Page 1
Electric Kettle 600ml
G0000816
Instruction Manual
Thank you for choosing the Leaf & Bean
Electric Kettle.
To ensure proper operation and to maintain the
lifespan of your appliance, please read these
instructions carefully before first use.
Product Overview
A. Lid
B. Handle
C. Stainless steel body
D. On switch/indicator light
E. Power base
A
B
C
D
• The power cord should not be hung over the
edge of any table or touch a high temperature
surface. Please try to prevent any damage to
the power cord.
• The kettle will not move when working.
• Unplug the power cord and let the kettle cool
before cleaning.
• If the power cord is damaged, it must be
replaced by either the manufacturer or
its maintenance department, or similar
professional personnel.
• This kettle is not suitable for children,
disabled people, or anyone who is not familiar
with the appliance.
• This appliance cannot be used outdoors.
• If the electric kettle is too full, boiling water
may overflow.
• Use this kettle only on the matching base.
• Please keep these instructions for future
reference.
Packaging and Recycling
The materials used for this product’s packaging
can be reused, recycled and disposed of through
specific waste streams.
• REUSE: Keep packaging to safely store or
transport your appliance, preventing damage.
• RECYCLE: Look for recycling symbols on
packaging components to identify if they are
recyclable. Check with your local authority
to find out what materials are accepted for
recycling in your area.
• DISPOSE: Look for symbols on packaging
components and dispose of materials
accordingly.
E
Safety Instructions
• Please read these instructions carefully
before using the appliance.
• Make sure the outlet voltage is corresponding
to the voltage stated on the rating label of this
appliance.
Technical Information
Voltage/Frequency 220-240V~50/60Hz
Power 1000-1200W
Capacity 600ML
Before First Use
Pour a decent amount of water into the kettle
(not exceeding the maximum water level), boil
and discard. Repeat this step twice before
boiling water for drinking.
Page 2
Operating Instructions
• Open the lid and fill the kettle with water to
your desired level.
• Place kettle onto the power base and plug
in the power (the indicator will turn on for a
second and turn off).
• Press the switch button once and the kettle
will enter a boiling state (the indicator will
light up). When the water temperature
reaches 100°C, the power is switched off
automatically and the indicator will turn off.
Tip: The amount of water is strictly prohibited
from exceeding the maximum scale and must not
appear below the minimum scale. If it exceeds the
maximum scale, boiled water may overflow and
spill out, causing an injury.
Care Instructions
• This appliance cannot be used next to high
temperature objects. Please do not dry in an
anhydrous state, otherwise damage to the
heat plate and heating pipes are likely.
• If water in the kettle is too little or accidentally
dries during use, the power cord should be
unplugged. Allow it to cool down and then add
cold water.
• When using, the kettle should be placed on a flat
surface and not easily accessible to children.
• Do not immerse this appliance in water or
other liquids.
• When water is boiling, do not touch the steam
escaping from the nozzle and do not rush to
open the lid as this avoids being scalded by
steam.
• When the kettle is not completely cooled
down but needs to be refilled, be careful when
opening the lid.
• Please make sure the lid is fully locked before
turning on the kettle. Do not open the lid when
the kettle is on. The automatic Switch Off may
not work if the lid is not fully closed.
• Do not open the lid when pouring boiling water.
• This kettle is only intended for boiling water,
not coffee, tea, alcohol or chemicals.
• Do not touch the high temperature surface of
this kettle when boiling to avoid scalding.
• After boiling, do not press the switch to avoid
damage to the thermostat.
• To keep this kettle in good working condition,
it must be cleaned frequently. When cleaning
the kettle, make sure to disconnect the power
cord and wipe the kettle shell with a damp
cloth. Do not immerse the kettle in water
during cleaning.
Our 12-month Guarantee
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for
a major failure and compensation for any other
reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired if the
goods fail to be of acceptable quality and the
failure does not amount to a major failure.
We stand by this product. Therefore we offer a
12-month guarantee on the heating element.
The benefits of this guarantee are in addition to
any rights and remedies imposed by Australian
Consumer Law. Our guarantee excludes normal
wear and tear and instances where care and use
instructions have not been followed.
What IsAlbi will do: During this guarantee
period, IsAlbi will repair, replace or refund any
defective product. If identical product is not
available for replacement, a similar product
may be offered. IsAlbi asks you to cover the cost
of postage/transit if the product needs to be
sent back to us for inspection. If IsAlbi deems
the product is defective, we will reimburse
your postage/transit expenses. IsAlbi will
be responsible for the postage/transit of the
repaired/replacement product back to you.
What to do: If a fault/defect is identified, cease
using the product immediately.
To make a claim on this guarantee, take the
product, proof of purchase and full details of
the alleged defect to the retailer from whom the
product was purchased. If you cannot access
the retailer or are unsatisfied with the solution
offered by the retailer, contact IsAlbi via the
details below.
IsAlbi
87 Chifley Drive, Preston, Victoria 3072
P: +61 (03) 9474 1300
E: [email protected]
www.isalbi.com.au
Loading...