LEADER Video Test Instruments Catalog 2008-2009

Page 1

Page 2

COMPANY PROFILE

LEADER Since LEADER

ELECTRONICS CORP. was established in 1954, has focused its attention on international markets. LEADER established local corporations in U.S.A. in 1969 and Hong Kong in 1980. Many other positive measures have also been taken before other companies. In July 1995, LEADER's own service center was set up in Shanghai for better service/maintenance in China. In 2003, Regional Offices were established in Beijing and Dongguan to support LEADER products, which are becoming increasing popular in view of the growing Japanese presence in China. In 2005, The Technical Service Center was established in Beijing. LEADER ELECTRONICS is keeping abreast of the times with the establishment of LEADER ELECTRONICS EUROPEAN OFFICE in The Netherlands in 2006. LEADER ELECTRONICS now has a global network linking its agents in 62 countries/areas.

Audit and Registration of ISO9001 and ISO14001, the internal standard for Quality and Environmental Management Systems

The electronic measuring instrument, the mother tool of electronics, consistently requires the highest technology and quality. The history of LEADER ELECTRONICS CORP. is indeed the history of the pursuit of higher technology and quality. In December 1994, we received an audit and successfully registered ISO9001, the international standard for quality management systems, and furthermore, as our basic policy of product development considering the environment, we received an audit and successfully registered ISO14001 in April 2007, that is the international standard for an environmental management system. It gives us great satisfaction to offer products manufactured with outstanding technologies and quality, and moreover, to contribute to society through activities that take into consideration the environment.

Company name

LEADER ELECTRONICS CORP.

Headquarters

2-6-33 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-8505, Japan Phone: 81-45-541-2123 Fax: 81-45-541-2823

Headquaters annex

2-6-21 Tsunashima-Higashi Kohoku-ku, Yokohama 223-0052, Japan

Factory 1

6-11-28 Tsunashima-Higashi Kohoku-ku, Yokohama 223-0052, Japan

Factory 2

5-10-35 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-0052, Japan

Headquarters

Headquaters annex

Factory 1

Factory 2

Page 3

Fuji Television Wangan Studio in Tokyo

ABC Studio in New York

Page 4

Selection

Guide

Waveform Monitor

※1 LV7720(SDonly) ※2 EyePattern(option) ※3 Option73A

Signal Generator/SDI System Margin Checker

Page 5

Video

Test Instruments

Dean Krueger, DP & DIT

LV 5750 in use on the set.

Page 6

MULTI SDI MONITOR

LV 5380

The LV 5380 is a multi-SDI monitor equipped with a precision video signal waveform and vectorscope display via a highfidelity TFT LCD that produces high-quality picture displays. It also offers an embedded audio signal display featuring Lissajous and level-meter configurations. Additional features include simultaneous display of two SDI signals, screen capture to USB memory, and on-picture gamut error monitoring. All these features are integrated into a thin, light instrument that allows it to be used in any video production or monitoring application.

FEATURES

•

High-Quality TFT LCD

Employs an XGA TFT LCD (1,024x768) that produces highquality picture displays.

• Extensive Video Signal Displays

The waveform monitor display has gain adjustment, sweep, and cursor measurement features along with RGB and pseudo-composite information. The LV 5380 also provides vectorscope and embedded audio Lissajous and Levelmeter displays.

• Multi-Functional Picture Display

The picture display has various adjustment features such as color temperature selection, brightness, contrast, gain, and bias. Other features include monochrome, chroma up, onimage gamut error, and safety marker displays.

•

Multi-Screen Display and 2-Channel Simultaneous Display

1)You can switch to multi-screen which simultaneously shows video signal waveforms and pictures.

2)You can switch to multi-screen which simultaneously shows video signal waveforms, picture, vectorscope, and audio levels.

3)You can display two SDI signals simultaneously.

• Dual link input *1

• Status Display

The LV 5380 can display SDI signal's data dump and error logs as well as the phase difference between the external sync signal and SDI signal.

•Display Mode Switch Keys

For quick operation, the LV 5380 provides dedicated keys for switching between different display modes such as video waveform, vectorscope, and picture displays. In addition, all keys can be back-lit.

• Stereo Headphone Output

Delivers SDI signal's embedded audio signals in stereo through the headphone output jacks.

• External Sync Signal Input

Accepts tri-level sync signals or NTSC/PAL black burst signals.

• Presets

Stores up to 30 front panel presets.

• Last Memory

Equipped with a feature that stores panel settings to memory.

• 75-mm VESA Mounting

Provides 75-mm VESA mounting holes on the rear panel that allows the LV 5380 to be mounted on an arm or stand. Tripod mounting facilities also provided.

• External Remote Connector (Factory Option)

An external remote connector can be installed as a factory option. In addition, one of the connectors can be modified so that a tally indicator can be displayed on the screen.

■

Battery Mount (Factory Option)*2

A battery adapter can be installed on the rear panel as a factory option.

• OP73 : BATTERY MOUNT IDX (V-Mount)

• OP74 : BATTERY MOUNT ANTON (AntonBauer)

■

OP70: Cinelite II (Cinelite+Cinezone) (Option)

Leader's CINELITE and CINEZONE features are added as a single option in this instrument. For details on CINELITE & CINEZONE, please see page #49.

*1 To be supported in the future *2 If you install the battery mount, you cannot use the 75-mm VESA mounting holes.

Compact Multi-SDI Monitor

8.4 Inches

The design is subject to change.

4U size

Ⅱ

option

Page 7

LV 5380 SPECIFICATIONS

Video Formats and Corresponding Standards

Audio Display

Compliant Standard Quantization Synchronization Channel Selection

Input/Output Connectors

SDI Input

Input Connectors Input Impedance Input Return Loss Maximum Input Voltage

SDI Output

Output Connector

Output Impedance Output Voltage Maximum Return Loss

External Reference Input

Input Signal Input Connectors Input Impedance

Headphone Output

Output Signal

Sampling Frequency Output Connector Impedance

LCD

LCD Type Backlight Brightness Auto Shutoff

Screen Capture

Capture

Waveform Comparison

Data Output

Data Input

Presets

Display Mode Presets Number of Presets

Waveform Display

Waveform Operation

Display Mode

Overlay Display

Parade Display Blanking Period RGB Conversion Pseudo-Composite Display

Channel Assignments

Line Select

Vertical Axis

Gain Variable Gain Amplitude Accuracy Frequency Characteristics HDTV

Y Signal

B, CR Signals

Low-Pass Attenuation Frequency Characteristics SDTV

Y Signal

CB, CR Signals

Low-Pass Attenuation

Horizontal Axis

Line Display Field Display

Cursor Measurement

Types

Amplitude Measurement Time Measurement Frequency Display

Scale

Type Color Thumbnail Display

Vectorscope Display

Gain Variable Gain Amplitude Accuracy Scale

Type IQ Axis Color

Pseudo-Composite Display

Thumbnail Display

5 Bar Display

Bar Display Channel Assignments Scale Error Level

SMPTE 299M (HD-SDI), SMPTE 272M (SD-SDI) 20 bits Must be synchronized to all video clocks Two groups (eight channels in the same SDI channel) selectable

Two BNC connectors 75 Ω ≥ 15 dB 5 MHz to the serial clock frequency ±2 V (DC + ACpeak)

One BNC connector Reclocks and transmits the selected SDI input signal 75 Ω 800 mVp-p ± 10 % ≥ 15 dB 5 MHz to the serial clock frequency

Tri-level sync or NTSC/PAL black burst One pair of BNC connectors 15 kΩ passive loop-through

Extracts and transmits the embedded audio signal (when synchronized to the video signal) Supports 48 kHz One stereo miniature jack 16 Ω

8.4-inch color XGA TFT. Effective area 1,024 x 768 dots 32 adjustable levels Time to turn off the LCD can be set.

Captures the screen to an image file Superimposes the input signal over an image from memory. Screen captures can be saved as bitmap files to USB memory or to a PC over the Ethernet. Data saved to USB memory can be loaded and displayed on the LV 5380.

Only stores settings specific to each display mode 30 total. Display Mode Presets:Five presets for each display mode.

Overlays component signals Displays component signals side by side H and V blanking periods can be masked Converts Y, CB, CRsignals into RGB and displays the result Digitally converts component signals into composite signals and displays the result The G, B, R order or R, G, B order selectable for RGB conversion display Displays the selected line

x1 or x5 selectable x0.2 to x2.0

≤ ±0.5 %

≤ ±0.5 % for 1 to 30 MHz ≤ ±0.5 % for 0.5 to 15 MHz ≥ 20 dB (at 20 MHz)

≤ ±0.5 % for 1 to 5.75 MHz ≤ ±0.5 % for 0.5 to 2.75 MHz ≥ 20 dB (at 3.8 MHz)

x1, x10, x20, ACTIVE, or BLANK selectable x1, x20, or x40 selectable

Two horizontal cursors (REF and DELTA) Two vertical cursors (REF and DELTA) Measures in % or V Measures in usec or msec Displays the frequency by assuming the interval between the cursors to be one period

% scale or V scale selectable Selectable from seven colors Can display thumbnails of picture displays and audio level meters

x1, x5, or IQ-MAG selectable x0.2 to x2.0 ≤ ±0.5 %

75 % or 100 % selectable Show or hide selectable Selectable from seven colors Digitally converts component signals into composite signals and displays the result Can display thumbnails of picture displays and audio level meters

Displays the peak levels of Y, R, G, B, and composite RGB or GBR selectable mV or % selectable Based on gamut error level and composite gamut error level settings, user settable.

Picture Display

Color Temperature Quality Adjustment Display Size Color

Frame Rate

Aspect Marker Display Aspect Marker Format Safety Marker Size Line Select Gamut Error Display Thumbnail Display

Embedded Audio Display

Lissajous Display

Display Channels Display Mode

Level Meter Display

Display Channels Meter

Channels

Group Selection

Audio Information Detection Sampling Frequency

Status Display

Event Log Data Dump Display Data Output

Phase Difference Display

Display

Display Range

Vertical

Horizontal

Error Count

Count Period Video Errors

CRC Error EDH Error

Gamut Error

Detection Range Upper Limit

Lower Limit

Composite Gamut Error

Detection Range Upper Limit

Lower Limit

Audio Errors

CRC Error BCH Errors

Time Display

Current Time Display Elapsed Time Time Code

Other Display Features

ID Display Tally Indicator

Front Panel

Key LEDs Last Memory

Environmental Conditions

Operating Temperature Operating Humidity Range Operating Environment Overvoltage Category

Pollution Degree Power Requirements Dimensions

Weight Accessory

Option Sold Separately

6500K or 9300K selectable Brightness, contrast, gain, bias, aperture Fit, full frame, real, and 4:3 full screen R, G, or B can be turned off separately. Variable chroma gain and monochrome available. Displays by converting the frame rate using the internal sync signal 4:3, 13:9, 14:9, or 16:9 selectable Line, shadow (three types), black ARIB TR-B4, SMPTE RP-218, or user-defined selectable Displays a mark on the selected line Displays gamut error locations over the picture Displays thumbnails of audio level meters

2ch (single) or 8ch (multi) selectable X-Y or L-R selectable

2ch or 8ch display selectable 60 dB peak level, 90 dB peak level, or average selectable. (Peak level meters include setable peak hold indication.)

Select any two groups within the same SDI channel from groups 1, 2, 3, and 4 Detects the presence of each audio channel 48 kHz (must be synchronized with the video signal)

Stores up to 1,000 events Dumps data by serial data sequence or by channel Can be saved in text format to USB memory or to a PC

Displays numerically and graphically the phase difference between an SDI signal and the external sync signal

±1 field (for interlace) ±1/2 frame (for progressive) ±1 line

Counts up to 999,999 video, audio, and gamut errors separately Counts all errors that occur in one field as one error

Detects transmission errors of HD-SDI signals Detects transmission errors of SD-SDI signals

Detects gamut errors

90.0 to 109.4 %

-7.2 to +6.1 % (0.1 % steps) Monitors level errors when component signals are converted to composite signals

90.0 to 135.0 %

-40 to -20 % (0.1 % steps)

Detects CRC errors in channel status bits Detects transmission errors of HD-SDI audio packets

Time display based on the internal clock Time elapsed since the error count was cleared LTC or VITC selectable (complies with SMPTE RP-188)

ID can be assigned to each input channel. One of the remote connectors can be modified so that tally indication can be shown on the screen (to be supported in the future).

All keys illuminate dimly. (The selected key illuminates brightly.) Backs up panel settings to memory

0 to 40 ºC ≤ 85 % RH (without condensation) Indoors I 2

10 to 18 VDC, 30 W max. 215 (W) x176 (H) x 85 (D) mm (excluding projections)

8 1/2(W) x 6 15/16(H) x 3 3/8(D) in. (excluding projections)

2.0 kg, 4.5 lbs

Instruction manual.................................................................1

Ferrite Core ...........................................................................1

AC adapter LP 1960 Rack mount LR 2751 I Blank Panel LC 2129

Format Quantization Scanning Frame (Field) Frequency

Corresponding Standard

Y, C

B, CR 4:2:2 10bit 1080i 60/59.94/50 SMPTE 274M

1080p 30/29.97/25/24/23.98 SMPTE 292M 1080PsF 30/29.97/25/24/23.98

SMPTE RP211 SMPTE 292M

720p

60/59.94/50/ SMPTE 296M 30/29.97/25/24/23.98 SMPTE 292M

525i 59.94

SMPTE 259M

625i 50

• The video signal waveform display and vectorscope display may be delayed by up to 1 frame with respect to the picture display.

•V sweep cannot be displayed when the video signal waveform displays for two simultaneous inputs are shown.

• Phase difference accurary between external reference and internal signal is ±1 clock cycle.

Cinelite Cinezone

      







■Cinelite II (Option)

Page 8

LV 5380 DISPLAY

Picture Display

Versatile Picture Display

Picture adjustment options include color temperature (6500K/9300K), brightness, contrast, gain, bias, and aperture. You can switch the R, G, and B signals on and off.

Picture adjustment menu Picture and waveform time axis correspondence

Multi-Screen Display Waveforms Y RGB Display Audio Display

Phase Difference Display

Data Dump Status Aperture

Composite Display 5 Bar/Picture/Gamut Gamut Error Display

Video Waveform Color Selection Various Markers Line Selection

Whitedisplay Greendisplay

Marker display menu

Changes the color of gamut error areas in the picture display.

OFF

Page 9

■LV 5380 REAR PANEL

■ExternalDimensions

■RackMounting

215 mm.

8.46 in.

85 mm.

3.35 in.

75 mm.

2.96 in.

47.5 mm.

1.87 in.

mm.17mm.

mm.

0.79 in.

1.89 in.

0.67 in.

176 mm.

6.93 in.

155.2 mm.

6.11 in.

75 mm.

2.95 in.

34.2 mm.

1.35 in.

10.4 mm.

0.41 in.

10.4 mm.

0.41 in.

FIT Display Size (with audio levels) REAL Display Size

(pixel to pixel correlation)

MONOCHROME Display

■ACAdapterLP1960(soldseparately)

LV 5380 dual mount example

LR 2751 I Rack Mount (sold separately; tiltable) LC 2129 Blank Panel (sold separately)

Page 10

MULTI SDI MONITOR

LV 5330

The LV 5330 is a compact and lightweight multi-SDI test monitor specifically designed for oncamera and portable applications. Picture, waveform, vector, audio and status screens can be displayed individually or in multi-screen representations. The instrument is also equipped with on-picture measurement functions, Cinelite and Cinezone, and helps facilitate measurements that are easily understood by both technical and operations personnel. High-accuracy measurement and monitoring facilities also include settable error level monitoring and alarms as well as extensive data analysis. A screen capture function facilitates communication between production and post production personnel and aids in project documentation.

FEATURES

•

Two Serial Digital Inputs

Two SDI input connectors (channels A and B) support HD-SDI and SD-SDI signals. The selected SDI input is passed through an SDI output connector to facilitate switched monitor output operation.

• Display

A built-in 6.5-inch XGA TFT LCD (1,024x768) provides brilliant and clear representations of waveforms, vectors, pictures, audio level meters, status, etc. The multi-screen feature allows these displays to be shown simultaneously in tiled windows.

• Picture display

Brightness, contrast, and saturation is adjustable and aspect ratio, safe action and safe title markers can be displayed. The edge enhancement feature provides visual assistance with focus.

