Leadtek Research LR3616 Users Manual

L

V

C

EADTEK

ideo Surveillance

MOS
Network Camera Series

Network Surveillance Camera 3615

&

Wireless Surveillance Camera 3616

User Manual

2

T

W

echnical Support

Technical Support provides services of Leadtek Research Inc. video surveillance
product series, including latest firmware/software upgrade, camera lens introduction,
PT rotating controls. Technical Support will also assist customers with the product
installation, hardware and configuration trouble-shooting.

Please visit the website below or mail us via the email address.

 Web site: www.leadtek.com
 Email: [e-mail]

Technical Support and Warranty Information

arranty Information

No parts of this document may be copied or reproduced in any form or by any means
without the prior written consent of Leadtek Research Inc.

Leadtek makes no warranties with respect to this documentation and disclaims any
implied warranties of merchantability, quality, or fitness for any particular purpose. The
information in this document is subject to change without notice. Leadtek reserves the
right to make revisions to this publication without obligation to notify any person or entity
of any such changes.

Provide the following information when warranty repair is required:

1. Model name and production serial number (label begins with a ¡L¡)

2. Date of shipment, P.O. number, sales order number, Leadtek corporation invoice
number.

3. Detail description for product issues encountered .

Trademarks or brand names mentioned herein are trademarks or registered

3

trademarks of their respective owners.

Copyright 2008 Leadtek Research Inc. All rights reserved

International Headquarters

18th Fl., 166, Chien-Yi Rd., Chung Ho, Taipei Hsien, Taiwan (235)
Phone: +886 (0)2 8226 5800
Fax: +886 (0)2 8226 5801

4

Table of contents

Product Features 6

Overview - NSC 3615 7

- WSC 3616 8

Interface

System
Requirement

Introduction 10

Configure the
Network Camera

9

9

- Start 11

- ActiveX Viewer 11

Login the
Network Camera

- IPCAM Discoverer 12

- Internet Explorer 13

Web Layout 14

- System 15
* SIP 16
* APS 17
* Others 17
* DIDO 19

* Surveillance

20

Password

- Network 21
* IP 21
* FTP 22
* SMTP 23

5

* DDNS 24
* Port Setting 25

- Wireless 26

- Camera 27
* Camera 27
* Encode Type 28
* Call To 29
User
Management
System
Information
System Log 32

Appendix 33

FAQs 38

Warning 40

30

31

6

P

Product Features

roduct Features

Network Camera can help you to view live surveillance video/audio over
Ethernet/Internet. With its compact color CMOS lens 1.3Mega Pixel, MPEG-4/H.263
video and G.711/G.729 audio compression, built-in microphone, two-way audio
communication with SIP protocol, the in-time monitoring can be flexibly extended to the
Telephony world, such as interoperated with Video Phone/3G mobile etc.

Key Features

 Compact Color CMOS (1.3M pixel)
 MPEG-4, H.263 video and G.711/G.729 audio compression
 JPEG capture via Motion Detection
 Internet connection compatible with Ethernet
 Built-in web server for remote management
 Bundled VoIP software client SoftPhoneR for portable communication
 Bundled NETCAM management software client for remotely use
 Inter-operation with Video Phone
 Two-way audio transmission
 Flexible installation solution
 802.11b/g for WIFI standards

7

O

VerView Network Surveillance Camera 3615

Internal Microphone

CMOS Lens

Product Features

Network Indicator LED

Access Incoming Indicator LED

SIP Registration Status Indicator LED

Camera Rotate Switch

External Microphone

Network
Connector

Power
Connector

Restore Default Button

Reset Button

I/O terminal

Audio Out

Connector

8

O

verView Wireless Network Surveillance Camera 3616

Internal Microphone

Product Features

Network Indicator LED

Access Incoming Indicator LED

SIP Registration Status Indicator LED

Camera Rotate Switch

External Microphone

Antenna

Restore Default Button

CMOS Lens

Reset Button

Antenna Connector

I/O terminal
Connector

Network

Power
Connector

Connector

Audio Out

9

I

S

nterface Connector

Network connector ¡ RJ-45 Ethernet Connector
Antenna connector ¡ 2.0 dbi external swivel Antenna for transmitter and receiver
Power connector ¡ DC connector 3- 5V DC, 2.5A max 10W
Build-in Microphone ¡ 5M, Omni directional
External Microphone ¡ 3.5mm mono earphone jack
Audio out ¡ mono jack output, 50mW PC compatible
I/O terminal connector ¡ alarm, motion, event triggering notification
LED Indicator ¡ indicators show as follows:

Product Interface

Operation System Windows 2000, XP SP2, Windows Vista
CPU Intel Pentium 4 2 GHz equivalent processor, 512MB RAM
Network Protocol TCP/IP, PPPoE, DHCP, Static IP, DDNS, SMTP, FTP, NTP

LED Color Indication
Network Blue 10/100Mbit/s LAN network connection activity.
Amber Wireless network connection activity.
Unlit No network connection.
Access Flashes Subscriber Incoming Entry.
Unlit No connection.
SIP Amber SIP Registration Successfully.
Flashes SIP Registration Failure.
Flashes Both of amber indicator flashes for upgrade status.

