LeapFrog Tumbling Blocks Fire Truck Parents' Manual

608300 manual.indd 1 05/24/2019 09:44:58

This guide contains important information. Please keep it for future reference.

Parent’s Guide

91-003726-000

US

INTRODUCTION

Thank you for purchasing the Tumbling Blocks Fire Truck™.
Head out on a learning mission with Scout! Place a letter block
in the driver's seat to hear the name of the letter, the animal
on the block and the letter sound. Raise the ladder to send
the blocks tumbling down, then lower it to autoload another
learning block for tumble-down fun.

Ladder

Mission
Button

608300 manual.indd 2 05/24/2019 09:44:59

Driver’s
Seat

Music
Button

On/Off/
Volume
Control
Switch

Hose Dial

Letter

Block

Number

Dial

Five Letter Blocks

2

INCLUDED IN THIS PACKAGE

• One Tumbling Blocks Fire Truck™

• Five letter blocks

WARNING:

All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.

NOTE:

Please keep this parent’s guide as it contains important
information.

ATTENTION :

Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.

NOTE :

Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.

Note:

Please cut and discard
the cords before playing
with the unit. The cords
are not part of the
product and should
be discarded for your
child’s safety.

608300 manual.indd 3 05/24/2019 09:45:01

3

Unlock the packaging locks:

Rotate the packaging locks 90

degrees counterclockwise.

Pull out the packaging locks.

GETTING STARTED

BATTERY REMOVAL AND INSTALLATION

1. Make sure the unit is turned Off.

2. Locate the battery cover on the bottom of the unit.

3. Use a screwdriver to loosen the screw and open the battery cover.

4. Remove old batteries by pulling up on one end of each
battery.

5. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)

6. Replace the battery cover and tighten the screw to secure.

608300 manual.indd 4 05/24/2019 09:45:01

4