• Cinelite II (Cinelite and Cinezone)

The Cinelite on-picture measurement feature displays the luminance of any three user definable points and provides luminance measurements in %, RGB levels (or %) as well as in f-stops. The Cinezone feature uses false-colors to represent luminance values on the display enabling quick confirmation of the luminance distribution levels on the display.

• Waveform Monitoring

Parade, overlay, Y C

B CR, RGB, and pseudo-composite displays

are available.

• Vectorscope

Vectorscope display is available and accommodates both 75 % and 100 % saturation levels; pseudo-composite vectorscope display is also available.

•5 Bar Display

The 5 Bar display enables simultaneous monitoring of component and composite gamut.

• Line Selector

Selects any line of the video signal to be displayed and provides waveform, vector and 5-bar representations of the selected line. A line marker on the picture facilitates visual selection of the appropriate line.

• Audio Level Meter

Up to 8 channels of embedded audio signals can be displayed using audio bar level meters.

*The SD-SDI audio quantization precision is up to 20 bits.

• Viewfinder

The camera's composite video output (in NTSC or PAL) can be shown on the picture display. The edge enhancement feature assists you in focusing the camera.

• Screen Capture

The displayed screen can be captured and saved to internal memory or USB memory.

• Extensive Analysis Features

•

Various types of error detection

•

SDI signal event log

•

Digital data dump

• Flexible Control

•

Instrument can be remote controlled from a PC over an

Ethernet network.

•

Internal memory holds up to 30 presets allowing quick access to your favorite instrument setups. Personalize your LV 5330 by loading your own custom presets via USB thumb-drive.

• External Synchronization

Accepts tri-level sync or NTSC/PAL black burst signals.

• Stereo Headphone Output

Extracts embedded audio signals and sends 2 user selectable audio channels to the headphone jack.

• Panel LED Illumination

You can illuminate all of the panel keys; a useful feature when working in a dark environment.

• Power Supply

XLR DC input connector is provided; accepts 12Vdc- 18Vdc. A V-mount battery adapter is also available as a factory option.

• Tripod Mounting

A Screw(1/4.in) hole attaching a camera tripod is provided on the bottom panel of the LV 5330.

• Battery Mount (Factory Option)

A battery adapter can be installed on the rear panel as a factory option.

•

BATTERY MOUNT IDX (V-MOUNT)*1

•

BATTERY MOUNT ANTON (AntonBauer)

*1 To be supported in the future

Compact, Slim & Lightweight Multi-SDI Test Monitor

6.5 Inches

1.3 kg

The design is subject to change.

Ⅱ

215 mm

63 mm

128 mm

Page 11

LV 5330 SPECIFICATIONS

Video Formats and Corresponding Standards

Other Standards

Ancillary Data Standard Embedded Audio Standard

Format Setting

Format Setting Sampling Frequency

External Synchronization

Input/Output Connectors

SDI Input

Input Connector

External Reference Input

Input Signal Input Connector

SDI Output

Output Connector

Output Voltage

Headphone Output

Output Signal Sampling Frequency

Output Connector

USB Memory

Function

Remote Control

Function Connector

Ethernet

Function

Type:

Viewfinder Input

Function Input Signal Input Connector

Picture Display

HDTV Display SDTV Display Display Frame Rate

Marker Display

Adjustment:

Cinelite Display

f-STOP:

Measurement points Reference

%DISPLAY

Measurement points Measurement areas GAMMA

0.45

USER 1-3

USER A-E On Picture Level Indicator

Cinezone Display

Screen

UPPER

LOWER

Display Form

Display Size

1 Screen Display

2 Screen Display

SMPTE 291M SMPTE 299M (HD-SDI), SMPTE 272M (SD-SDI)

Auto or manual setting from the supported formats

74.25 MHz (HDTV), 74.25/1.001 MHz (HDTV),

13.5 MHz (SDTV) Auto setting from supported formats

Two BNC connectors (switching between A and B)

Tri-level sync or NTSC/PAL black burst One pair of BNC connectors (15 kΩ passive loop-through) *

Phase difference accurary between external reference

and internal signal is ±1 clock cycle.

One BNC connector (reclocks and transmits the selected SDI input signal) 800 mVp-p±10 % outputs (75

Ω

)

Extracts and outputs the embedded audio signal. Supports 48 kHz (must be synchronized to the video signal) One stereo miniature jack, 32

Ω

(16 to 600 Ω)

Stores screen captures, error logs, preset data, and data dumps, Also used for Firmware update.

Recalls presets, transmits errors, controls the tally indicator D-sub 15-pin female

Enables remote control from an external computer and data transmission 10BASE-T/100BASE-TX auto switching, one RJ-45 jack

Monitors composite video signals, picture only. NTSC/PAL VBS signal One BNC connector

Displays by sampling pixels Displays by interpolating pixels Color or black and white selectable Displays by converting the frame rate using the internal sync signal Center marker, aspect marker, safe title marker, safe action marker Brightness, contrast, chroma, aperture

Measures relative brightness in f-stops Three points specified using the cursor Uses an object with an 18 % reflectance as reference Displays luminance percentage (LEVEL%), RGB percentage (RGB%), and RGB numeric values Three points specified using the cursor 1x1, 3x3, 9x9

Reference gamma User-defined gamma Gamma downloaded from USB memory Switches the screen to black and white and displays the set luminance level in green

Maps colors based on luminance levels. Linear or step selectable. Can be set from -6.3 % to 109.4 %. Displays white when the level is above the set level. Can be set from -7.3 % to 108.4 %. Displays Black when the level is below the set level.

6.5-inch color XGA. Effective area 1024 x 768 dots Picture display, Cinelite display, Cinezone display, waveform display, vectorscope display, status display, viewfinder display Picture and waveform displays, waveform and vectorscope displays, waveform and picture displays, waveform and audio level displays, audio numeric and bar displays

4 Screen Display

Waveform Display

Waveform Operation

Display Modes Timing Display

EAV-SAV period G, B, R Conversion

Pseudo-Composite Display

Channel Assignments

Vertical Axis

Gain Variable Gain

Amplitude Accuracy Frequency Characteristics HDTV

Y Signal C

B, CR signals

Frequency Characteristics SDTV

Y Signal C

B, CR signals

Horizontal Axis

Line Magnification Field Magnification

Cursor Measurement

Horizontal Cursors Vertical Cursors Amplitude Measurement Time Measurement Frequency Display

Marker Display

75 % Marker

Vectorscope Display

Scale Gain Variable Gain

Amplitude Accuracy IQ Axis Pseudo-Composite Display

5 Bar Display

Bar Display

Embedded Audio Display

Display Channels Meter Group Selection Channel Mapping

Viewfinder

Display Size Adjustment

Status

Data Dump Display Event log Data output

Screen Capture

Waveform Comparison Presets Other Display Features

LCD

Backlight brightness Screen Display Panel LED Illumination

Environmental Conditions

Operating Temperature Operating Humidity Range Operating Environment Overvoltage Category Pollution Degree

Power Requirements Dimensions and Weight

Accessory Option Sold Separately

Audio level display or status display selectable in addition to waveform display, vectorscope display, and picture display

Overlay and parade Displays by calculating Y-C

B and Y-CR

Uses bowtie signals (authorized by Tektronix, Inc.) Show or hide selectable Converts Y, C

B, CR signals into G, B, R and displays

the result Digitally converts component signals into composite signals and displays the result The G, B, R order or R, G, B order selectable for G, B, R conversion display

x1, x5, or variable selectable x0.2 to x2.0 at the x1 setting, x1.0 to x10.0 at the x5 setting

≤ ±0.5 %

≤ ±0.5 % 1 to 30 MHz ≤ ±0.5 % 0.5 to 15 MHz

≤ ±0.5 % 1 to 5.75 MHz ≤ ±0.5 % 0.5 to 2.75 MHz

x1 or x10 selectable x1, x20, or x40 selectable

2 (REF and DELTA) 2 (REF and DELTA) Measures in % or V Measures in usec or msec Displays the frequency by assuming the interval between the cursors to be one period

Indicates the value corresponding to the peak chrominance signal of the 75 % color bar.

75 % or 100 % selectable x1, x5, IQ-MAG, or variable selectable x0.2 to x2.0 at the x1 setting, x1.0 to x10.0 at the x5 setting ≤ ±0.5 % Show or hide selectable Digitally converts component signals into composite signals and displays the result

Displays the peak levels of Y, R, G, B, and composite

8-channel simultaneous display 60 dB peak level or 90 dB peak level Select any two groups from groups 1, 2, 3, and 4 Mapping to L, R, SL(S), SR, C, LFE, RL, RR

Full-screen display Brightness, contrast, chroma, aperture

Dumps data by serial data sequence or by channel Stores up to 1,000 events To USB memory or over an Ethernet network

Captures the displayed screen Superimposes the input signal over an image from memory.

6.5-inch color LCD High or low selectable Format, color system, date, time Illuminates all keys

0 to 40 ºC ≤ 85 %RH (no condensation) Indoors, or outdoors with no rain I 2

12 VDC (10 to 18 V), 18 Wmax. 215 (W) x128 (H) x 63 (D) mm (excluding projections), 1.3 kg

8 1/2 (W) x 5 3/64 (H) x 2 31/64(D) in. 2.9 lbs

Instruction manual......................................................1

AC adapter LP 1960

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1080i/60 1080i/59.94 1080i/50 1080p/30 1080p/29.97 1080p/25 1080p/24 1080p/23.98 1080PsF/30 1080PsF/29.97 1080PsF/25 1080PsF/24 1080PsF/23.98 720p/60 720p/59.94 720p/50 720p/30 720p/29.97 720p/25 720p/24 720p/23.98 525i/59.94 625i/50

Format

SMPTE 274M, 292M

SMPTE RP211, 292M

SMPTE 296M, 292M

SMPTE 259M

Corresponding Standard

Cinelite Cinezone

■Cinelite II

Page 12

MULTI MONITOR

LV 5800

Your Desired combination of units allows a flexible waveform monitor

The LV 5800 is a new type of multi monitor that allows you freely configure various input and output units according to your application. You can construct a versatile system by combining dedicated input and output units. In particular, simultaneous display and error monitoring of multiple SDI inputs are possible, and four-waveform parade display on the waveform monitor is also supported.

FEATURES

•

Four Input Slots

Up to four input units can be inserted. Each input unit operates

independently.

•

Two Output Slots

Up to two output units can be inserted. Each output unit operates independently.

•

Display Function

Employs a color TFT LCD monitor with XGA resolution (1,024 x 768). The display function of each unit can be displayed on a full screen or 4 screen multi display. The 4 screen display allows arbitrary combination of signals of different input units to be displayed.

•

Capture Function

In addition to simply displaying the image data, this capture function allows you to superimpose the input signal

Unit List

and the captured data views,allows you to save the data to USB memory and to reload the data into the LV 5800 later, and allows you to view the captured data as bitmap data on a computer.

•

Ethernet Connector

Remote control through TELNET or FTP, error monitoring, and file transfer are possible by connecting a PC to the Ethernet connector on the rear panel.

•

Remote Connector

The remote connector on the rear panel allows recalling of presets, detection of errors, and switching of inputs.

•

Low Noise Cooling System

Equipped with a low noise fan. Fan speed controlled using a temperature sensor. If the fan stops due to a malfunction, an alarm can be displayed on the screen through the revolution sensor.

•

Headphone Socket

Sound can be monitored when the LV 58SER40A is installed.

■LV 5800 REAR PANEL

Please use exclusive cabinet for Model LV 5800 (photograph shows LR 2427B) The Panel design is subject to change. The cabinet is sold separately.

LV 58SER20/LV 58SER40A/LV 58SER02/LV 58SER01A x 2 for installation example

PATENTED:

Equivalent cable length measurement

Ⅱ

option

•

LV 58SER01A

SDI INPUT

•

LV 58SER02

EYE PATTERN UNIT

•

LV 58SER03

COMPOSITE VIDEO UNIT

•

LV 58SER04

MPEG DECODER

•

LV 58SER20

DVI-I OUTPUT UNIT

•

LV 58SER40A

DIGITAL AUDIO

AFD Ready

Page 13

LV 5800 SPECIFICATIONS

Slot

Number of Slots for Input Number of Slots for Output

LCD Display

LCD Screen Type Display Format Frame Frequency

Backlight Brightness Auto Shutoff

Display Screen

Screen Capture

Capture

Waveform Comparison Media Format

Data Output

Presets

Number of Presets Media Recall Method

Copy

External Reference Input

Input Signal Input Connector Input Impedance Input Return Loss Maximum Input Voltage

4 2

6.3-inch TFT color XGA Effective area 1024 x 768 dots

59.94 MHz (The input signal and the display clock signal have not been synchronized.) Selects HIGH or LOW Sets the time for the backlight to shutoff automatically. 1-screen display, 2-screen display, 4-screen display

Image capture by the still picture of the display screen Superimposes the input signal over an image from memory. Internal memory (RAM) or a USB memory TIF, DPX

Save displayed test screens or full-frame captures in various formats, including BMP, DPX, and TIFF. Save data to a PC via a USB memory or Ethernet network.

60 Internal memory (RAM) or a USB memory Through the front panel, remote connector, and Ethernet network (Switches 8 points and 60 points for recalling through the remote connector.) Copies presets collectively to the USB memory or from the USB memory to the LV 5800.

Tri-level sync signal or NTSC/PAL black burst BNC connector 1 system 2 connectors 15 kΩ Passive Loop-through ≥30 dB ±5 V (DC + peak AC)

External Control Connector

USB Connector

Specifications Function

Ethernet Connector

Corresponding Standard Input/Output Connector Function

Type

Remote Connector

Function Control Signal Control Connector

Headphone Output

PHONES connector Function

Environmental Conditions

Operating Temperature Operating Humidity Operating Environment Operating Altitude Overvoltage Category Pollution Degree Power Requirements

Dimensions and Weight

Accessories

USB2.0 Only a large capacity memory device is supported.

IEEE802.3 RJ-45 Remote control from an external computer and monitoring of errors, etc. 10BASE-T/100BASE-TX

Recalling of presets, monitoring of errors LV-TTL level (LOW active) 25-pin D-sub (female)

Miniature jack (stereo) Like LV 58SER40A (DIGITAL AUDIO), it is effective when the unit that has audio decoding function is inserted.

0 to 40 °C ≤ 85 % RH(without condensation) Indoor use Up to 2,000 m II 2 90 to 250 VAC 50 Hz/60 Hz, 150 Wmax.

215(W) x 133(H) x 449(D) mm 5 kg 8 1/2(W) x 5 1/4(H) x 17 11/16(D) in 11 lbs

Power cord .......................................................1

Cover/Inlet stopper...........................................1

Screws for rack mounting

(inch specification)...........................................2

Instruction manual............................................1

25-pin D-sub connector ...................................1

25-pin D-sub connector cover .........................1

EX, LV 58SER01A 2 sets are installedEX, LV 58SER01A 2, LV58SER02

1 sets are installed

EX, LV 58SER01A 2 sets are installed EX, LV 58SER01A/LV 58SER02 1 sets

each are installed

EX, LV 58SER01A 2 set are installed (4Y PARADE)

EX, LV 58SER01A 1 set is installed EX, LV 58SER01A 2 set are installed

EX, LV 58SER01A 2 set are installed

EX, LV 58SER01A 1 set is installed EX, LV 58SER01A 1 set is installed

EX, LV 58SER01A 1 set is installed EX, LV 58SER01A 1 set is installed EX, LV 58SER02 1, LV 58SER 01A

1 set is installed

EX, LV 58SER02 1, LV 58SER 01A 1 set is installed

EX, LV 58SER03 1 set is installed

OptionEX, LV 58SER04 1 set is installed EX, LV 58SER40A 1 set is installed EX, LV 58SER40A 1 set is installed

Multi

Wave form Vector

4 input Picture Waveform

Status Phase

V-ANC 5 Bar EyePattern/Jitter COMPOSITE

CinezoneMPEG Audio

Option

Cinelite

Page 14

LV 5800 Platform Options

This unit is an SDI input unit that installed in a LV 5800 input slot. The unit allows waveform display, picture display, and error detection of the SDI signal on the LV 5800. Combination with other optional units allows various displays such as the eye pattern display of the SDI signal (LV 58SER02) and the Lissajous and level displays of the embedded audio (LV 58SER40A). The SDI signal that is inputted to the ACH or the BCH can be outputted respectively from the ACH/BCH Reclockout output connector by interlocking with the input key of the front panel.

