LEADER PREMIUMS AB0196 User Manual

Glimpse

Photo Frame with

Wireless Charging Pad

Instruction Manual

AB0196

Features:

Photo Frame (4" * 6")
Wireless Charging Pad Surface

1.

LED Indicator

2.

Micro-USB Input Port

3.

What’s included:

4.

1 x Wireless Charging Photo Frame
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual

Input power: 5V/1.5A

•
Wireless Charging Output: 5V/1A

•

INSTRUCTIONS:

1.

Charging Mobile Devices:

•

Connect the provided charging cable to a
power source and to the micro USB port on
the photo frame(4).

•

Once connected, place wireless charging
supported mobile device on the charging
surface/suction pad, LED will glow white
when device is charging.

•

Phone will begin to charge automatically,
Wireless Charging LED(3) will turn off
when the device is fully charged.

**

Note: When wireless charging, if the LED

a wireless charging device or there is an
object between the device and charging
surface interfering with the charging.

SAFETY PRECAUTIONS:

WARNING-When using this product, basic

•
precautions should always be followed:
Read all the instructions before use.

1.
Never store or use this product in

2.
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The

3.
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.

4.

Do not expose the device to moisture.
Do not use the device in excess of its

5.
output rating. Overload outputs above the

Do not use the device if damaged or

6.

Do not disassemble the device. For

7.

professional. Incorrect reassembly may

8.

To ensure product safety, ensure that

identical replacement parts.

9.

Attachments on the back of your phone
can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove attachments from the
phone before charging on this device.

FCC Statement:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful

(1)

interference, and
This device must accept any interference

(2)

received, including interference that may
cause undesired operation.

Warning:

*

approved by the party responsible for
compliance could void the user’s authority

to operate the equipment

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1) this device may not cause harmful interference,
and (2) this
device must accept any interference received, including

interference that may cause undesired operation.

FCC Warning Statement
Changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.

.

MADE IN CHINA