Learn & Climb STAY IN BED User Manual

USER MANUAL

STAY IN BED

L I G H T C L O C K

1

SAFETY INSTRUCTIONS pg. 3

VISUAL GUIDE pg. 3

WHAT'S INCLUDED pg. 4

SETUP pg. 4

SETTING THE TIME FORMAT AND TIME pg. 5

NIGHT LIGHT SETTING pg. 6

AUTO OFF FUNCTION pg. 6

ALARM SETTINGS pg. 7, 8, 9

ADVICE AND SAFETY pg. 10, 11

ABOUT

The Stay in bed clock, is a fun clock that can help kids learn about
time and helps parents get more time to sleep! The Stay in Bed
clock, can also be a Night-light, when your little one is sleeping.

You will nd the Stay in Bed clock useful for kids to learn time and

wake up at the right time!

2

SAFETY INSTRUCTIONS

Please read these safety instructions completely before using this product
for your protection.

• For safety reasons, all warnings and operating should be followed and adhered to.

• All packing materials, such as tape, plastic, sheets, packaging locks, wire ties and tags
are not part of this toy, and should be discarded for your child’s safety.

• Please keep this user’s manual as it contains important information.

• Please protect the environment by not disposing of this product with household waste.

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may
cause undesired operation.

VISUAL GUIDE

3

WHAT'S INCLUDED IN THIS PACKAGE

• 1 Stay in Bed Light Clock

• 1 USB Power Cable (USB Power Supply not included)

The supplied USB Power Cable can be used with any USB Power Supply.

SETUP

This Clock can be powered with either the USB Cable or 3 AA batteries (batteries are not
included).

USING BATTERIES

1. Locate the battery cover on the bottom of the unit and open

it with a small Philips screwdriver.

2. Insert 3 AA batteries as illustrated

3. Replace the battery cover and tighten the screw

USING THE USB POWER CABLE

1. Take the supplied USB Power cord and plug it into the Power port on the back of the
clock.

2. Insert the other end of the USB Power Cable into a USB Power Supply (not included),

and then insert into a regular 120V Outlet.

Once the batteries are inserted or the clock is plugged into an outlet the Clock will

beep and the screen will display “12:00 AM”. At this time you can set the time.

4