Video Formats and Corresponding Standards

Single Link System Video Signal Corresponding Formats and Corresponding Standards

Dual Link System Video Signal Corresponding Formats and Corresponding Standards

Ancillary data standard Embedded audio standard Format Setting

Input/Output Connector

SDI Input

Input Connector

Input Impedance Input Return Loss Maximum Input Voltage

External Sync Signal Input

Input Signal Input Connector

SDI Output

Output Connector

Output Impedance Output Voltage Output Return Loss

Waveform Display Function

Waveform Operation

Display Mode

Overlay display Parade display

Gain Adjustment Blanking Period YCBC

→

GBR conversion

Pseudo-Composite Display

Timing Display

Channel Assignment

Line Select Image Quality Adjustment

Vertical axis

Sensitivity

Gain Variable Gain Amplitude Accuracy Frequency Response HDTV

Y Signal

B, CR Signal

Low-pass Attenuation Frequency Response SDTV

Y Signal

B, CR Signal

Low-pass Attenuation

Horizontal Axis

Line Display

Display Format

SMPTE 291M HD-SDI: SMPTE 299M SD-SDI: SMPTE 272M Automatic setting

BNC connector 2 connectors For single link A ch / B ch 2 systems For dual link link A / link B 1 system 75 Ω 15 dB or more 5 MHz to serial clock frequency ±2 V (DC + peak AC )

Tri-level sync or NTSC/PAL black burst BNC connector 1 system 2 connectors

BNC connector 2 connectors Reclocks serially and outputs the input signal. For single link A ch / B ch 2 systems For dual link link A / link B 1 system 75 Ω 800 mVp-p ±10 % 15 dB or more 5 MHz to serial clock frequency

Displays component signals overlaid Displays component signals side by side x1 / x5 / variable Show / hide selectable Converts YCBCRsignals into GBR and displays the result. Digitally converts component signals into composite signals and displays the result. Displays by calculating Y-C

B and Y-CR

Uses bowtie signals (authorised by Tektronix, inc.) Selects GBR order or RGB order for the GBR conversion display Displays the selected line Brightness adjustment

V scale 0 V to 0.7 V, -0.3 V to 0.7 V % scale 0 % to 100 %, -50 % to 100 % x1, x5, and variable x0.2 to x10 ±0.5 %

±0.5 % 1 MHz to 30 MHz ±0.5 % 0.5 MHz to 15 MHz 20 dB or more at 20 MHz

±0.5 % 1 MHz to 5.75 MHz ±0.5 % 0.5 MHz to 2.75 MHz 20 dB or more at 3.8 MHz

Overlay: 1H, 2H Parade: 1H, 2H, 3H Timing: Y-C

B,Y-CR

4Y Parade*1: 4H

FEATURES

•

Two-Channel Serial Digital I/O

An SDI input unit contains two channels of SDI input connectors. The two connectors can also function as a dual link input of a single channel. SDI output that is reclocked using a serial signal is provided for each input. In addition, the SDI signal that is inputted to the ACH or the BCH can be outputted respectively from the ACH/BCH Reclockout output connector by interlocking with the input key of the front panel.

•

Video Signal Display Function

In addition to displaying the video waveforms, vectors, and pictures of the SDI signal on a full screen, 2- and 4-screen multi display can be shown. The multi display allows arbitrary combination of a single or multiple input signals to be displayed. (Multi display in which link A and link B are separated during dual link operation is not allowed.)

•

Error Detection Function

Detects various errors related to the SDI, embedded audio, and ancillary data including CRC errors and EDH errors.

•

Ancillary Data Analysis

Supports various types of ancillary data for analysis display. In particular.

•

5 BAR DISPLAY

Peak levels of video signals can be displayed in place of the vectors.

•

SDI-EXT REF Phase Difference Display Function

The SDI-EXT REF phase difference display function shows the phase difference between the SDI signal and the external sync signal (EXT REF).

•

Simultaneous Monitoring of Component and Composite Gamut Using the 5 Bar Displays

•

Japanese Caption Display Function (to be supported in the future)

•

Embedded Audio Demultiplex Function

The unit is equipped with a function for demultiplexing the embedded audio signal. Level meter and Lissajous displays can be achieved when used in combination with the digital audio unit (LV 58SER40A). The signal can also be output as AES/EBU.

•

Dual link input

■

OPTION

•

FS 3033 Cinelite II (Cinelite and Cinezone)

Format

Y, CB,C

4:2:2

Quantization

10bit

Scanning 1080i

1080p

1080PsF

720p

525 625

Standard Supported

SMPTE 274M SMPTE 292M

SMPTE

RP211

SMPTE 292M SMPTE 296M

SMPTE 292M

SMPTE 259M

Frame(Field) Frequency

60/59.94/50 30/29.97/25/ 24/23.98 30/29.97/25/ 24/23.98 60/59.94/50/ 30/29.97/25/ 24/23.98

59.94 50

Scanning

1080p

1080PsF

1080i 1080p

1080PsF

1080i 1080p 1080p

1080PsF

1080i

Quantization

10 bit

12 bit

10 bit

12 bit

Format

GBR 4:4:4

Y, CB,CR 4:2:2

Frame(Field) Frequency

30/29.97/25/ 24/23.98 30/29.97/25/ 24/23.98 60/59.94/50 30/29.97/25/ 24/23.98 30/29.97/25/ 24/23.98 60/59.94/50 60/59.94/50 30/29.97/25/ 24/23.98 30/29.97/25/ 24/23.98 60/59.94/50

Standard Supported

SMPTE 372M (1920x1080)

LV 58SER01A SDI INPUT SPECIFICATIONS

Ⅱ

option

Cinelite Cinezone

LV 58SER01A SDI INPUT

Plug-In Unit for LV 5800

Page 15

Magnification

Field Display

Display Format

Time Base Accuracy

Cursor Measurement

Configuration

Amplitude Measurement Time Measurement Frequency Display

Vectorscope Display

Scale Gain Variable gain Amplitude Accuracy IQ Axis Pseudo-Composite Display

Image Quality Adjustment

Phase Difference Display

Display

Display Range

Sync Signal Phase Difference Measurement of Dual Link(future support)

Picture Display

HDTV Display SDTV Display Marker Display

Gamut Error Display Line Select Image Quality Adjustment

Status Display

Status Display of SDI Signal

Signal Detection Format Equivalent Cable Length Measurement

Embedded Audio Channel

Error Detection of SDI signals

CRC Error EDH Error TRS Error Line Number Error

Illegal Code Error

Embedded Prohibition Error

Cable Length Meter Error

Error Detection of Embedded Audio

BCH Error

DBN Error Parity Error

Error Detection of Ancillary Data

Checksum Error Parity Error

Image Evaluation

Gamut Error

Composite Gamut Error

Level Error

Freeze Detection Black Detection

Event Log

Number of Logs

5 Bar Display

Bar Display

Analysis Function

Data Dump Display

Display Format

Line Select Sample Select Jump Function Data Output

Audio Control Packets

Display Content Group Selection

EDH Display

Standard Supported Display Content

Format ID Display

Standard Supported Display Content

Closed Caption Data Display

Standard Supported

Display Content Inter-Stationary Control Data (NET-Q) Display

Standard Supported

Display Content

Log Function V-ANC User Data Display

Standard Supported Arbitrary ANC Packet Display

Method of Specifying ANC Time Code Display

Corresponding Time Code

Display Method

Embedded Audio Processing

Clock Generation System

Closed Caption Processing (future support)

SMPTE System

Cable Length Measurement

Detection method

Supported Cables

Display Range

Accuracy Resolution

Frame Capture Function

Media Internal Memory Capacity

Data Output

Recalling Capture Data

Waveform Comparison

Power Consumption

Weight Accessory

Selects x1, x10, x20, ACTIVE, or BLANK *1 As for 4Y parade mode, two LV 58SER01A (SDI

INPUT unit) should be inserted, and four inputs need to synchronize in the same format each other together.

Overlay: 1V, 2V

(2V display not allowed for progressive) Parade: 1V, 2V, 3V Magnification: x1, x20, x40 ±0.5 %

Horizontal cursors: 2 cursors (REF and DELTA) Vertical cursors: 2 cursors (REF and DELTA) Measured in [%] and [V] Displayed in [usec] or [msec] Displays the frequency in which the time between cursors is considered a cycle.

Selects 75 % or 100 % (Using a color bar) Selects x1, x5, IQ-MAG or variable x0.2 to x10 ±0.5 % Selects show or hide Digitally converts component signals into composite signals and displays the result. (the color matrix for HDTV signal is converted into SDTV) Brightness adjustment

Displays the phase difference between the SDI signal and external sync signal numerically and graphically Holds and displays eight phase difference values being measured V direction ±1/2 Frame H direction ±1 Line *The phase difference display in the H direction may fluctuate in the range of ±1 clock when the signal is switched. HD tri-level sync or black burst

Displays phase difference between Link A and B with the number of the parallel reclock. (including ±1 clock error)

Displayed by sampling the pixels (8 bit RGB) Displayed by interpolating pixels (8 bit RGB) Center marker 4:3 or 16:9 marker display Safe action marker display Safe title marker display On picture indication of gamut errors Displays the selected line as a marker GBR gain adjustment, Contrast adjustment, Brightness adjustment

Detects the presence or absence of SDI signals. Auto format Detection

Converts the SDI signal attenuation into a coaxial cable length and displays the result. Displays the embedded audio channel number.

Detects transmission error of HD-SDI signals. Detects transmission error of SD-SDI signals. Detects errors in the TRS position and protection bit. Line number errors in the HD-SDI signals are being detected. Detects data in the range of 000h to 003h and 3FCh to 3FFh outside the TRS or ADF header. Detects the presence or absence of embedded audio at the embedded prohibition line. Detects the signal attenuation and displays the result.

Detects transmission errors of embedded audio packets in the HD-SDI signal. Detects sequential errors in audio packets. Detects parity errors in audio packets embedded in HD-SDI dignals

Detects transmission errors in the ancillary data. Detects parity errors in the ancillary data header.

Detects Gamut Errors by specifying duration and size. Upper limit: 90.8 % to 109.4 % (0.1 % steps) Lower limit: -7.2 % to +6.1 % (0.1 % steps) Monitors the level error when the component signal is converted into composite signal Upper limit: 90.0 % to 135.0 % (0.1 % steps) Lower limit: -40.0 % to 20.0 % (0.1 % steps) Detects Y C

B CR level errors

Y upper limit: -51 mV to 766 mV (1-mV resolution) Y lower limit: -51 mV to 766 mV (1-mV resolution) CBCRupper limit: -400 mV to 399 mV (1-mV resolution) C

BCR

lower limit: -400 mV to 399 mV (1-mV resolution) Detects video freeze Detects blackouts of the video signal

Error items, time stamps, etc.

Displays the Y GBR component Gamut and composite Gamut

Displayed by serial data sequence or channel separation. Displays the selected line Displays the selected sample Move to EAV or SAV by one-key operation Save data in text format to a PC via or Ethernet or USB memory.

Analyzes and displays the audio control packets One group is selected from four groups.

SMPTE RP-165 Analyzes and displays the EDH packets. Displays the received CRC errors.

SMPTE 352M ARIB STD-B39 Analyzes and displays the Format ID.

ARIB STD-B37,EIA/CEA-608,EIA-708 Analyzes and displays the closed caption data.

ARIB STD-B39 Analyzes and displays the Inter-Stationary Control Data. Logs Q signals

ARIB TR-B23

Selects DID or SDID

Selects LTC or VITC SMPTE RP-188 Switches the display of internal clock, and the time code.

SD-SDI: Generated from the video clock HD-SDI: Generated from the video clock Dual link (future support): Generated from the video clock

The closed caption data that is multiplexed in the SDI signal can be overlaid on the picture display. CEA/EIA-608-B embedded in the CDP packets as defined in CEA/EIA-708-B. CEA/EIA-608-B VBI(CEA/EIA-608-B Line21)

Converts the SDI signal attenuation into a coaxial cable length and displays the result. HD-SDI: Selects L-7CHD, LS-5CFB, or 1694A SD-SDI: Selects LS-5C2V, 8281, or 1505A HD-SDI: From under 5 m to 130 m or more (For L-7CHD: From under 10 m to 200 m or more) *

Less than 10 m to greater than or equal to 200 m for L-7CHD SD-SD: From under 50 m to 300 m or more ±20 m 5 m (For L-7CHD: 10 m)

Internal memory (RAM) or USB memory Video data 1 Frame 2 Systems For Dual Link mode: 1 Frame 1 system Save capture data to a PC via Ethernet network

or a USB memory. Recalls and displays the Picture/ Waveform/ Vector of 1 frame capture data. The capture data saved in the USB memory can be read back. (

Reading back operation is possible only if an SDI input

of the same format as the captured data is available

) Simultaneous display of captured data and real data.

Supplied from LV 5800 70 Wmax. (If one unit is installed to the LV 5800) 18 Wmax. (additional power consumption for each additional unit installed to the LV 5800)

0.28 kg, 0.6 lbs

Instruction manual ................................................1

Precautions Concerning Dual Link Operation

Aliasing occurs in the V sweep display of 1080p/60, 59.94, and 50, because the unit processes the sampling data. The picture display is processed using 8 bits even if the quantization is set to 12 bits. In addition, waveform display in external synchronization mode is not allowed if 1080p/60 (59.94) or 1080p/50 signal is applied.

Page 16

LV 5800 Platform Options

LV 58SER02 EYE PATTERN UNIT

Plug-In Unit for LV 5800

LV 58SER03 COMPOSITE VIDEO INPUT UNIT

Plug-In Unit for LV 5800

This unit displays eye patterns. It is installed in a LV 5800 input slot. By combining with the LV 5800 input unit, eye pattern waveforms of SDI signals can be monitored. Automatic measurement of parameters such as amplitude, rise time, and fall time is also possible.

FEATURES

•

HD-SDI, SD-SDI Format Support

•

6 Systems of Eye Pattern Displays and Jitter Measurement

Displays the SDI signal eye pattern or measures the jitter of one system among up to 6 systems by combining 3 SDI input units and selecting A or B among the three modules. (Two Eye units cannot be installed simultaneously.)

•

Eye Pattern Display

Displays the eye pattern of the timing jitter or alignment jitter by switching the filter.

•

Jitter Measurement

The jitter measurement by the phase detection method allows accurate jitter measurement even if the eye is barely open. In addition, timing jitter and alignment jitter can be measured.

•

Automatic Measurement

The eye pattern display allows automatic measurement of the eye pattern amplitude, rise time, and fall time. The jitter display allows automatic measurement of the timing jitter and alignment jitter values.

•

Jitter Display Using Video Sweep

Allows V sweep and H sweep displays.

•

Simultaneous Display on the Multi Display

The multi display allows the eye pattern waveform and jitter waveform to be displayed simultaneously. In addition, the eye pattern display screen automatically measures the eye pattern amplitude, rise time, and fall time, while the jitter display screen automatically measures the timing jitter and alignment jitter.

•

Alarm Monitoring

The alarm monitor mode allows the eye pattern amplitude, rise time, and fall time to be monitored with respect to the threshold level specified in advance. It also monitors the timing jitter and alignment jitter using the phase detection method. An alarm is displayed when the threshold level is exceeded. The alarm can also be logged.

Supported Formats

Data Rate

HD-SDI SD-SDI

Eye Pattern

Method Amplitude Accuracy Time Axis Time Axis Accuracy Jitter Filter

Jitter Detection

Method Time Axis Time Axis Accuracy Jitter Filter

Power Consumption

Weight Accessories

LV 58SER02 EYE PATTERN UNIT SPECIFICATIONS

SMPTE292M 1.485 Gbps, or 1.485/1.001 Gbps SMPTE259M 270 Mbps

Equivalent time sampling method 800 mV ±5 % for 800 mV input 2 / 4 / 16 Eye pattern Display ±3 % 10 Hz HPF 100 Hz HPF 1 kHz HPF 100 kHz HPF

Phase detection method H rate or V rate ±3 % 10 Hz HPF 100 Hz HPF 1 kHz HPF 100 kHz HPF (* Doesn't support JITTER measurement of a DVBASI standard Eye pattern only.)

