LV 58SER20
DVI-I OUTPUT unit
Instruction Manual
LEADER ELECTRONICS CORP.
Contents
1 SPECIFICATIONS .................................................................................................... 1-1
1.1 Description............................................................................................................................. 1-1
1.2 Features ................................................................................................................................1
1.3 Specifications.........................................................................................................................1-1
1.3.1 DVI-I Connector.............................................................................................................. 1-1
1.3.2 General Specifications.................................................................................................... 1-1
2 PANEL DESCRIPTION ............................................................................................. 2-1
3 PROCEDURE ........................................................................................................... 3-1
-1
1 SPECIFICATIONS
1.1 Description
The LV 58SER20 is a dedicated output unit for the Leader LV 5800 (MULTI MONITOR) and LV
7800 (MULTI RASTERIZER). By installing it, you can output the LCD panel display to an
external monitor.
1.2 Features
The LV 58SER20 is equipped with a DVI-I connector, which can be used to output the LV
5800/7800 display to an external monitor.
The DVI-I connector provides both digital and analog outputs allowing the signal to be used on
a wide variety of XGA-compatible monitors.
1.3 Specifications
1.3.1 DVI-I Connector
Signal Format Single Link T.M.D.S
Analog RGB
Display Format XGA (Effective area 1024 × 768 dots)
DDC Function Not supported
HOT PLUG Detection Function Not supported
Output Connector DVI-I 1 system
1.3.2 General Specifications
Environmental Conditions Same as the LV 5800/7800
Power Requirements Supplied from the LV 5800/7800 5 W max.
Weight 0.2 kg
Supplied Accessories Instruction manual..............1
1-1
2 PANEL DESCRIPTION
Figure 2-1 illustrates the rear panel of the LV 58SER20.
Figure 2-1 DVI-I connector
An output connector that supports both TMDS serial digital output and analog RGB output.
The LV 5800/7800 display is output from the DVI-I connector. Connect the output to external
monitor or other similar devices.
2-1
3 PROCEDURE
Connect the DVI-I connector to an XGA-compatible external monitor.
The LV 5800/7800 display is shown on the external monitor.
3-1
Following information is for Chinese RoHS only
所含有毒有害物质信息
部件号码: LV 58SER20
此标志适用于在中国销售的电子信息产品,依据 2006 年 2 月 28 日公布的
《电子信息产品污染控制管理办法》以及 SJ/T11364-2006《电子信息产品污染
控制标识
用期限，只要遵守与本产品有关的安全和使用上的注意事项，从制造日算起在数
字所表示的年限内，产品不会产生环境污染和对人体、财产的影响。
产品适当使用后报废的方法请遵从电子信息产品的回收、再利用相关法令。
详细请咨询各级政府主管部门。
部件名称
Parts 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
实装基板×○○○○○
主体部×○○○○○
附件○○○○○○
包装材○○○○○○
备注）
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 规定的限量要求以下。
×：表示该有毒有害物质或元素至少在该部件的某一均质材料中的含量超出SJ/T11363-2006
标准规定的限量要求。
有毒有害物质或元素 Hazardous Substances in each Part
要求》，表示该产品在使用完结后可再利用。数字表示的是环境保护使
产品中有毒有害物质或元素的名称及含量
(Pb) (Hg) (Cd) (Cr(Ⅵ)) (PBB) (PBDE)
Ver.4
Nov. 16, 2009 09110.001K TS 3
Loading...