Leagoo AP200 User Manual

LEAGOO WiFi Smart US Plug Dual Outlet

User Manual

AP200

FunctionKeyandIndicatorDescription

Long press the power button for about 5 seconds, blue indicator flashes means the
product begin enter into the distribution network mode.

Short press the power button, red indicator lights up means power on, red indicator
lights off means power off.

TechnicalParameters

Maximum current: 15A
FCC ID:2AQMH-AP200
Rated voltage: 120V
Rated power: 1800W
Input voltage range: 100-125V
Wireless Type: Wi-Fi 2.4GHz

Operating temperature: 0 ℃ - 40 ℃
Support system: Android \IOS

TurnOnIntelligence

Use your phone to scan the QR code below or search “smart life” in
application market to download and install the App

Step 1: Registration and login "smart life" APP.

If you don't have the account of “Smart life” APP,register an account or sign in with
cellphone number +verification code.This page describes the Registration process.

1.Tap“Register”in the upper right（pic 1）

2.The system automatically determines your country / area.You can also select your
country code by yourself.Enter the cellphone number/E-mail and tap “Next” （pic 2）

3.If you enter the mobile cellphone number，enter the verification code in the message
（pic 3），and enterthe password，tap"Confirm" to finish your registration.

4.If you enter the E-mail，enter the password （pic 4），tap” Confirm" to finish your
registration.

Make sure your phone is connected to WiFi in your home. Click "+" in the upper right
corner of the homepage and select "Electrical outlet" from the device type.

Step 2: Connect with the power supply, long press the power button more than 5
seconds until the blue indicator enters into the fast flash mode.Select confirm indicator
rapidly blinks.

Step 3: Enter your WiFi password for your phone and click "Confirm" to enter the
page of the search device.

Step 4: Enter the device page, then complete the configuration