ystem Requirement

Web Browser Internet Explorer 6.0 or higher, Firefox
Ethernet Interface 10/100 Mbps Ethernet Card for network connection
Others CD-ROM/DVD, Video card supports 32-bit color, 80G HDD

10

Introduction

High-quality, High efficiency video & audio transmission via IP network

The network surveillance camera allows you to view live video over internet. Your control center can
be set up anywhere with internet access without being restricted by locations. Surveillance video is
processed by the most up-to date compression technology and transmitted in MPEG-4 compression
format, whose transmission efficiency and video quality remain uncompromised by the network,
minimizing the lagging of live surveillance video. In addition, wireless LAN is also supported. The
wireless model makes the network usage more handy without the hassle of cable installation.

Great usability in every surveillance aspect

The network surveillance camera¡s ease of use begins with its web-based user interface, using
Microsoft Internet Explorer to browse the live video or the provided Windows client Surveillance
Management Center (SMC) that offers many additional benefits: its user interface can display video up
to 9 camera servers at the same time. Recording can also be done simultaneously and you can use it
to view recorded video from the archive and backup your recorded file with audio.

Unparalleled surveillance functions where nothing slips through your watch

The network surveillance camera¡s motion detection function sends out the alarm when any
movement of any object occurring on the scene is detected, which makes it ideal for home and
after-hour facility security. 16 preset positions can be programmed and the auto-cruise function will
make the tour accordingly as if you were taking the patrol rounds in person.

You can also program the cameras to take snapshots or record video when the alarm is triggered by
the event. These snapshots can be transmitted via FTP or email. Event recording is done by a client
PC on the network as the camera sends snapshot in JPEG format as part of the responses to the
triggered event.

Optional centralized management software for large scale surveillance services

The software suite performs as a central control station on a client PC that controls, manages, and
monitors up to 9 network surveillance camera server units over the network at the same time. You can
talk to your surveillance camera just by a click on the managed camera to start 2-way audio
conversation. The flexible and diversified SMC offer you handy surveillance solution on Windows
platform.

11

S

Configure the Network Camera

tart

Leadtek Network Surveillance Camera can be used on the most standard/popular
operation system and internet browsers. We recommend that Microsoft Internet
Explorer on windows and Mozilla Firefox on other operating system , such as
Mac/Linux .

ActiveX Viewer

1. Launch the Internet Explorer and click ¡Tools¡ and select ¡Internet Options¡
option from the drop-down menu.

2. Click the ¡Security¡ tab from ¡Internet Options¡ .

3. Click ¡Custom Level¡ button to open the ¡Security Setting¡ .

4. Tick ¡Prompt¡ from the options titled with ¡Download signed ActiveX
controls¡ and ¡Download unsigned ActiveX controls¡ .

5. Tick ¡Enable¡ from the options titled with ¡Initialize and script ActiveX

controls not marked as safe¡, ¡Run ActiveX controls and plug-ins¡ and
¡Script ActiveX controls marked safe for scripting¡ .

6. Click ¡OK¡ to accept the modification.

7. You will see the warning message prompts out for your confirmation. Just click
¡Yes¡ to apply the modified security settings

Configure the Network Camera

The simplest way to locate a Leadtek Surveillance Camera in network is to use the
Leadtek utility program. It can scan the local network for all Leadtek cameras and helps
users for configuring the network. If you are not going to use DHCP server to
automatically assign the cameras unique IP addresses, you will need to manually
assign the camera with static IP address using the camera utility program.

12

Configure the Network Camera

Method I. The Utility Program ¡ IPCam Discoverer

IPCAM Discoverer is an application that can help on detecting the network cameras
and then you can use PC/Notebook to connect to the cameras on network .

1. Insert the packing CD into the CD-ROM drive from your PC.

2. Install the ¡IPCam Utility Setup.exe¡ and execute it.

3. The ¡IPCam Discoverer¡ window displays and just input the ¡MAC ID¡ from the
label at bottom side. Click the ¡Scan¡ button to start searching cameras.

4. Modify the related fields while the information displays.

5. Click ¡Apply¡ to confirm the modification and re-start the Camera.

13

Configure the Network Camera

Method II. Internet Explorer Address Bar

Another way to connect the network camera is to visit with static IP address. Login the
network camera by directly entering the IP address at the IE Address Bar.

1. Manually assign the last digit (192.168.0.x , 0<x<255 & x is not equal to 100) of
your PC IP address field. Restore the network camera to set the default IP
address as 192.168.0.100.

2. Start up the internet Explorer, and enter the IP address of the Network Camera at
the address, then press ¡Enter¡ to open the system login page.

3. The camera system login page displays.

4. Enter the ¡admin¡ for both user name and password fields.

5. Video will display after the ActiveX controls downloaded and installed completed.

6. Video is displayed in Web browser as below.

Notes: When the first time login Network Camera , please set the browser to allow

ActiveX controls and Windows Firewall security alert message. You may be
requested to install ActiveX controls.