LEADER PREMIUMS AE0068 User Manual

1：ON/OFF button 2：Charging LED indicator 3: Micro USB socket 4: Speaker

Charging the battery:

1: insert the charging cable into the Micro USB input port & the LED indicator will turn on to

indicate that the device is charging.

2: After charging completed, the LED indicator will turn off. NOTE: In case of low battery, the

speaker volume will lower down & you will hear a warning tone from the speaker indicating low

battery.

Bluetooth pairing for music/phone call

1: a. turn on the speaker by pressing “ ” button for 3seconds. You will hear a voice from the

speaker along with the blue indicator flashing to indicate Power on.

2: Turn on your device and activate the Bluetooth function.

3: Search for Bluetooth name ”GUELPH” and click to pair the speaker .You will hear a voice

from speaker & the blue indicator light will turn on. Then, you just need to press” ” button to

answer the call or press for play/pause.

4.Turn off the speaker by pressing “ ”button for 4 seconds and you will hear a voice indicating

Power off.

Note: about the speakers using environment.

1: Bluetooth connection and transmission may be affected by the surrounding environment like

tress, metal and some other materials, for they can absorb or block the signal, so the distance of

data transmission may be influenced as well.

2: Fully charge your speaker while using for the first time. Please (when the speaker battery gets

lowered, the sound will be not as good as the sound in normal case.)

3: Please do not expose the speaker into the high temperature environment.

Specifications:

Power rating 3W

Frequency Response 20Hz-20kHz
THD ＜1%
S/N ＞80dB
Speaker Parameter 4Ω 3W diameter 36mm

Battery 3.7V/200mAh

Bluetooth Version Bluetooth V4.2

Product Size 60*60*73mm

Product Weight 90g

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.
‐Consult the dealer or an experienced radio/TV technician for help.

Made in China