leahua 90W COB PAR WW User Manual

90W COB PAR WW

User Manual

This manual contains important information.
Please read before operating fixture.

1

1. SECURITY TIPS

WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:

 non-professionals, not to disassemble the light arbitrarily and

lighting accessories inside.

 rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ

(to be selected).

 not beam irradiate the flammable materials, flammable materials

and the lamp should be maintained at least 1M over the distance.

 lamps used in ambient temperature: -15 ℃ -40 ℃, the highest

temperature of the surface of the lamp: 60 ℃.

 to keep away from the liquid substance and humid environment.
 before using the lights must ensure the good grounding, can not

install charging and remove any parts.

 the installation of lamps, must be fixed screw fasteners with

additional security cable and regular inspection.

 lamps consecutive working hours is not recommended more than

10 hours.

 should stop using the lights in time when happens unusual

conditions during the process

 lamp parts of the rotation, external accessories and paste parts

should be regular inspected, such as the emergence of loose and
rock, should be reinforced in a timely manner to prevent the
accident.

 lamps adopt strong winds to refrigerate, it is easy to accumulate the

dust, so you have to clean it weekly especially the cooling air

opening, otherwise the dust will plug leading to poor light

2

2 TECHNOLOGY REFERENCE

Power supply : AC100~240V / 50~60Hz
Power consumption:100W
Led: 90W warm white COB LED
DMX channels: 1/2/3CHS
Function: DMX, Auto, Sound ,Master-slave, strobe ,dimmer
Housing Material : Aluminum
Strobe : 1-30/sec.
Projects no shadows
Flicker Free
Protection:IP20
LCD blue display
PowerCon In and Out
Carton Packing size: 320*300*320mm (1pc/CTN)
N.W. : 2.5Kg

3 Board Instruction

MENU UP DOWN ENTER

1~Press MENU Can circulate 9 different functions. The front 2Digits
mean the function it has. (Please see the function form as follow.) And
the last 2Digits mean the function’s address, speed or parameter. Press
UP or DOWN can change the value. And press ENTERto confirm.

2~Press MENU more than 2sec. The 2Digit number will flash. Then
press UP or DOWN can change the value quickly. Then press the
ENTER to save the value you want. If you don’t want to save the value,
press MENU more than 2sec. is okay.