Supplied from LV 5800 20 Wmax.

0.4 kg, 0.9 lbs

Coaxial cable .........................................................1

Instruction manual..................................................1

The LV 58SER03 provides the LV 5800 with two composite (NTSC/ PAL) inputs. The LV 5800's newest functions related to waveforms such as the waveform monitor, vectorscope, and simple picture monitor can be used on analog video signals of NTSC and PAL formats. For a description of the specifications other than those of this newly added option, see the specifications of the standard model. This unit in combination with the LV 58SER01A is suitable for monitoring in a mixed environment containing SDI and composite signals.

FEATURES

•

Input/Output

There are two input connectors: INPUT A and INPUT B. The selected channel is output from the PIX OUT connector on the rear panel.

•

Display

Waveform display, vectorscope display, picture display, and EXT REF phase display function are available. In addition, the luminance component can be displayed using a low-pass filter.

•

SCH Measurement Function

You can perform SCH measurements which are essential when editing the composite signal.

•

EXT REF Phase Display Function

Compares the input signal to the V.H sync signal of the external reference signal and displays the phase difference numerically and graphically. This function makes synchronization phase management easy.

•

Miscellaneous

Cursors can be used to measure the amplitude and time, with high accuracy.

Page 17

17 LV 58SER04 MPEG DECODER

Plug-In Unit for LV 5800

Measured Signal Supported Standards

Input

Composite Video Input Connector Input Impedance Input Return Loss Maximum Input Voltage

Output

Composite Video

Output Signal Output Connector Output Impedance Output Amplitude Frequency Characteristics

Display

WAVE Display VECTOR Display PICTURE Display

Waveform Display Section

Vertical Axis

Sensitivity

Gain Variable Gain Amplitude Accuracy Frequency Characteristics

Composite Signal

Step Response (for 1 V full scale, flat, 2T pulse, and 2T bar)

Overshoot Preshoot Ringing Pulse/Bar Ratio

Vertical Tilt Filter DC Restorer

LV 58SER03 COMPOSITE VIDEO INPUT UNIT SPECIFICATIONS

Composite video signal (NTSC/PAL) SMPTE 170M and ITU-R BT.470

Select A or B BNC connector 75 Ω ≥ 30 dB (up to 6 MHz) ±5 V (DC + Peak AC)

Active BNC connector 1 system 1 connector 75 Ω 1 Vp-p ± 5 % ±5 % 25 Hz to 5 MHz +5 % to -10 % 5 MHz to 5.6 MHz

Waveform display Vectorscope display Picture display

V Scale (PAL) -0.3 V to 0.7 V IRE Scale (NTSC) -40 IRE to 100 IRE Select x1 or x5 ≤ 0.2 to ≥ 2 ±1 %

±2 % 25 Hz to 5 MHz +3 % to -7 % 5 MHz to 5.6 MHz

±2 % ±1 % ±2 % ±1 % ±1 % Luminance filter Clamp to the back porch (fixed)

Horizontal Axis

Operation Mode Display Format

Line Display Line Magnification Field Display Field Magnification

Time Base Accuracy

Vectorscope Display Section

Sensitivity Gain Variable Gain Phase Accuracy Amplitude Accuracy Phase Adjustment Range Setup (NTSC) NTSC Display (PAL) IQ Axis SCH

Status Display Section

Display

Display Range

V direction H direction

Synchronization Signal

General Specifications

Environmental Conditions

Power Consumption Weight Accessories Picture Display Line Selector Cursor Measurement

Amplitude Measurement Screen Capture

Overlay Displays only a single waveform

1H or 2H Select x1, x10 or x20 1V or 2V Select x1, x20 or x40 ±1 %

Select 75 % or 100 % Using a color bar Select x1, x5, or IQ-MAG

0.2 to 2 ±2 ˚ ±3 % 360˚ Select 0 % or 7.5 % Select NTSC or PAL display Select show or hide Displays the SCH value numerically

Displays the phase difference between the composite signal and external sync signal numerically and graphically. Holds and displays eight phase difference values being measured.

±1/2 frame ±1/2 Line NTSC/PAL black burst signals

Conforms to the LV 5800 Supplied from the LV 5800 9 Wmax.

0.25 kg, 0.5 lbs

Instruction manual .................................................1

(Conforms to the LV 5800) (Conforms to the LV 5800) (Conforms to the LV 5800)

Measure in terms of [IRE] or [V] (Conforms to the LV 5800)

The LV 58SER04 is an input unit that receives MPEG-2 TS (DVBASI) signals and displays video/audio information on the LEADER LV 5800 (Multi Monitor). Because it contains an MPEG-2 video decoder and audio decoder, it can display the signal using the video signal waveform display, vectorscope display, picture display, and audio display. The LV 58SER04A can also be used to monitor errors defined by ETSI ETR-290, to display PAT and PMT data, and to display the TS bit rate and the bit rate for each PID. These features are ideal for continuous monitoring of MPEG-2 TS signals in broadcasting stations and similar facilities. In addition, the LV 58SER04 can do the following when combined with other units.

*1 Cannot descramble broadcast scrambling. May not be able to decode all

MPEG-2 data formats. *2 Dolby is a trademark of Dolby Laboratories. *3 When decoding Dolby Digital(AC-3), Dolby E option is necessary for the LV

58SER40A(DIGITAL AUDIO)separately. *4 There are some limitations on the error detection feature. *5 Jitter cannot be displayed even if the LV 58SER02 is used.

• Eye pattern display of DVB-ASI signals (when combined with the LV 58SER02).

• Lissajous and level displays of audio signals (when combined with the LV 58SER40A).

FEATURES

•

DVB-ASI Input Connector

The unit comes with one DVB-ASI input connector.

•

Video Decoding

Decodes compressed video data on the MPEG-2 TS (MPEG-2 Video 4:2:2, 4:2:0) and displays a video signal waveform, vectorscope, or picture.

•

Audio Decoding

Combine with the LV 58SER40A (DIGITAL AUDIO) to decode audio data on the MPEG-2 TS and show Lissajous, sound image, and level meter displays as well as outputs digital audio signals. The decodable audio data types are MPEG-2 AAC, Dolby

Digital (AC-3)*3, and LPCM (SMPTE 302M)

•

PID Search

Video and audio search for PID automatically.

•

Error Detection

Monitors and displays ETSI ETR 290 priority 1 and 2 errors.

•

Status Display

Displays packet bit rates and measures PCR jitter. Displays PAT, PMT, and a selected packet dump.

•

Eye Pattern Display

Combine with the LV 58SER02 (EYE PATTERN unit) to display DVB-ASI eye patterns.

Standards

Supported Standards Profile and Level

DVB-ASI I/O

Input Connector

Input Connector Number of Input Connectors Maximum Input Voltage

Input Signal

Serial Clock Transmission Mode Maximum Bit Rate Supported Packet Sizes Packet Size Detection

LV 58SER04 MPEG DECODER SPECIFICATIONS

ISO/IEC 13818-1 MP@HL, MP@ML, 422@ML, 422P@HL

BNC-R 1 connector, 75 Ω ±2 V (DC + peak AC)

270 MHz Packet/Burst 66 Mbps 188, 204, and 208 bytes Audio Detects supported packet sizes

Page 18

LV 5800 Platform Options

Decoding Function

Video Formats:

Audio Signals

Video Signal Waveform Display Function

Waveform Operation

Display Mode

Y, CB, CRto G, B, R Conversion

Pseudo-Composite Display

Channel Assignment

Line Select Image Quality Adjustment

Vertical Axis

Sensitivity

V Scale % Scale Gain Variable Gain Amplitude Accuracy

HDTV Frequency Characteristics

Y Signal C

B,CR signal

Low-pass Attenuation

SDTV Frequency Characteristics

Y Signal C

B,CR signal

Low-pass Attenuation

Horizontal Axis

Line Display

Display Mode

Magnification

Field Display

Display Mode

Magnification Time Accuracy

Cursor Measurement

Composition

Horizontal Cursors

Vertical Cursors Amplitude Measurement Time Measurement Frequency Measurement

1920x1080i / 59.94, 60, 50 (4:2:0,4:2:2) 1440x1080i / 59.99, 60, 50 (4:2:0,4:2:2) 1280x720p / 59.94, 60, 50 (4:2:0,4:2:2) 720x480i / 59.94 (4:2:0,4:2:2) 720x576i / 50 (4:2:0,4:2:2) MPEG-2 AAC, Dolby Digital(AC-3), MPERG-1 LAYER-2

LPCM(SMPTE 302M) (LV 58SER40A (DIGITAL AUDIO) is necessary separately. In addition, when decoding Dolby Digital (AC-3), Dolby E option is necessary) *

This unit decodes only one set of video data and audio data. Even if you use the LV 5800 multi display, the unit cannot decode different video and audio streams simultaneously. If you assign the display showing the data that this unit is decoding to multiple displays and you change the PID of the data being decoded, the PIDs on all displays change simultaneously.

Overlay display

(displays component signals overlaid)

Parade display

(displays component signals side by side) Converts Y, CB, CR signals into G, B, R and displays the result Displays component signals artificially as composite signals G, B, R or R, G, B order (when displaying G, B, R converted signals) Displays the selected line Adjusts the brightness

0 to 0.7 V, -0.3 to 0.7 V 0 to 100 %, -50 to 100 % x1, x5, variable x0.2 to x2 ±0.5 %

±0.5 % (1 to 30 MHz) ±0.5 % (0.5 to 15 MHz) 20 dB or more (at 20 MHz)

±0.5 % (1 to 5.75 MHz) ±0.5 % (0.5 to 2.75 MHz) 20 dB or more (at 3.8 MHz)

Overlay: 1H, 2H *

Parade: 1H, 2H, 3H x1, x10, x20, ACTIVE, BLANK

Overlay: 1V, 2V *

Parade: 1V, 2V, 3V x1, x20, x40 ±0.5 %

2 cursors (REF and DELTA) 2 cursors (REF and DELTA) Percentage and voltage displays Displays time in seconds Displays the frequency by considering the time between cursors to be a cycle *1 The 2V display is not allowed if the input signal

is progressive.

Vectorscope Display

Scale Gain Variable Gain Amplitude Accuracy IQ Axis Pseudo-Composite Display

Image Quality Adjustment

Picture Display

HDTV Display SDTV Display Marker Display

Line Select Display Size Image Quality Adjustment

Section and PCR Information

PAT

PAT Detection

Cycle Measurement

PAT data display

PMT

PMT Detection Cycle Measurement

PMT data display

NIT

NIT Detection

Cycle Measurement

CAT

CAT Detection Cycle Measurement

PCR

PCR detection

Cycle Measurement

PCR jitter

Dump Display

Function

Notation

Bit Rate Display

Function

Bar Display

Displayed Sections Displayed Packets

General Specifications

Environmental Conditions Power Supply

Weight Accessory

75 %, 100 % (for the color bars) x1, x5, IQ-MAG, variable x0.2 to x2 ±0.5 % Show or hide Displays component signals by converting to composite signals that have burst added artificially. (The color matrix for HDTV signals is converted to SDTV.) Adjusts the brightness

Displayed by sampling pixels Displayed by interpolating pixels Center marker display 4:3 or 16:9 marker display Safe action marker display Safe title marker display Marks the selected line Optimized display, actual size display GBR level adjustment, contrast adjustment, brightness adjustment

Automatically recognizes packets whose PID is 0000h as PAT Measures the PAT cycle in 1-ms intervals PAT dump display

Select the PID of the PMT to be decoded Measures the PMT cycle in 1-ms intervals PMT dump display

Automatically detects packets with the NIT PID specified by the PAT. Measures the NIT cycle in 1-ms intervals

Recognizes packets whose PID is 0001h as CAT Measures the CAT cycle in 1-ms intervals

Automatically detects packets with the PCR PID specified by the selected PMT Measures the PCR cycle in 1-ms intervals Measures the PCR accuracy based on the internal reference clock

*2: If a section is divided into multiple TS packets,

the cycle is measured for each section.

Dump display of the PAT, PMT, and the dump display of the selected packet Displays binary and hexadecimal values and contents

Displays the bit rate and cycle of the main sections and packets Displays the occupied bandwidth with respect to the TS bit rate using bars NIT, CAT, PAT, and PMT Video, audio, PCR, and null

Conforms to the LV 5800 Supplied from the LV 5800 70 W max. (if one unit is installed to the LV 5800) 20 W max. (additional power consumption for each additional unit installed to the LV 5800)

0.4 kg, 0.9 lbs

Instruction manual..................................................1

LV 58SER20 DVI-I OUTPUT UNIT

Plug-In Unit for LV 5800

This unit is a DVI-I OUTPUT unit that outputs the contents displayed on the front LCD panel from the DVI-I connector to an external monitor. The unit is installed in a LV 5800 output slot.

FEATURES

•

DVI-I Connector

The connector allows the screen displayed on the LV 5800 to be shown on an external monitor. The DVI output provides both digital and analog output allowing the signal to be used on a wide variety of XGA-compatible monitors.

DVI-I Connector

Signal Format

Display Format DDC Function HOT PLUG Detection Function Output Connector

Power Consumption

Weight Accessory

LV 58SER20 DVI-I OUTPUT UNIT SPECIFICATIONS

Single Link T.M.D.S Analog RGB XGA (Effective area 1024x768 dots) Not supported Not supported DVI-I 1 system

Supplied from LV 5800 5 Wmax.

0.2 kg, 0.4 lbs

Instruction manual..................................................1

Page 19

19 LV 58SER40A DIGITAL AUDIO

Plug-In Unit for LV 5800

The LV 58SER40(A) (DIGITAL AUDIO) operates as an AES/EBU I/O unit when installed in a LV 5800 input slot or as an AES/EBU output unit when installed in a LV 5800 output slot. It allows the LV 5800 to display Lissajous, sound image, level meter, and signal status displays*

for data in 8 AES/EBU channel pairs (16 channels)*

and 2 analog audio chan-

nels.*

If the LV 58SER01A (SDI INPUT) is installed in the LV 5800, this unit can process AES/EBU signals that are embedded in SDI signals. If the LV 58SER04 (MPEG DECODER) is installed, this unit can process MPEG-1 Layer 2, MPEG-2 AAC, AC3 and LPCM that are embedded in DVB-ASI signals.

FEATURES

•

8 AES/EBU I/O Pairs (16 Channels)

This unit operates as an AES/EBU I/O unit when installed in a LV 5800 input slot or as an AES/EBU output unit when installed in a LV 5800 output slot.

•

Headphone Output

When you install this unit into an LV 5800 input slot, you can listen to the selected channel audio using a headphone.

•

Various Display Features

This unit enables the LV 5800 to display the following items on the AES/EBU input signals.

•Single Lissajous display between any two channels

•Multi Lissajous display that simultaneously shows 4 or 8 single Lissajous displays of different channel pair combinations.

•Sound image display

•Meter display

The unit also enables the LV 5800 to display the following AES/EBU signal status bits.

• Channel status bit

• User bit

• Validity bit

• Parity bit

* You cannot assign the audio measurement display to multiple areas

•

Analog Audio Input

The LV 58SER40A can measure analog audio signals on 2 channels.

•

Dolby Decoding Capability (Optional)

* Dolby E, Dolby Digital is a trademark of Dolby Laboratories.

Input and Output Signals

Supported Formats Sampling Frequency

Rear BNC Connectors

Maximum Input Voltage Output Voltage I/O Connectors

Input/Output Impedance Input and Output Switching

Analog Audio Input

Maximum Input Voltage Input Connector

Input Impedance

Waveform Displays

Lissajous Display

Sound Image Display

Channel Mapping Surround Formats

Correlation Meter

Meter Display

During Multi Lissajous Display

During Single Lissajous Display

Response Mode Selection

LV 58SER40A LV 58SER40

Peak Hold Mode Selection

LV 58SER40A

LV 58SER40 Peak Hold Time Display dynamic range

Reference Level Setting Warning Level Setting Over Level Setup

Status Display

Channel Status Bit Display

User Data Bit Display

Dolby E Metadata Display

Dolby Digital Metadata Display

Error Detection

Level Over Detection

Detection Setting

Clip Detection

Detection Setting

Mute Detection

Detection Setting

Parity Error Detection

Validity Error Detection

CRC Error Detection

Code Violation Detection

Headphone Output

Output Connector

Output Power General Specifications

Environmental Conditions Power Consumption

Weight Accessories

LV 58SER40A DIGITAl AUDIO SPECIFICATIONS

IEC60958, Dolby E* (option), Dolby Digital* (option) 48 kHz

± 5V (DC + ACpeak)

1.0 Vp-p ± 10 % (into 75 Ω) BNC connectors (eight channels in four-channel pairs) 75 Ω Whether to use the connectors as audio signal input connectors or as output connectors for audio signals that are embedded in SDI or DVB-ASI signals is selectable on the LV 5800.

