leahua 7pcs RGBWA LED Par light User Manual

Add：A1 Building The Sixth Industrial Zone Zhu Gang Road Hongxing Shijing Town Baiyun

District Guangzhou China.

Tel：[phone] Fax：[phone]

7pcs RGBWA LED Par light

User Manual

This manual contains important information.
Please read before operating fixture.

1

www.leahualight.com

1. SECURITY TIPS

WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:

 This device for indoor use only，the protection grade is: IP20
 Installing of the light must keep a distance with any flammable objects by 5m at

least. The distance between the light and the projected objects must be no less
than 1m.

 Please never directly install the light on the surface of the flammable objects.
 The installation、operation and maintenance must be managed by the qualified

professional, and make sure to operate it under the instruction of the Manual.

 Make sure the work environment temperature of the light maximum 35℃, and

minimum -20℃

 The temperature of the light surface will up to 60℃ even under the normal

cooling, so never touch it by hand.

 The light was designed by electric shock protection type, and must connect to the

power supply system which well earthed. Furthermore, the ground wire of the
light must connect to the ground wire of the power supply system, ground wire
interface of the light must well connect with the light body (or light must be well
earthed)

 Please check if the voltage is in accordance with the rated power before

installing.

 Please never use the power cable which was damaged the insulation cover,

meanwhile, never put the power cable on any other wire. Please pull out the
power cable by handle the plug when light is stop working or cleaning, never
pull out it roughly or handle the wire directly.

 The light doesn’t include any spare parts for repairing , please check if all the

parts are well installed and screws are drove tightly before operating. It’s

prohibited to use the light when the cover is opened.

Notice: Please make sure it is power off before any installation,
repair and clean

2

www.leahualight.com

2 TECHNOLOGY REFERENCE

 Control Channels: 9DMX Channels
 Beam Angel: 40°
 Control Mode: AUTO, Master/Slave, DMX512, Sound Active
 Working Environment: Indoor, -20℃-40℃
 Mixing Color: RGBWA mixing color
 IP Grade: IP20
 Power Supply: AC 100-240V/50-60Hz
 LED Unites: 7PCS×10W (RGBWA 5in1)
 Power consumption: 70W
 Packing size: 22.5×10×22.5Cm 47×32×49Cm
 N/W: 1.8KG(1pc/CTN) G/W: 2KG(1pc/CTN) 24Kg(12pcs/CTN)

3 Board Instruction

MENU UP DOWN ENTER

1~Press MENU Can circulate 9 different functions. The front 2Digits
mean the function it has. (Please see the function form as follow.) And
the last 2Digits mean the function’s address, speed or parameter. Press
UP or DOWN can change the value. And press ENTERto confirm.
2~Press MENU more than 2sec. The 2Digit number will flash. Then
press UP or DOWN can change the value quickly. Then press the
ENTER to save the value you want. If you don’t want to save the value,
press MENU more than 2sec. is okay.