LEADER PREMIUMS AE0127 User Manual

Specifications:

Power rating:3W

Frequency Response：20HZ-20KHZ

THD ： ＜1%

S/N ：＞80DB

Speaker Parameter ： 4Ω/ 3W

Battery :3.7V/200MAH

Product Size :82*60*43mm

Micro USB socket

ON/OFF button

How to use:

1: On/Off

Switch to ON position, the indicator will flash red and blue light. To Turn Off, switch the

button to Off position.

2:Connecting to Bluetooth

Search for bluetooth name “ME20725” and click to pair the speaker. A blue light will

indicate the device is connected. A paired device will always match again the next time

the speaker is in use.

3. Answering Calls

To answer an incoming call, press Play/Pause button.

FCC Warning Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.