+18 dBm (6.2 Vrms) D-Sub 25-pin connector on the LV 5800 (DC-coupled balanced input) At least 5 kΩ * The LV 58SER40 does not support analog audio input.

Single Lissajous display between any two channels Multi Lissajous display that simultaneously shows 4 or 8 single Lissajous displays of different channel pair combinations.

L, R, C, LFE, Ls(S), Rs, LL, RR 3-1, 3-2, 3-2-2

Displays the correlation between 2 channels in the range of -1 to 1

Displays the levels of 8 channels or 16 channels on a bar graph Displays the levels of 2 selected channels on a bar graph

TRUE PEAK, PPM type I, PPM type II, VU TRUE PEAK, PPM, VU (when the meter response mode is VU) TRUE PEAK, PPM type I, PPM type II TRUE PEAK, PPM

0.5 to 5.0 s (in 0.5-s steps), HOLD

-60 dBFS, -90 dBFS

-40.0 to 0.0 dBFS

-40.0 to 0.0 dBFS *1 The LV 58SER40 PPM (Peak Program Meter) and

the LV 58SER40A PPM type I are equivalent.

*2 Fixed at -60 dBFS when measuring an analog

audio signal.

Dump display, text display Dump display Text display Text display Counts the number of errors for each channel Counts the number of times the input signal level exceeds the specified level

-40.0 to 0.0 dBFS Detects an error when the number of maximum signal values that are received consecutively exceeds the specified number of samples and counts the number of times this error occurs 1 to 100 samples Detects an error when the length of a received mute signal exceeds the specified duration, and counts the number of times this error occurs 1 to 5000 ms Counts the number of times the input signal parity bit differs from the parity bit value that the LV 58SER40(A) calculates Counts the number of times the input signal validity bit is 1 Counts the number of times the input signal CRC value differs from the CRC value that the LV 58SER40(A) calculates Counts the number of times the input signal biphase modulation status is in error

3.5 mm stereo mini jack

121.5 mWrms max. (into 8 Ω)

The same as the LV 5800 9 Wmax. supplied from the LV 5800

0.27 kg, 0.6 lbs

Instruction manual .................................................1

Analog audio cable

(LV 58SER40A only) ..............................................1

*1 All AES/EBU signals must be synchronized. This unit only supports 48 kHz

sampling frequency.

*2 The standard LV 58SER40(A) provides 4 AES/EBU channel pairs (8 chan-

nels). Installing the optional I/O expansion unit expands the I/O connectors to 8 AES/EBU channel pairs (16 channels).

*3 The LV 58SER40 does not support the measurement of analog audio signals.

Page 20

VIDEO

LV 5800/LV 7800 Platform Options

LV 58SER06 3G-SDI INPUT

This 3G-SDI input unit can be installed into an input slot of an LV 5800 (multi monitor) or into an LV 7800 (multi rasterizer). The LV 58SER06 supports 3G-SDI levels A and B, and it can be used to display information such as 3G-SDI signals' video waveforms, vector waveforms, pictures, and error detection results on an LV 5800 or LV 7800. Additionally, by combining the LV 58SER06 with the LV 58SER40A, you can display information such as the Lissajous curves and level meters of embedded audio signals. What's more, the LV 58SER06 can generate 3G-SDI signals and test patterns.

FEATURES

Two Serial Digital Inputs

■

The LV 58SER06 has two switchable 3G-SDI input connectors for monitoring.

Two Serial Digital Outputs

■

The LV 58SER06 can reclock input signals that are received by the input terminal that has been selected with the input key (3G-SDI A or 3G-SDI B) and generate these reclocked signals from the 3G-SDI A/B output connector. From the 3G-SDI B output connector, the LV 5800 can transmit a reclocked signal from the 3G-SDI signal that is received through the 3G-SDI B input connector.

Test Pattern Signal Outputs

■

The LV 58SER06 can operate as a 3G-SDI signal pattern generator to generate a 3G-SDI signal from the two output terminals.

Video Signal Display

■

The LV 58SER06 can be used to display 3G-SDI signals' video signal waveforms, vector waveforms, and pictures on not only the 1-screen display, but 2- and 4-screen multi displays.

Error Detection

■

The LV 58SER01A can detect CRC and other 3GSDI signal errors that are related to embedded audio signals and ancillary data.

Automatic Video Format Setting

■

The LV 58SER06 automatically sets the video format based on payload ID packets.

5 Bar Display

■

You can use the 5 bar display to simultaneously monitor component and composite gamut.

Embedded Audio Extraction

■

By combining the LV 58SER06 with a digital audio unit (the LV 58SER40A), you can perform actions such as displaying level meters and Lissajous curves. You can also generate AES/EBU signals.

SPECIFICATIONS

Video Formats and Corresponding Standards

3G-SDI Video Signal Formats and Corresponding Standards

Color System Quantization

, CR 4:2:2 10 bits 1080p 60, 59.94, 50

Y, C

Other Standards Ancillary Data: SMPTE 291M Embedded Audio: SMPTE 299M

Format Setting: Manual and automatic Manual: Manually set the frame frequency Automatic: The LV 58SER06 detects the format informa-

Output Signal

Depending on your selection, the LV 58SER06 generates a reclocked signal (input loop-through) from the input signal or generates a test pattern signal, and transmits it from the 3G-SDI A/B output connector and the 3G-SDI B output connector.

3G-SDI A/B Output Connector

When Set to Input Reclock

When Set to Test Pattern

3G-SDI B Output Connector

When Set to Input Reclock

When Set to Test Pattern

Test Pattern Generation Format: Y, C

Corresponding Standard

Pattern: 100 % color bar (100 % white, 100 % satu-

Embedded Audio: Not supported Bit Rate: 2.97 Gbps or 2.97/1.001 Gbps Oscillation Clock: Driven by the internal oscillator

I/O Connectors

3G-SDI Input Connectors Input Connectors: 2 BNC connectors

2 connections (channels A and B)

Input Impedance: 75 Ω Input Return Loss: 15 dB or greater (5 MHz to 1.485 GHz)

10 dB or greater (1.485 to 2.97 GHz)

Maximum Input Voltage

3G-SDI Output Connectors Function: Generation of reclocked signals from the in-

Output Connectors: 2 BNC connectors Output Impedance: 75 Ω Output Return Loss: 15 dB or greater (5 MHz to 1.485 GHz)

10 dB or greater (1.485 to 2.97 GHz)

Output Voltage: 800 mVp-p ± 10 %

Waveform Display

Waveform Operations Display Modes Overlay: Overlays component signals Parade: Displays component signals side by side Blanking Period: Show or hide

Y, CB, CR to GBR Conversion

Pseudo-Composite Display

Channel Assignment: Displayed in GBR or RGB order (when dis-

Line Select: Displays the selected line Display Adjustment: Brightness adjustment and waveform color

(Multi color is only available on the 1-screen



Scanning Frame Frequency

(

Only the audio data of data stream 1 is supported.

tion within the payload ID (SMPTE 325M) and automatically sets the format.

: Generates a reclocked signal from the signal

received through the selected input channel.

: Generates a test pattern signal

: Generates a reclocked signal from the signal

received through input channel B

: Generates a test pattern signal

: SMPTE424M and SMPTE425M

ration),75 % color bar (100 % white, 75 % saturation),100 % white, 50 % white, black, check eld, equalizer, and PLL

148.5 MHz ± 10 ppm or 148.5/1.001 MHz ± 10 ppm

: ±2 V (DC + AC peak)

put signals and generation of test patterns

: Converts the Y, CB, CR signal to GBR and dis-

plays it

: Displays component signals artificially as

composite signals

playing GBR converted signals)

selection (white, green, or multi color)

display.)

Format

, CR 4:2:2 1080p/60, 59.94, 50

Corresponding

Standard

SMPTE 424M SMPTE 425M

)

Page 21

Vertical Axis Sensitivity V Scale: 0 to 0.7 V or –0.3 to 0.7 V % Scale: 0 to 100 % or –50 to 100 % Gain: ×1, ×5, or variable Variable Gain: ×0.2 to ×10 Amplitude Accuracy: ±0.5 % Frequency Response Y Signal: ±0.5 % (1 to 60 MHz)

, CR Signal: ±0.5 % (0.5 to 30 MHz)

Low-Pass Attenuation

: 20 dB or greater (at 40 MHz)

Horizontal Axis Line Display Display Format: Overlay: 1H, 2H

Parade: 1H, 2H, 3H

Magnication: ×1, ×10, ×20, ACTIVE, or BLANK Field Display Display Format: Overlay: 1V

Parade: 1V, 2V, 3V

Magnication: ×1, ×20, ×40 Time Accuracy: ±0.5 % Cursor Measurement Composition Horizontal Cursors: 2 (REF and DELTA) Vertical Cursors: 2 (REF and DELTA)

Amplitude Measurement

: Percentage and voltage displays

Time Measurement: Second display

Frequency Measurement

: Computes and displays the frequency with

the length of one period set to the time between two cursors

Vectorscope Display

Scale: 75 % or 100 % (color bar) Gain: ×1, ×5, IQ-MAG, or variable Variable Gain: ×0.2 to ×10 Amplitude Accuracy: ±0.5 % IQ Axis: Show or hide

Pseudo-Composite Display

: Converts component signals into composite

signals with articially added burst and dis-

plays the results (The color matrix is converted to SDTV.)

Display Adjustment: Brightness adjustment and waveform color

selection (white or green)

Picture Display

Display Format: Samples pixels and displays them (R, G, and

B each use 8 bits)

Marker Displays: Center marker, 4:3 marker, safe action

marker,and safe title marker

Gamut Error Display: Marks the areas of the picture that exhibit

gamut errors

Line Select: Marks the selected line Display Sizes: Compressed and full frame

Image Quality Adjustment

: G, B, R level; contrast; and brightness adjustment

Status Display

3G-SDI Signal Status Display Signal Detection: Detects the presence of a 3G-SDI signal Format:

Detects from the supported video signal formats

(When the LV 58SER06 is configured to

automatically set the format, the format is detected from the payload ID.)

Embedded Audio Channel

Displays the embedded audio channel number

(Only the audio data of data stream 1 is sup-

ported.)

3G-SDI Signal Error Detection CRC Error: Detects 3G-SDI signal transmission errors TRS Error:

Detects TRS position and protection bit errors

Line Number Error: Detects 3G-SDI signal line number errors Illegal Code Error: Detects data within the range of 000h to

003h and 3FC to 3FF in locations other than the TRS and ADF headers

Ancillary Data Error Detection Checksum Error: Detects ancillary data transmission errors Parity Error: Detects ancillary data header parity errors Image Quality Error Detection Frequency Response: Approx. 1 MHz LPF (IEEE STD 205 response)

and approx. 2.8 MHz LPF (removes transient composite gamut and gamut errors due to overshoot and other anomalies)

Gamut Error: Detects time-specied gamut errors Upper Limit: 90.8 to 109.4 % Lower Limit: –7.2 to 6.1 % Area Specication: 0.1 to 5.0 % Time Specication: 1 to 60 frames

Composite Gamut Error

: Detects level errors that occur when com-

ponent signals are converted to composite signals

Upper Limit: 90.0 to 135.0 % Lower Limit: –40.0 to 20.0 % Area Specication: 0.1 to 5.0 % Time Specication: 1 to 60 frames Embedded Audio Error Detection (Only data stream 1 is supported for 3G-SDI level B.)

BCH Error: Detects transmission errors in the audio

packets that are embedded in 3G-SDI signals

DBN Error: Detects audio packet continuity errors Parity Error: Detects parity errors in the audio packets

that are embedded in 3G-SDI signals

Embedded Position Error

: Detects the presence of audio in lines where

it should not be embedded

Event Log Recorded Events: Errors, changes in the input channel, and

time stamps

5 Bar Display

Bar Display: Displays the Y GBR component and com-

posite gamut

(When you are using line select, only the

component gamut of the selected line is detected.)

Error Level Setting Component Gamut: The same as the gamut error Composite Gamut: The same as the composite gamut error Frequency Response: The same as the gamut error

Analysis Features

Data Dump Display Display Format: Displays data separated by serial data se-

quence or by channel

(The 3G-SDI level B data dump can display

data stream 1, data stream 2, and data stream 1 and 2 simultaneously.)

Line Select: Displays the selected line Sample Select: Displays from the selected sample Jump Feature: Moves to EAV or SAV with the press of a

single button

Data Output: Data can be saved as text les to USB mem-

ory or to a PC over an Ethernet

Audio Control Packet Display (Only data stream 1 is supported for 3G-SDI level B.)

Display Details: Displays audio control packet analysis Display Format: Text, hexadecimal, and binary Group Selection: Select one group from four available groups Format ID Display

Corresponding Standard

: SMPTE 352M

Display Details: Displays payload ID packet analysis

ANC Packet Display (Only data stream 1 is supported for 3G-SDI level B.)

ANC Specication Method

: DID/SDID

Display Format: Hexadecimal and binary

Time Code Display (Only data stream 1 is supported for 3G-SDI level B.)

Supported Time Codes

Display Mode:

: LTC and VITC (SMPTE 12M-2)

The instrument's internal clock or the time code

Embedded Audio Processing

Clock Generation: Generated from the video clock Synchronization: All audio channels must be synchronized to

the video clock.

Phases: All phases must be in-sync. Channel Separation: You may select a maximum of 4 groups of 16

channels each.

(Only data stream 1 is supported for 3G-SDI

level B.)

* You need an LV 58SER40A unit to display and generate audio.

Frame Capture Feature

Function: Captures frame data Capture Timing: Manual and automatic (error capture) Display: Displays the captured frame data or superim-

poses the captured frame data over the input

signal

Media: Internal memory (RAM) and USB memory

You can only record one frame of data to the

internal memory.

Data Output:

Screen captures can be saved as .dpx les, .tif

les, or in a le format that the instrument can

load. They can be saved to USB memory or

sent to a PC through an Ethernet connection.

Data Input: Data saved to USB memory can be loaded

and displayed on the instrument.*1

Error Capturing: Automatically captures frame data when an

error occurs

*1 Captured data cannot be displayed unless the instrument is receiving

a 3G-SDI signal that matches the format of the captured signal.

Environmental Conditions

Conforms to those for the LV 5800 or LV 7800

Power Consumption

Supplied by the LV 5800 or LV 7800; 18 W max. (This is the power consumption for a single

LV 58SER06 unit installed in an LV 5800 or LV

7800.)

Weight

0.24 kg

Accessory

Instruction manual .......................................1

Page 22

VIDEO

MULTI RASTERIZER

Simultaneous Multiple Input Viewing and Monitoring

Monitor not included

HD-SDI

SD-SDI

LV 7800

MULTI RASTERIZER

GENERAL

The LV 7800 is a new-concept multi rasterizer that enables you to freely combine all the LV 5800 series input and output units to provide  exible support for a variety of situations.

FEATURES

Slots for Four Units

■

The LV 7800 is equipped with two input slots and two input/output slots, which means you can install a maximum of four units. Each input and output unit operates independently

Exter

■

nal Sync Signal Input

The LV 7800 can receive tri-level sync signals and NTSC or PAL black

burst signals. You can display video signal waveforms in

phase with an external sync signal.

DVI-I Connector

You can view the various LV 7800 displays on an external XGA (1024 × 768) display by connecting the display to the DVI-I connector Additionally, the vector, picture, and audio displays support displays with aspect ratios of 16:9 (in squeeze mode).

Display Examples

■

Multi-Screen

4 Input Picture

Waveform/4YPalade

Squeezemode

Supports aspect ratios of 4:3 and 16:9.

eset Settings

■

The LV 7800 can store up to 60 frequently used setting con gurations. Y

ou can also directly recall preset settings that have been

assigned to the shortcut button.

