amor H1is a personal and portable health device that allows users to
measure and record heart rate and activity value, giving users more
efficient feedback and record parameters displayed in Mobile APP. The
input of heart rate signal is obtained through adhesive electrode patches,
Activity data is record daily movement via clip at the waist.
amor H1 has time display, measuring heartbeat (HR), activity levels,
calories and exercise time and other functions, can be quantified by the APP
via sync data.
2.Warnings and precautions
Before using amor H1, please read below information first.
Warning
Do NOT use amor H1with MRI (magnetic resonance imaging)
environment.
Do NOT use amor H1 with a defibrillator, an electro-cautery, cardiac
pacemakers or other stimulators together.
To prevent possible explosion hazard. Do not use amor H1by in the
presence of flammable anesthetics.
Follow local governing ordinances and recycling instructions regarding
disposal or recycling of the device and components.
The result is for self-feedback purpose, not as result for medical
diagnosis, do not explain or judgment by yourself.
Caution
It’s necessary to read this user’s manual carefully before using this
product.
Please handle amor H1 with care. Hitting or dropping the device may
stop it from working. If there is any damage resulting from abnormal
use, please contact service personnel.
amor H1 is Followed safety requirements for local country electrical
1
systems.
Portable and mobile wireless communications device (RF, radio
frequency) maybe affect the amor H1.
The amor H1 Life of one year. To ensure the life of the machine, please
*: Sports Electrodes are for Single Use Purpose only.
4
5.1 Appearance
5.Operation
OLED Display
Long push the Button :On/Off
Short push the button: change
Interface
Fig.1:Top view
Fig.2:Side View
2.5mm hole (for connecting
HR cable or charging cable)
5
Fig.3:I/O Interface
5.2 Device screen instructions
Buzzer hole: Notice alert
Press the device, there will be 1)Time;2)Achievement rate;3)Steps;4)
Calories;5)Heart Rate;6) Exercise Time. From 1) to 6) is cycle display, But
stay ten seconds on each picture off the screen, shown in Figure 4.
1)
4)
5) 6)
2) 3)
Fig. 4: amor H1 main function Flow
5.3Operation
From Fig.1 to Fig. 3, Turn on is long press the button, Main screen will
6
appear, the device signals the next hole left there, this input wire or charging
cable to ECG use. Before use, the first patch fixed on the chest, connect the
signal line deduction (about color and text segments).
clip fastened at the waist and connected to cable, you can start using.
Finally, the product
Signal
wire and electrode patches affixed to the suggested location, shown in
Figure 5.
Fig. 5: The suggestion position of electrodes
The right for the R white, left for L Black. During the measurements,
the heart rate will appear on the screen, the measurement data will be
automatically saved parameters (every 10 seconds to save).
Activity levels
and other parameters will be presented on the screen. After data
synchronization, and full information can present on the App.
7
Fig. 6: amor H1use position and related picture
When the end of the exercise, or do not use heart rate function, unplug
the wire thread first, and then removed the electrodes from the body.
After
removing the Heart Rate Cable, the device can still record activity and other
applications. When the device is at low battery condition(battery symbol one
grid), suggest to charging. There will be a percentage of the charging battery
while charging. When the percentage charged to 100%, the device screen
turns off to save power.
When users unplug the charging cable or press the
button, the device will turn on.
6.App Installation and brief instructions
6.1 Install App
Download amor Runner App via QR code or through the official
website,
and then, you can click Next to proceed with the installation steps。Then the
installation progress reaches 100%, it means that the program has been
Software installation will automatically display the main screen,
installed. Program shortcuts displayed on the phone's desktop.
8
6.2 App Introduction
Amor Runner App can be downloaded from the product
web(health.leadtek.com)or from Google Play Store,App including below
items:
1.Login
2.Data overall view
3.Sync
4. Data Display
5.Autonomic nervous system measurement
6.Setting
7.Share
6.3 Maintenance
1. When the low-voltage display symbols, please charge Immediately.
2. When measuring signal is weak, the proposed replacement electrodes.
3. Clean method of surface of the instrument is used the dry naturally or use a
clean, dry cloth.
6.4 Label
Manufacturer: Leadtek Research Inc.
Address: No. 4, Lane 5, Sec 2, Lane 327, 235 District, New Taipei City
9
6.5 Issues table and Solve Handling
Table 2 Issues and Solve
QuestionReasonsHow to Solve
Storage space is fullMemory Space is fullUse the App to transmit the data
and clean the space
Can not open device
Can not measure the
activity values
Abnormal heart rate
value
Time is not correct
1、 Insufficient battery power
or no power
2、Device is damaged
G-senor is abnormal Please contact your local
Signal interference
1、Not sync with App
2、To long time to not use Device
1、Pls charge the battery
2、Please contact your local
customer service center
customer service center
1、Follow the operation flow
2、Replace the cable
Please sync with App
7.Application
7.1 Record personal activity status
Understand the self-condition to assist biofeedback by recording heart
rate and activity.
7.2 Effective exercise tool
Access to relevant information about user activities, such as: sports fat
burning, maximum heart rate, prompt, and effective exercise as a basis for
reference.
10
8.Technical Support and Warranty
8.1Technical Support
If you can not resolve your problem, please contact your dealer.You
can also contact us through the following technical support staff, information
is:
1.TEL:+886 (02)82265800#810
2.ADDRESS:18F, Chien-Yi Rd., Chung Ho Dist., Ne
23511
8.2Warranty Policy
Leadtek Research Inc. provides one year warranty, starting from the
purchasing date, to the original purchaser for repairing any product failure
due to fabrication error or defective parts. Within the limited range of the
warranty, defective products shall be fixed or replaced by Leadtek Research,
Inc. This warranty is not transferable. Damage due to negligence, accident,
abuse, misapplication, modification, mailing to the seller, or repairs not
made by Leadtek Research Inc., is not covered by the warranty. Within the
coverage of the warranty, the delivery fee for mailing to the retail seller or
the direct store is not covered within the scope of the warranty.
Reproduction or reprinting of part or all of the contents of this manual
by any means without written authorization from Leadtek Research, Inc. is
prohibited.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
11
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Leadtek Research Inc.
18 F, No. 166, Chien-Yi Rd., Chung-Ho Dist., New Taipei City 23511,
Taiwan, R. O. C.
Tel:+886 (02)82265800 Web:www.leadtek.com.tw
Product Web: QR Code
Rev.V.1.01 2014/5
12
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.