety and operating instructions, and
health and safety accident prevention regulations or legal
regulations.
Using spare parts and accessories other than originals,
which are not equivalent in quality and function.
7. Marking
Symbols and signs are located in the working area. They refer
to the immediate surrounding of the machine on which they
are displayed.
WARNING!
indicates a potentially hazardous situation which
could result in death or serious injury if not avoided.
CAUTION!
indicates a potentially hazardous situation which
could result in minor injuries if not avoided.
CAUTION!
indicates a potentially hazardous situation which
could result in property damage if not avoided.
NOTE!
provides useful tips and recommendations as well
as information for ecient and trouble-free operation.
WARNING! Risk of injury through illegible
signs! In the course of time labels and symbols on
the machine can get dirty or illegible in a dierent
manner.
In conclusion:
Always keep safety, warning and operating instructions in
legible condition on the machine.
Replace damaged signs or labels immediately.
8. Delivery scope
One piece of the high impact tank cleaning machine “IntenseClean” series 5TM.
NOTE!
If one series contains dierent types, please refer to
the details on the shipping documents.
3
Loading...