Lebensstil Kollektion LKIH-7122W User Manual
Dear Customer:
You are now the proud owner of one of the finest and most modern
appliance that today’s technology can produce. You and your new hob
are going to make a great team together. Once you have tried the
Induction technology, you will probably not be going back to any other
types of electrical cook tops again. But first you should get to know the
product so as to gain the maximum benefit from it. This book contains
information on how to operate and care for your hob so that you may
gain the maximum benefit from it. Please read all the instructions,
carefully before operating the hob and store this book in a safe place for
future reference.
CREATE RECORD FOR FUTURE USE
Purchase Date : __________________________
Model Number: __________________________
Serial Number : __________________________
NOTE
The Serial and Model numbers may be found on the serial
number and rating label located under the hob.
QUESTIONS?
Pls Write To :
Kollektion Distribution Sdn. Bhd.
Lot 11A, Jalan 223, Section 51A,
46100 Petaling Jaya,
Selangor Darul Ehsan, Malaysia
For Toll- Free Telephone Support:
Care Line 1-800-881-770
For Online and Product Information:
www.kollektion.com.my
1
Safety Instructions
IMPROTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance. Save these instructions
for future reference. This manual contains important safety symbols and
instructions. Please pay attention to these symbols and follow all
instructions given.
WARNING
This symbol will help alert you to situations concerning your
personal safety
INFOMATION/PRACTICAL TIPS
This symbol will provide information’s that are useful to you
WARNING
To reduce the risk of fire, electrical shock, or injury when using
Radiant Ceramic Hob, follow the basic precaution including the
following.
Remove all tapes and packaging wrap before using the appliance.
Never allow children to play with the packaging materials.
WARNING
In the event your appliance malfunctions or is damaged switch
“OFF” all cooking zones and disconnect the hob from the
electricity supply to avoid from possibility of electric shock
WARNING
Always ensure service is carried out by qualified personnel
2
About Induction Hob
The installation and connection of the new appliance MUST be
carried out by qualified personnel
Repairs to the appliance are only to be carried out by approved
service personnel. Repairs carried out by inexperienced persons may
cause injury or serious malfunctioning. If your appliance needs
repairing, please contact the nearest Service Centre.
WARNING
The Induction Hob generates short range electromagnetic field.
Person with a pacemaker or other active implants should exercise caution
using or standing near the induction hob, when it is in operation. It would
be advisable to consult your Doctor or the pacemaker or other active
implants device manufacturer about your particular condition.
INFOMATION/PRACTICAL TIPS
Please follow these instructions, otherwise the warranty would
not cover any damages that may occur.
Flush mounted appliances must only be operated following installation
in suitable cabinets and workplaces. This ensures sufficient protection
against contact of electrical components.
This appliance is not intended to be operated by means of an external
timer or separate remote control system.
The Induction hob has induction elements located below the surface
of the ceramic glass. The design on the hob outlines the area of the
induction element underneath.
The Induction Hob works on the principle of electromagnetic field,
hence it will only heat up a magnetic metallic object when placed on
3
the cooking zone. Once a magnetic metallic object (pan) is placed, an
Model
Rated
Voltage
Rated Wattage
Range
Dimensions in mm
(W x L x H)
LKIH-7122W
220240V
50Hz
3540 – 3700W
(L-2300W x R- 1400W)
420 x 720 x 47
electromagnetic field circulates between the induction elements and
the magnetic metallic pan, which instantaneously heats the pan
and the content within it. As only the pan is heated up there is no
residual heat on the cook top and the only heat would be of that,
which had been transferred from surface of the pan to the
surrounding. This is because the element itself does not produce heat
Note: As the induction elements create an electromagnetic field with
metallic objects, hence item such as knives, forks, spoons,
and lids which are made of metallic materials should not be
placed on the hob surface as it may become hot.
The Induction Hob is inbuilt with a Pan Detection, which would detect
that the cooking zone is ON but no pan is detected/placed on the
cooking zone or the pan is not made of metallic object.
Note: The hob MUST be switched off after use by switching the
power to OFF and not relying on the “Pan Detector” to shut off
the power.
NOTE
Induction elements have a limiter that allows the element to
alternate between ON and OFF, even at the highest power level
setting.
Note: L – Left Cooking Zone
R – Right Cooking Zone
4
Model Appearance
Induction Hob Model
LKIH-7122W
LKIH-7122W
5
50 mm
50 mm
50 mm
30 mm
Installation Guide
Hob Installation
Fig. 1
50 mm
LKIH-7122W
The tabletop groove for the hob should be made according to size of
the models (please refer to the diagrams below for the groove
measurements). Please ensure a clear space of minimum 50mm
around the hob. The tabletop must be at least 30mm thick and made
of heat resistance material to avoid deformation or damage. (Please
refer Fig. 1)
For operational purposes it is best to ensure there is sufficient
ventilation available. As shown in the diagram below. (Fig. 2)
Groove Opening
6
50 mm
760 mm
130 mm
Fig. 2
Electrical Connection
WARNING
Always ensure the mains have been turned off when connecting
the wiring to the hob or when disconnecting the wiring from the
hob
Before connecting, check that the nominal voltage of the appliance,
which is the voltage stated on the rating label (shown in Fig. 3
below), corresponds to the available supply voltage. The rating label
is located on the bottom of the hob.
The hob is to be connected to the mains using the “terminal block”
that allows the appliance to be disconnected from the mains at all
poles.
The connection must be carried out as per the diagram in Fig. 3.
7
Loading...