Key Lock

■

The key lock feature is useful in preventing mistaken changes to the settings and in pr

USB Port

■

By connecting a USB memory device to the front panel USB port, you can take scr

Ether

■

net Port

By running TELNET or FTP on a PC that is connected to the LV 7800

ough the rear panel Ethernet port, you can control the LV 7800

thr remotely, monitor errors, and transfer  les. (SNMP is also supported.)

Parallel Remote Connector

You can load preset settings, detect errors, switch inputs, and apply analog audio signals* thr *To measure analog audio signals, an LV 58SER40A (DIGITAL AUDIO) unit is necessary.

eventing accidental operations on the LV 7800.

een captures, record data, and save preset settings.

ough the rear panel remote connector.

Waveform/Vector

Status

EX, LV 58SER01A, LV 58SER02 1 sets each are installed

5 Bar/Gamut

EX, LV 58SER01A 1 set is installed

EX, LV 58SER01A 2 set are installed

EyePattern/Jitter

EX, LV 58SER01A 2, LV58SER02 1 sets are installed

EX, LV 58SER01A 2 sets are installed

MPEG

EX, LV 58SER04 1 set is installed

EX, LV 58SER01A 1 set is installed

Audio

EX, LV 58SER40A 1 set is installed

EX, LV 58SER01A 1 set is installed

Composite

EX, LV 58SER03 1 set is installed

Page 23

SPECIFICATIONS



LV 7800

Input/Output Slots

SLOT1, SLOT2: Slots for input units

SLOT3, SLOT4:

Slots for input, output, or input/output units

Combinations of Supported Units

LV 7800 Slots

Unit

LV 58SER01A (SDI INPUT) Yes Yes Yes Yes

LV 58SER02 (EYE PATTERN) Yes* Yes* Yes* Yes*

LV 58SER03

LV 58SER04 (MPEG DECODER) Yes Yes Yes Yes

LV 58SER06 (3G-SDI INPUT) Yes Yes Yes Yes

LV 58SER20 (DVI-I OUTPUT) No No Yes Yes

LV 58SER21 (ANALOG COMPONENT OUTPUT)

LV 58SER40A (DIGITAL AUDIO) Yes* Yes* Yes* Yes*

* Only one of this type of unit can be installed in an LV 7800.

(COMPOSITE INPUT)

Does the Slot Support the Units

SLOT1

SLOT2

(Input)

Ye s Ye s Ye s Yes

No No Yes Yes

SLOT3

(Input/Output)

SLOT4

DVI-I Output

Output Connector: 1

Signal Format: Single link T.M.D.S

Analog RGB

Display Format:

XGA(The effective resolution is 1024 × 768.) Wide displays are also supported (squeeze mode). * Only if the LCD panel has a resolution conversion feature.

DDC: Not supported HOT PLUG: Not supported

Screen Capture

Screen Capture:

Capture the screen to an image le (only one screen capture is stored in internal memory)

Media:

Internal memory (RAM) and USB memory

Data Output: Save screen captures in bitmap format

to USB memory or send them to a PC over an Ethernet connection.

Preset Settings

Number of Presets: 60

Media:

Internal memory (RAM) and USB memory

Recall Method: Front panel, remote connector, or Eth-

ernet command

Copying Saved Settings Loading Saved Settings

: Copy preset settings to USB memory.

: Copy all preset settings from USB

memory to the LV 7800.

External Sync Signal Input

Input Connector: 1 pair of BNC connectors

Input Signal: Tri-level sync or NTSC/PAL black burst

Input Impedance: Passive loopthrough, 15 kΩ Input Return Loss: 30 dB or higher Maximum Input Voltage: ±5 V (DC + peak AC)

* If the video signal waveform is displayed using an external sync signal

as a reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indenite.

External Control Connectors

USB Port

Compliant Standard

Device:

: 2.0

Only large-memory devices are supported.

Function: Take screen captures, record data,

and save preset settings

Ethernet Port

Compliant Standard

: IEEE802.3 10BASE-T/100BASE-T

Connector: RJ-45 Function: Control the LV 7800 and monitor errors

from a PC and save screen captures and data to a PC

Remote Connector Connector: 25-pin D-sub (female) Signal: LV-TTL level (Low active) Function:

Load preset settings, detect errors, switch inputs, and receive analog audio signals*

* To measure analog audio signals, an LV 58SER40A (DIGITAL AUDIO)

unit is necessary.

Headphone Output*

Output Signal: SDI-embedded audio signal, or an

audio signal that was received from an external source

Output Connector: One 6.3-mm stereo jack Volume Adjustment: Volume knob

* Headphone output is enabled when an LV 58SER40A (DIGITAL AUDIO)

unit is installed.

Environmental Conditions

Operating Temperature

: 0 to 40 °C

Operating Humidity: 85 %RH or less (no condensation)

Operating Environment

: Indoors

Operating Altitude: Up to 2,000 m

Overvoltage Category

: II

Pollution Degree: 2

Power Supply Requirements

90 to 250 VAC, 50-60 Hz, 150 W max.

Dimensions and Weight

482 (W) × 88 (H) × 450 (D) mm (not in-

cluding protrusions), 8.5 kg

Accessories

Instruction manual ........................... 1

Power cord ...................................... 1

Cover/Inlet stopper ..........................1

25-pin D-sub connector...................1

25-pin D-sub connector cover .........1

Rear Panel (LV 58SER01A × 3 and LV 58SER40A × 1)

■

Optional Units

■

LV 58SER01A

SDI input

(Factory Option) Each unit is the same as the 5800 series units.

LV 58SER02

Eye pattern unit

LV 58SER03

Composite video input

LV 58SER04

MPEG decoder

LV 58SER06*

3G-SDI INPUT

LV 58SER20

DVI-I output unit

LV 58SER21

Analog component output

LV 58SER40A

Digital audio I/O

* To be supported in the future

Page 24

VIDEO

MULTI SDI RASTERIZER

Low-Cost Multi SDI Rasterizer

GENERAL

FEATURES

The LV 7330 is a highly functional, compact, light-weight SDI rasterizer that boasts exceptional cost performance. When the LV 7330 is connected to an external XGA or WXGA monitor, it can display the picture of an HD-SDI or SD-SDI signal in addition to video signal waveforms, vectors, audio data, and data analyses of the signal. The LV 7330 also comes standard-equipped with CINELITE II, a convenient tool for analyzing luminance data.

■

SDI I/O

The LV 7330 has two SDI input connectors that can be used for both HD-SDI and SD-SDI input. It also has an SDI output connector that you can use to send a reclocked SDI signal.

■

DVI Output



The various LV 7330 displays are transferred through a DVI-I connector to an XGA (1024 × 768) display. The LV 7330 also uses a squeeze method to support aspect ratios of 16:9 (1366 × 768) and 15:9 (1280 × 768).

■

CINELITE II

The LV 7330 comes standard-equipped with CINELITE II (CINELITE and CINEZONE), which is a video signal luminance information analysis tool. With CINELITE, you can use the cursor to select any 3 points and display their f-Stop numbers, percentage values, and level values. You can choose to analyze a single pixel or a small area by setting the size of the measured area to 1 pixel or to the average value for 9 or 81 pixels. With CINEZONE, you can display the luminance levels in the picture using different colors. This allows you to quickly determine the overall luminance distribution in the picture, and it makes it easy to spot overexposure, underexposure, and different luminance levels in dark areas.

■

Picture Display



The LV 7330 has a wide assortment of SDI signal picture display features including zoom, various safety markers, and brightness, contrast, and chroma adjustment. The LV 7330 also supports CEA/EIA-608 closed captioning and superimposition.

■

Video Signal Waveform Display

The LV 7330 uses fully digital waveform display processing to achieve high precision and quality. From video signal waveform display gain expansion, sweep expansion, and cursor measurement to pseudo-composite and RGB displays, the LV 7330 has all of the features that people look for in a waveform monitor. The LV 7330 is equipped with an external sync signal input and it can display video signal waveforms based on a tri-level sync signal or an NTSC or PAL black burst signal.

■

Vector Display

The LV 7330 can display component chrominance signal vectors. The amplitude can be manually zoomed, or set to a  xed magni cation value such as  ve. The IQ axes, which are useful for vector observation, can be turned on and off.

■

5 Bar Display

The LV 7330 can display the peak levels of the Y, R, G, B and pseudo-composite signals. This feature is useful for monitoring gamut errors.

■

Audio Display



The LV 7330 can extract the audio signal embedded in an SDI signal and display level meters, Lissajous curves, and surroundsound images for up to eight channels. The LV 7330 also supports external digital audio input, for which it can display a two-channel level meter and Lissajous curves. The level meter supports loudness metering and is useful for managing the volume level experienced by the listener. * The resolution of SD-SDI audio quantization is up to 20 bits.

■

Stereo Headphone Output

The LV 7330 can extract the audio signal embedded in an SDI signal. You can select two channels from the extracted audio and transmit them in stereo through the headphone output connector.

■

Status Display

The status display has a number of advanced features, including SDI signal error detection and analysis features.

■

Time Code Display

The LV 7330 can decode SMPTE 12M-2 time codes (LTC or VITC) and SMPTE 266M time codes (D-VITC) and display them. These codes can be used as timestamps in the event log.

■

Screen Capture

The display can be captured. Captured displays can be viewed or superimposed over an input signal. Captured displays can be saved in internal memory (RAM) or USB memory or sent to a PC through an Ethernet connection as bitmap data.

■

Presets Settings

The LV 7330 can remember up to 30 frequently used setting configurations. The configurations can be recalled easily from the front panel or using commands sent through the Ethernet or remote connector.

■

Remote Connector

You can recall presets by sending commands through the remote connector. Also, a tally light can be displayed on the screen.

■

Ethernet Connector

From a PC connected to the LV 7330 through the Ethernet connector, you can recall presets, execute panel operations, transfer  les, and monitor errors.

■

Last Memory

The LV 7330 backs up the current settings so that you can use the same settings that you were using before immediately after powering it up.

■

Power Supply

The LV 7330 has an XLR DC input connector and runs on a 12VDC power supply.

LV 7330

MULTI SDI RASTERIZER

Ⅱ

HD-SDI

SD-SDI

External Display

Supports aspect ratios of 4:3, 16:9, and 15:9.

■

Squeeze Feature

(SNMP will be supported in the future)

Page 25

SPECIFICATIONS



LV 7330

Video Signal Formats and Corresponding Standards

Single Link System Video

Color System

Y, C

, CR 4:2:2 10 bits

Quantization

Scanning Frame(Field) Rate 1080i 60/59.94/50 1080p 30/29.97/25/24/23.98

1080PsF 30/29.97/25/24/23.98

720p

525i 59.94 625i 50

Format

60/59.94/50/ 30/29.97/25/24/23.98

Corresponding Standards

SMPTE 274M SMPTE 292M

SMPTE RP211 SMPTE 292M

SMPTE 296M SMPTE 292M

SMPTE 259M

(only link A is supported for dual link)

Color System

GBR 4:4:4

, CR 4:2:2

Y, C

Quantization

Scanning Frame(Field) Frequency

1080p 30/29.97/25/24/23.98

10 bits

1080PsF 30/29.97/25/24/23.98 1080i 60/59.94/50 1080p 30/29.97/25/24/23.98

12 bits

1080PsF 30/29.97/25/24/23.98 1080i 60/59.94/50

10 bits 1080p 60/59.94/50

1080p 30/29.97/25/24/23.98

12 bits

1080PsF 30/29.97/25/24/23.98 1080i 60/59.94/50

Format

Corresponding Standard

SMPTE 372M (1920x1080)

Format Setting: Can be set automatically based on the

corresponding format or set manually (Set manually for dual link)

Supported Sampling Frequencies

: HD:74.25 MHz or 74.25/1.001 MHz

SD:13.5 MHz

External Sync: Automatically set from the corresponding

format

Audio Playback

Compliant Standard: HD:SMPTE-299M, SD:SMPTE-272M Sampling Frequency: 48 kHz (must be synchronized to the

video signal)

Quantization: HD:24 bits, SD:20 bits Synchronization: All audio channels must be synchronized

to the video clock.

Channel Separation: 2 groups of 8 channels are selectable.

Input/Output Connectors

SDI Input Input Connector: 2 BNC connectors (A/B switching) Input Impedance: 75 Ω Input Return Loss: ≥15 dB for 5 MHz to the serial clock fre-

quency

Maximum Input Voltage

: ±2V (DC + peak AC)

External Reference Input* Input Signal: Tri-level sync or NTSC/PAL black burst

signal

Input Connector: 1 pair of BNC connectors loop-through

* If the video signal waveform o r phase difference is display ed using an e xternal sync

signal as reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indenite.

AES/EBU Input Input Connector: 1 BNC connector Supported Formats: IEC 60958 Sampling Frequency: 48 kHz SDI Output Output Connector: 1 BNC connector

Reclocks and transmits the selected SDI

input signal

Output Impedance: 75 Ω Output Voltage: 800 mVp-p ± 10 % DVI-I Output Output Connector: 1 DVI-I connector Signal Format: Single Link T.M.D.S analog RGB Output Format: XGA (1024 x 768) Supports wide displays (using squeeze

methods)

DDC: Not Supported

HOT PLUG Detection

: Not Supported

Headphone Output Output Signal: The LV 7330 extracts and transmits the au-

dio signal embedded in an SDI signal.(Must be synchronized to the video signal.)

Output Connector: One 6.3-mm (1/4 in.) stereo jack Volume Adjustment: Congured in the menu Impedance: 32 Ω (16 to 600 Ω)

Control Connectors

USB Connector Function: Used to save screen captures, event

logs, preset data, and data dumps

Specications: USB 2.0 Media: Only USB memory devices are supported. Remote Connector Function: Used to recall presets, display a tally

light, and switch input channels (A/B)

Control Signal: TTL level (active-low logic) Control Connector: 15-pin D-sub (female) Ethernet (SNMP will be supported in the future) Function: Used to control the LV 7330 from a PC

and monitor errors and other events

Compliant Standard: IEEE802.3

Input/Output Connectors

: 1 RJ-45 connector

Type: 10Base-T/100Base-TX

(automatic switching)

Display Form

1 Screen Display: Picture display, CINELITE display, CIN-

EZONE display, video signal waveform display, vector display, status display, or audio display

2 Screen Display: Picture display and video signal wave-

form display Video signal waveform display and vector display Video signal waveform display and picture display Video signal waveform display and audio level display Audio waveform display and level meter display

4 Screen Display: Select audio level display or status dis-

play in addition to video signal waveform display, vectorscope display, and picture display

Format Display: Displays the video signal format at the

top of the screen.

Color System Display: Displays the video signal color system at

the top of the screen.

Date Display: Displays the date according to the inter-

nal clock at the top of the screen

Time or Time Code Display

: Displays the time according to the inter-

nal clock or a time code at the top of the screen

Time code: LTC, VITC, or D-VITC

Screen Capture

Function: Captures the screen Display: Displays the captured image or superim-

poses the captured image over the input signal

Media: Internal memory (RAM) and USB memory

Only one screen capture can be stored in the internal memory.

Data Output: Screen captures can be saved as bitmap

les or in a le format that the LV 7330 can load.

They can be saved to USB memory or

transmitted through an Ethernet and saved on a PC.

Data Input: Data saved to USB memory can be load-

ed and displayed on the LV 7330.

Presets Settings

Number of Presets: 30 Recall Method: Front panel or remote connector or Eth-

ernet command.

Copying: Preset congurations can be copied as a

group to or from USB memory.

Video Signal Waveform Display

Waveform Operations Display Modes Overlay: Overlays component signals. Parade: Displays component signals side by side.

Page 26

Timing: Computes and displays Y-CB and Y-CR.

Uses a bowtie signal.

Blanking Period: Show or hide RGB Conversion: Converts a Y,C

signal into an RGB

B,CR

signal and displays the result.

Pseudo-Composite Display

: Articially converts component signals into

composite signals and displays the result.

Channel Assignment

: In RGB conversion display, the order can

be set to GBR order or RGB order.

Line Select: Displays the selected line. Sweep Modes: H and V Vertical Axis Gain: ×1 or ×5 Variable Gain: ×0.2 to ×2.0 Amplitude Accuracy: ±0.5 % HD Frequency Characteristics Y Signal: ±0.5 % for 1 to 30 MHz C

Signals: ±0.5 % for 0.5 to 15 MHz

B,CR

Low-Pass Attenuation

: ≥ 20 dB (at 20 MHz)

SD Frequency Characteristics Y Signal: ±0.5 % for 1 to 5.75 MHz C

Signals: ±0.5 % for 0.5 to 2.75 MHz

B,CR

Low-Pass Attenuation

: ≥ 20 dB (at 3.8 MHz)

Horizontal Axis Line Display: ×1, ×10, ×20, ACTIVE, or BLANK Field Display: ×1, ×20, or ×40 Cursor Measurement Composition

Horizontal Cursors

: 2 (REF and DELTA)

Vertical Cursors: 2 (REF and DELTA)

Amplitude Measurement

: %, or V

Time Measurement: usec/msec Frequency Display: Computes and displays the frequency

with the length of one period set to the time between two cursors.

Scale Type: %, or V 75 % Marker: Displays where the location of the peak

of a 75 % color bar chrominance signal would be.

Display Colors: 7 colors to choose from

Vector Display

Gain: ×1, ×5, or IQ-MAG Variable Gain: ×0.2 to ×2.0 Amplitude Accuracy: ±0.5 % Blanking Period: Masked Scale Type: 75 % or 100 % (color bar) IQ Axis: Show or hide Display Colors: 7 colors to choose from Line Select: Displays the selected line Pseudo-Composite: Artificially converts component signals

into composite signals and displays the result.

5 Bar Display

Function: Displays ve peak levels: those of the Y, R,

G, B and composite signals.

Error Level: Based on gamut error level and compos-

ite gamut error level settings.

Filter: Removes transient errors

(The lter characteristics are the same as

for gamut errors.)

Line Select: Displays the selected line

Phase Difference Display

Display: Displays the phase difference between

an SDI signal and the external sync sig-

nal both numerically and graphically.

Display Range Vertical: ±1 eld (for interlace)

±1/2 frame (for progressive)

Horizontal*: ±1 line

* If the video signal waveform is displayed using an external sync signal as a reference,

the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indenite.

Picture Display

Image Quality Adjustment

: Brightness, contrast, chroma level, and

aperture

Display Sizes: FIT, ×1, or ×2 (HD)

FIT ×2 (SD)

Color Selection: Color or monochrome Frame Rate: The frame rate is converted and dis-

played using the internal sync signal.

Marker Displays Center Marker Aspect Markers HD: 4:3, 14:9, 13:9, 2.35:1, 1.85:1, and 1.66:1 SD: 16:9, 14:9, 13:9, 2.35:1, 1.85:1, and

1.66:1

Safe Action Markers: 95 %, 93 %, and 90 % Safe Title Markers: 88 % and 80 % Line Select: Marks the selected line

CINELITE Display

Function: f-Stop display, percentage display, and

level display

f-Stop Display: Displays the f value relative to the refer-

ence point

The reference point is set to the value of

an object with a reection level of 18 %.

f-Stop Gamma Correction Reference Gamma: 0.45 (ITU-R BT709)

User-Dened Correction Tables External Correction Tables

: 3 : 5 (read from USB memory)

Percentage Display: Displays luminance or RGB components

as percentages.

Level Display: Displays luminance or RGB components

with 256 levels (8 bits).

Measured points: 3 Measurement sizes: 1 pixel, 3 × 3 pixels, or 9 × 9 pixels

CINEZONE Display

Function: Displays the luminance levels in the pic-

ture using different colors

Display Colors: Linear (1024 colors) or step (12 colors) Upper Limit Setting: -6.3 to 109.4 % (values above the upper

limit are displayed using white)

Lower Limit Setting: -7.3 to 108.4 % (values below the lower

limit are displayed using black)

Level Search Display: Displays a specied luminance level ±0.5

% using green on an otherwise mono-

chrome picture display.

Luminance Level Setting

: -7.3 to 109.4 %

Embedded Audio Display

Lissajous Display Displayed Channels: 2 channels or 8 channels (only for em-

bedded audio)

Display Mode: X-Y or MATRIX Sound Image Display Channel Mapping: L, R, C, LFE, Ls(s), Rs, LL, RR Surround Formats: 3-1, 3-2, 3-2-2 Level Meter Display Displayed Channels: 8ch / 2ch Meter: 60 dB peak level, 90 dB peak level, aver-

age, or loudness

Peak Hold Time: 0.5 to 5.0 seconds/HOLD (when display-

ing the peak level)

Channels Group Selection: You can select any 2 groups from groups

1, 2, 3, and 4.

Audio Information: Detects the presence of each audio

channel

Sampling Frequency: 48 kHz (must be synchronized to the

video signal)

* The LV 7330 cannot display Lissajous curves, 8-channel level meters, or sound images

for AES/EBU signals that it receives.

Status Display

SDI Signal Error Detection Signal Detection: Detects the presence of an SDI signal TRS Error: Detects TRS location and protection bit

errors

Page 27

Line Number Error: Detects HD-SDI signal line number errors CRC Error: Detects HD-SDI signal transmission errors EDH Error: Detects SD-SDI signal transmission errors Gamut Error: Detects gamut errors

Detection Range Upper Limit Detection Range Lower Limit

Filter: Removes transient errors

Composite Gamut Error

Detection Range Upper Limit Detection Range Lower Limit

Filter: Removes transient errors

Parity Error: Detects ancillary data header parity errors Checksum Error: Detects ancillary data transmission errors BCH Error: Detects errors in the transmission of the

Audio CRC Error: Detects CRC errors in channel status bits

Audio Information Detection

Error Count: Up to 100,000 errors

Count Period: Only one error is counted for each sec-

Event Log Display Recording Capacity: Up to 1,000 events Description: Records all events from start to nish Recorded Events: Errors, changes in input type, time stamps,

Data Output: Event logs can be saved to USB memory

Data Dump Display Display Modes: Display data separated by serial data se-

Line Select: Displays the selected line Sample Select: Displays from the selected sample Jump Feature: Jumps to an EAV or SAV Data Output: Event logs can be saved to USB memory

Audio Status Display Control Packets: Analyzes and displays SDI signal audio

: 90.8 to 109.4 % (0.1 % step) : -7.2 to 6.1 % (0.1 % step)

Low-pass (HD: 5 MHz LPF. SD: 1.8 MHz LPF)

: Detects level errors that occur when com-

ponent signals are converted to composite signals

: 90.0 to 135.0 % (0.1 % step) : -40.0 to -20.0 % (0.1 % step)

Low-Pass (HD: 5 MHz. SD: 1.8 MHz)

audio signal embedded in an HD-SDI signal

: Detects the presence of each audio

channel

(Only the specied errors are counted.)

ond or frame.

etc.

or sent to a PC through an Ethernet connection as text data.

quence or by channel

or sent to a PC through an Ethernet connection as text data.

control packets

Channel Status: Analyzes and displays or displays the

dump of the channel status of the embedded audio signal

EDH Display EDH packets: Analyzes and displays received EDH

packets

Closed Caption Display Compliant Standard: ARIB STD-B37/CEA-608, ELA-708 Display Details: Analyzes and displays the closed caption

signal.

Inter-Stationary Control Data Display (NET-Q) Compliant Standard: ARIB STD-B39 Display Details: Analyzes and displays inter-stationary

control data

Data Broadcast Trigger Signal Display

Compliant Standard

 

V-ANC User Data Display

Standard Supported

Time Code Display

Corresponding Time Code

Display Method: Switches the display of internal clock,

Front Panel

Key LEDs: You can dimly light all of the keys by

Power Switch: Turns the power on and off. If power

Last Memory: Backs up the panel settings.

Environmental Conditions

Operating Temperature

Operating Humidity: 85 %RH or less (no condensation)

Power Supply

Voltage: 10 to 18 VDC Power Consumption: 18 W max.

Dimensions

Weight

Accessories

: ARIB STD-B35

: ARIB TR-B23

: Selects LTC or VITC SMPTE RP-188

and the time code.

pressing the shortcut key.

is removed when the switch is on, the instrument will turn on when power is restored.

: 0 to 40°C

215(W) × 44(H) × 250(D) mm (excluding protruding parts)

1.3 kg

Instruction manual ................................. 1

AC adapter (LP 1960) ............................ 1

15-pin D-sub connector ........................ 1

15-pin D-sub connector cover ............. 1

Ferrite core ............................................ 1

■LV 7330 Front Panel ■LV 7330 Rear Panel

215 mm

250 mm

44 mm

■Rack Mounting

LR 2481 Rack Mount Adapter (sold separately)

Page 28

LV 5152

■LV 5152 REAR PANEL

Displays Analog Component Signals of Multi-Format DTV Monitoring with Conversion Matrix (Y, P

, PR, to GBR)

MULTI FORMAT WAVEFORM MONITOR

The cabinet is sold separately.

The LV 5152 Multi-format Waveform Monitor is designed to display analog component signals of multi-format DTV. This instrument features two analog component signal input systems. In addition to the waveform monitor function, vector, timing, and audio signal display functions are provided. Moreover, the full line selector function and control setting menu are provided.

FEATURES

•

Comply DTV for U.S.A. and Europe

Accepts eight analog video formats for DTV-USA and three analog video formats for DTV-Europe.

•

Two analog signal input systems (Y, P

B, PR or GBR) are

provided.

•

Picture monitor output is provided.

•

Vectorscope function (SMPTE 274M, 296M)

Displays color difference signal of component signals in vector format. The analog GBR signal is converted into color difference signal with a matrix and displayed in vector format.

•

Conversion matrix, Y, P

B, PR into GBR (SMPTE 274M,

296M)

Simplifies signal level monitoring.

•

Measurements using cursor

Ensures level measurement with 0.5% accuracy.

•

Preset memory function

Stores/recalls up to 10 panel settings to reduce setup time by presetting frequently used measurement conditions.

•

Basic Operation Mode WFM(Waveform monitor mode)

Displays up to three channel waveforms.

VEC(Vectorscope mode)

Vector display of P

B and PR channel input signals.

PIC(Picture monitor mode)

Monochrome display of Y/G channel input signals.

AUDIO(Audio mode)

Lissajous display of analog stereo audio signal.

Page 29

LV 5152 SPECIFICATIONS

Measurement Signal and Standards

Input System

Signal Input

Input Channel Input Connector Retaurn Loss Impedance Maximum Input Voltage

EXT REF Input

Input Channel Input Connector Return Loss Impedance

Maximum Input Voltage Sync Amplitude Picture Monitor Output

Frequency Response Output Impedance Output Connector Amplitude

Vertical Axis

Deflection System

Deflection Sensitivity

Variable Range

GBR Matrix

Deflection Sensitivity

Frequency Response

FLAT

LOWPASS

Attenuation

DIF'D STEP

Attenuation

Step Response

DC Restorer

Frequency Response

Slow Mode

Fast Mode

Clamp

Point

Variable Range

Blanking Level Shift Horizontal Axis

Operation Mode

Display Method

Line:

Line Magnified

Field:

Field Magnified

Time Base Accuracy Linearity

Vectorscope Mode

Frequency Range Amplitude Accuracy

CH1(Y/G),CH2(P

B/B),CH3(P

R/R),2-system

BNC ≥ 30 dB, 50 kHz to 30 MHz (both power on/off) 75 Ω passive loop-through ±2 V (DC + peak AC)

EXT REF, 1-system BNC ≥ 30 dB, 50 kHz to 30 MHz (both power on/off) 75 Ω passive loop-through ±12 V (DC + peak AC)

0.3 Vp-p ±6 dB

25 Hz to 30 MHz, within ± 5 % 75 Ω BNC, 1 system 1 V ± 5 %

Within ± 1 %, GAIN x 1 Within ± 3 %, GAIN x 5 At least 0.5 to 1.2 times (both GAIN x 1 / x 5)

Within ± 1 %, GAIN x 1 Within ± 3 %, GAIN x 5 x 1 GAIN Within ± 1 %, 25 Hz to 30 MHz (50 kHz ref., GBR Matrix OFF mode)

≥ 20 dB, at 20 MHz (50 kHz ref.)

≥ 20 dB, at 30 kHz (1.6 MHz ref.) ≥ 20 dB, at 7 MHz (1.6 MHz ref.)

For 2T pulse, 2T bar Within ± 1 %, pulse/bar ratio Within ± 1 %, overshoot Within ± 1 %, preshoot Within ± 1 %, ringing Within ± 1 %, sag (vertical tilt)

≤20 %, attenuation at 60 Hz input ≥80 %, attenuation at 60 Hz input

Back porch

0.5 to 2 µs, relative to sync pulse raising edge ≤1 % (10 to 90 % of APL Variation)

Overlay: Displays waveforms overlaid Parade: Displays waveforms side by side Timing: For bowtie signal* measurement * Authorized by Tektronix, Inc.

1H, 2H, 3H 1H MAG, 2H MAG, 3H MAG 1V, 2V, 3V 1V MAG, 2V MAG, 3V MAG Within ±3 % (0.1 µs/ div) Within ±3 %

≥ 1 MHz ±2 % (Y, P

B, PR Input)

±2 % (G, B, R Input)

Variable Range

Graticule Sync Blanking

Picture Monitor Mode

Audio Mode

Calibration Accuracy Full Scale Bandwidth

X-Y Phase Accuracy Calibration Signal Line Selector

Operation Mode

Operation Field

Display Line Window

Function

Window Range

Operation Mode

Operation Field Preset Function

Preset/ Recall

Controls

Remote Control

Control Signal

Control Input Cursor Measurement

Configuration

Amplitude Measurement

Measurement Range Accuracy Resolution

Amplitude Ratio Measurement

Time Measurement

Measurement Range Accuracy Resolution

Time Ratio Measurement

Frequency Measurement

CRT

Effective Display Area

Graticule

Environmental Conditions

Operating Temperature

Operating Humidity

Operating Environment

Operating Altitude

Overvoltage Category

Pollution Degree Power Requirements Dimensions and Weight

Accessories

Optional Accessories

At least 0.5 to 1.2 times (both GAIN x1 / x5) (for vertical and horizontal axes) Electronic graticule Blanks sync dot

Displays picture using the Y or G signal. The picture is horizontally reduced in size because the CRT aspect ratio is not 16:9.

±0.5 dB of full sale 0, 2, 4 dBm (menu selectable) Within –3 dB at 20 kHz Within 1 ˚ at 20 kHz

1 V ±0.5 %

WFM, VEC, PIC FLD1, FLD2, ALL (at Interlace) Only ALL at 1080/50i (1250Line). The selected line is intensified

Displays brighter by overlaying multiple lines resulting in higher effective refresh rate. 1 to 15 lines WFM, VEC, PIC FLD1, FLD2, ALL (at Interlace)

Up to 10 front panel controls All front panel controls (except INTEN, READOUT INTEN, ROTATION, FOCUS, ILLUM, POWER)

TTL (low active) D-sub, 25-pin (REMOTE), rear panel

Two horizontal cursors (REF, ∆) Two vertical cursors (REF, ∆) Voltage (V or %) between the REF and ∆ cursors 0 to 2000 mV, 0 to 280.0 % ±0.5 % 1 mV or 0.1 % Amplitude between the REF and ∆ cursors relative to 100 % REF is displayed in R%. Measures time between the REF and ∆ cursors At least ±6 div from graticule center ±3 % 1/ 80 div When [ R% ] is selected with the menu, time between the REF and ∆ cursors relative to 100 % REF is displayed in R%. Frequency of one cycle between the REF and ∆ cursors

80 x 100 mm Internal (waveform) External (vector) Electronically-generated (vector, audio)

0 to 40 ˚C ≤ 90 % RH (without condensation) Indoor use up to 2000 m II 2

90 to 250 VAC, 48 to 440 Hz, 60 W max. 215 (W) x 132 (H) x 429 (D) mm, 5.5 kg

8 1/2(W) x 5 1/4(H) x 16 3/4(D) in., 12.1 lbs

Illumination lamp...............................................5

25-pin D-sub connector....................................1

25-pin D-sub connector cover..........................1

Screw, rack mounting (inch size) .....................2

Cover, inlet stopper ..........................................1

Power cord .......................................................1

Instruction manual ............................................1

LR 2427B (Cabinet, with handle) LR 2404A (Cabinet, without handle) LR 2700A-I (Rack-Mount Adapter, inch size)

No Format

FullLine/Flame Frequency

Complied Spec. 1 1080/60i 1125/29.97(30) SMTPE 274M 2 1080/50i 1125/25 SMTPE 274M 3 1080/24P 1125/23.98(24) SMTPE 274M 4 1080/24sF 1125/23.98(24) SMTPE 274M 5 720/60P 750/59.94(60) SMPTE 296M 6 720/50P 750/25 SMPTE 296M 7 480/60P 525/59.94(60) SMPTE 293M 8 480/60i 525/59.97(30) SMPTE 253M 9 1080/50i 1250/25 SMTPE 295M

10 576/50P 625/50 ITU-R BT.1358 11 576/50i 625/25 ITU-R BT.601-4

Page 30

WAVEFORM MONITOR

5222

The Model 5222 is a precision Waveform Monitor designed to monitor video signals. The 5222 with its bright CRT adds such extra features to conventional waveform monitors as a line selector, picture monitor mode, X-Y display mode for stereo audio signals, and menu screen for setting functions. These instruments have eight video inputs and one external reference input channel. Up to four waveforms, component or composite signals, and the external reference can be displayed side-by-side to reduce system size. These instruments can also be remotely controlled when combined with the 5212 Vectorscope.

Precise Video Signal Level Measurements with Cursor Provides Full Component Monitoring Capability

PAT. PEND. The cabinet is sold separately.

•

Eight video inputs and one external reference input channel

These instruments have eight video inputs and one external reference input channel. Up to four waveforms, including the external reference, can, be displayed simultaneously. The parade (side-by-side) or ALT (overlaid) display is selectable. The component signal can be displayed in the bowtie configuration. (Bowtie signal: U.S. PATENT 4,829,366 is used with permission of Tektronix, Inc.)

•

Menu function

For user-friendly front panel control, a menu controller is provided for various functions.

•

Dual filter

Both FLAT and LUM (low-pass filter) filtered characteristics can be displayed simultaneously.

•

Preset function

The front panel settings, including vertical and horizontal positioning, can be stored in memory, and recalled from the front panel or via the remote control connector on the rear panel. You can reduce setup time by presetting frequently used measuring conditions.

•

Clamp position setting

The clamp point can be set at any position, with the position being highlighted on the waveform.

•

RGB/YRGB display function

•

Y/C input connectors

•

Bright CRT, accelerating potential of 16.5 kV

•

Universal AC power supply, 90 to 250 V

FEATURES

•

Precise measurements with cursor

The cursor permits signal level measurements with 0.5% accuracy.

•

Full line selector

Since one or two lines of a video signal can be displayed, you can conveniently observe VITS, VIR, or teletext signals. The function also helps to test video camera characteristics.

•

Picture display function

These instruments can display video signals as a TV picture even without a picture monitor. In the line selector mode, the selected line is highlighted for identification on the picture.

Page 31

5222 SPECIFICATIONS

CRT

Type Accelerating Potential Effective Display Area Graticule

Input

Input Channel

Input Impedance Maximum Input Voltage Return Loss Isolation between Channels Gain Difference Between Channels

Loop Through Isolation Measurement Signal Vertical Axis

Deflection Factor

Variable Range

Filter

FLAT

LUM

Attenuation CHROMA Band-Pass Filter

Bandwidth

Bandwidth error

Amplitude error DIF'D STEP

Gain

Attenuation

Attenuation Step Response

Overshoot

Preshoot

Ringing

Pulse/Bar Ratio

Vertical Tilt DG

DC Restoration

Frequency Response

Slow Mode

Fast Mode

Clamp Point

Variable Range

Blanking Level Shift

Video Output

Frequency Response Input /Output Gain Ratio Return Loss DG, DP

Horizontal Axis

Time Accuracy

Sweep Length Linearity Position Control Range

RGB/YRGB

Selectable Staircase Input Maximum Input Voltage

CAL

Amplitude

EXT REF

Input Impedance Return Loss Maximum Input Voltage

150 mm rectangular (P4)

16.5 kV 100 (H)×80 (V) mm

Illuminated internal graticule

(625) (525)

CHA: 1, 2, 3, 4 CH1, 2, 3 CHB: 1, 2, 3, 4 ≥15 kΩ, 75 Ω loop-through ±2 V (DC+peak AC)

≥40 dB, 50 kHz to 6 MHz ≥60 dB, (Fsc)

≤0.5% CH1 to CH4 ≥70 dB (Fsc)

NTSC/PAL/SECAM video signal (625/50)

±1%: 1 Vp-p full scale (140 IRE ref) ±3%: ×5

±0.5%: Cursor measurement

0.5 Vp-p to 1.45 Vp-p: ×1 full scale

0.1 Vp-p to 0.29 Vp-p: ×5

Within ±2% (25 Hz to 6 MHz) Within+2 to

−

5% (6 MHz to 8 MHz)

(50 kHz ref.)

≥35 dB (Fsc)

(625) (525)

Fac ±2.4 MHz Fac ±2.2 MHz

2.4 MHz ±200 kHz 2.2 MHz ±200 kHz ≤1% (Fsc) 400 kHz band-pass filter

5 ±10% (FLAT ref.)

≥20 dB (14 kHz, 2 MHz) 400 kHz ref. ≥40 dB (Fsc) 400 kHz ref.

For 1 V full scale, FLAT, 2T pulse, 2T bar ±2% or less ±1% or less ±2% or less Within ±1% (0.99: 1 to 1.01: 1) Within 1%

≤1%

≤20% (absolute attenuation value for 60 Hz

input) ≥80% (absolute attenuation value for 60 Hz input) Back porch 5 to 7 µs or more (with respect to sync pulse leading edge) ≤1% (With 10 to 90% APL or color burst on/off)

Within ±3% (25 Hz to 6 MHz)

1.1 ±3% (75 Ω term.)

≥30 dB (50 kHz to 6 MHz) ≤1%, ≤1°

Within ±3% (1 µs/div) Within ±3% (0.2 µs/div)

12.5 div ±0.7 div Within ±3% Anywhere in the screen

Factory setting: RGB 10 V ±15%, 9 divisions display ±12 V (DC+peak AC)

1 V ±0.5%

≥15 kΩ, 75 Ω loop-through ≥40 dB (50 kHz to 6 MHz)

±12 V (DC+peak AC)

Synchronization

Sync Amplitude

INT EXT

Remote Sync Sensitivity

Line Selector

Field 1, 3 Field 2, 4 ALL

Preset Function

Controllable Functions

Remote Control

Combinations Controllable Functions

Control Input

Cursors

Configuration

Amplitude Measurement

Measurement Range

Calibration Accuracy Resolution

Time Measurement

Measurement Range Calibration Accuracy Resolution

Frequency Measurement

Environmental Conditions

Operating

Spec-Guaranteed

Power Requirements

Power Consumption

Dimensions and Weight

Supplied Accessories

Optional Accessories

5222: CH1A, 4A, 1B, 4B

(625) (525)

0.3 Vp-p ±6 dB 0.286 Vp-p ±6 dB

0.3 Vp-p ±6 dB 0.286 Vp-p ±6 dB 143 mV to 4 V composite sync amplitude

2.0 to 5.0 V square wave or 4.0 V composite sync (activates at sync leading edge)

(625) (525)

Line 1 to 313 Line 1 to 263 Line 314 to 625 Line 1 to 262 Line 1 to 312 Line 1 to 262

Up to 10 panel settings, Recallable All front panel controls (except REMOTE, INTEN, ROTATION, FOCUS, GAIN VAR, POWER)

5222 → 5212 (NTSC/PAL/SECAM) All front panel controls (except INTEN, ROTATION, FOCUS, GAIN VAR, POWER) Rear panel D-sub, 15-pin (REMOTE A) D-sub, 9-pin (REMOTE B)

Horizontal cursors (REF, ∆) Vertical cursors (REF, ∆) Voltage between the REF and ∆ cursors Unit: V, IRE, %

(625) (525)

0 to 2000.0 mV 0 to 2000.0 mV 0 to 286.0% 0 to 280.0 IRE

0.5%, vertical

0.5 mV, 0.1 IRE, or 0.1% Time between the REF and ∆ cursors ±6 div or more from center ±3% 1/80 div Frequency between the REF and ∆ cursors those apart 1 cycle

Temperature: 0 to 40°C Humidity: ≤ 90% RH (without condensation) Temperature: 10 to 35°C Humidity: ≤ 80% RH (without condensation)

90 to 250 VAC, 48 to 440 Hz 50 Wmax.

215 (W)×132 (H)×429 (D) mm, 4.2 kg 8 1/2 (W)×5 1/4 (H)×16 3/4 (D) in., 9.3 lbs

Illumination lamp

Screw, rack mounting (inch size)

15-pin D-sub connector

Metal case, 15-pin D-sub connector

Power cord

Cover, inlet stopper

Screw lock

E-ring

Instruction manual

LR 2427B (Cabinet, with handle) LR 2404A (Cabinet, without handle) LR 2700A-I (Rack-Mount Adapter, inch size)

■5222 REAR PANEL

Page 32

WAVEFORM MONITOR

5861V

(PAL) 5860V(NTSC)

The 5861V and 5860V Waveform Monitors are oscilloscopes that are capable of quick monitoring amplitude, time and frequency response, etc. of composite TV signals, which are hard for ordinary oscilloscopes to measure. The waveform monitor is equipped with various modes and trigger functions that are optimum to video signal monitoring. Such various modes as 2H, 1H, 1 µs/div, 2V, 1V, and 2V MAG can be selected by the horizontal axis sweep. As FLAT, LUM (5861V), IRE (5860V), CHROMA, DIF GAIN and DIF'D STEP can be switched, it is possible to observe various characteristics of video signals. Furthermore, the line selector function is provided for observing VITS and VIR signals which are inserted during the vertical blanking period. In addition, the blanking output connector for blanking other periods that lines selected by the line selector, video output connector and other functions necessary for video signal monitoring are provided.

FEATURES

•Depending on synchronization system and subcarrier frequency, the 5860V is compatible with the M system, and 5861V is compatible with the B, C, D, G, H, I, and K systems.

•Differentiated-step methods are used to display the differential of staircase signals to make measuring the linearity of transmission system luminance components easier.

•Built-in line selector function for monitoring VITS and VIR signals, a blanking output and a video output.

•Horizontal sweep mode selection from 2H, 1H, 1 µs/div, 2V, 1V, and 2V MAG. The frequency response of the vertical axis is switchable among FLAT, LUM (5861V), IRE (5860V), CHROMA, DIF GAIN, and DIF'D STEP.

•K factor scale provided for checking of frequency characteristics.

■5860V FRONT PANEL

■5861V REAR PANEL

Measurements of Composite Video Signal Amplitude, Timing, and Frequency Response

5860V

5861V

(5861V only)

Page 33

5861V

(PAL)

5860V

(NTSC)

SPECIFICATIONS

■5861V WAVEFORMS DISPLAY

Model

CRT

Type

Accelerating Potential Effective Display Area Beam Rotator

Input Section

Input Connector

Input Impedance

Maximum Input

Full Scale Graticule

Full Scale SYNC VIDEO

Deflection Accuracy

1 V Full-scale Range

4 V Full-scale Range

Frequency Characteristics

FLAT

LUM

IRE

CHROMA

DIF GAIN

DIF'D STEP

Transient Response

Sag (Vertical window signal) Variable Range

1 V Full-scale Range 4 V Full-scale Range DC Regeneration

5861V 5860V

150 mm rectangular, internal graticule with scale illumination 12 kV 80 (V)×100 (H) mm Adjustable from the front panel

A and B on the rear panel (loop-through, BNC connector) 1 Vp-p full scale range: 15 kΩ, 50 pF 4 Vp-p full scale range: 60 kΩ, 50 pF

±5 V (DC+peak AC), AC coupled

1.0 scale

0.3 scale

0.7 scale

Within ±2% of 1.0 scale at 1 V input Within ±4% of 1.0 scale at 4 V input

25 Hz to 3.6 MHz ±2%, 3.6 MHz to 5 MHz+2%,

−

5% at 50 kHz reference More than 35 dB of attenuation at 4.43 Mz

4.43 MHz bandpass filter Response: Within ±2% at filter FLAT

4.43 MHz bandpass filter 3 to 5.5 times of CHROMA amplitude For measuring the linearity of luminance

450 kHz bandpass filter

Response at filter "FLAT"

400 kHz: Within ±2% 500 kHz: Within +0,

−

20%

14 kHz, 2 MHz: Within

−

90%

3.58 MHz (5861V), 4.43 MHz (5860V):

−

99% ±1.5% or less in overshoot, preshoot, and ringing using the sin

pulse & bar signal at FLAT with 1 V full scale range. 2% or less Input voltage of 1.0 full scale

0.25 V or less to 1 V 1 V or less to 4 V Clamped at the back porch

Model

Video Output

Output Connector Output Voltage Output Impedance Frequency Characteristics

Sweep

1H Sweep 2H Sweep 1 µs/div 1V Sweep 2V Sweep 2V MAG Sweep Linearity RGB/YRGB Display Staircase Maximum Input Voltage Sweep

Sweep Line Length

Composite to YRGB

Control Signal Control Signal RGB and YRGB Input

External Synchronization

Input Connector Input Impedance Input Sensitivity

Maximum Input Voltage

Line Selector

Display Line

Blanking Output

Output Connector Voltage Level

Calibrator

Waveform Amplitude Frequency

Environmental Conditions

Operating Power Requirements Dimensions and Weight

Accessories

5861V 5860V

BNC connector on the rear panel 1 V ±15% at full scale input 75 Ω ±10% 25 Hz to 5 MHz ±5%

Display of 1H waveform Display of 2H waveform 10 times magnification of 2H sweep, 1 µs/div ±3% Display of 1 V waveform Display of 2 V waveform Approx. 20 times magnification of 2V sweep ±3% RGB is standard. (YRGB is optional.) 10 V ±15%/9 div ±12 V (DC+peak AC) 1H display at 2H sweep 1V display at 2V sweep RGB: 30%×3 or composite display YRGB: 22%×4 of composite display Remote control from external or internal control signal 12 to 15 V (negative or positive), 15 mA 9-pin MT socket on the rear panel 9-pin D-sub connector (option)

2 terminals, BNC, loop-through type on the rear panel 15 kΩ

0.143 to 5 Vp-p (Level of sync signal in composite video signal) ±8 Vp-p

13 to 22 and 325 to

14 to 21 lines of first and

334 lines

second fields

BNC connector on the rear panel 0 V: selected by line selector

−

2 V: for other duration

Square waveform 1 Vp-p ±1% 32 kHz

Temperature: 0 to 40°C 100, 120, 200, 240 VAC, 50/60 Hz, 50 Wmax. 215 (W)×132 (H)×429 (D) mm, 7.4 kg 8 1/2 (W)×5 1/4 (H)×16 3/4 (D) in., 16.3 lbs Scale illumination lamp

9-pin MT plug

Cover/lnlet stopper

Screw, rack mounting(inch size)

Power cord

Instruction manual

140 IRE 40 IRE 100 IRE

Within ±2% of 140 IRE at 1 V input Within ±4% of 140 IRE at 4 V input

Conforms to IRE STD23S-1 (1958); more than 22 dB of attenuation at 4.43 MHz

3.58 MHz bandpass filter

±2 IRE or less in overshoot, preshoot, and ringing using the sin

pulse & bar signal at FLAT with 1 V full scale range.

Input voltage of 140 IRE full scale

•Sweep Range

•Frequency Response Range

FLAT LUM CHROMA DIF GAIN DIF'D STEP

1 µs/div 2V 2V MAG

Page 34

VECTOR SCOPE

5212

The Model 5212 is precision Vectorscope designed to monitor video signals. The 5212 with its bright CRT features a vector display, DG/DP function to measure differential gain and differential phase with a line display, X-Y display mode for stereo audio signals, and menu screen for setting functions. These instruments have three video inputs and one external reference input channel. Up to four waveforms, including the external reference, can be displayed. The newly developed digital phase control ensures a phase measurement accuracy of within 1%. These instruments can also be remotely controlled when combined with the 5222 Waveform Monitor.

Precise DG/DP Measurements with CRT Readout Three Video Inputs, One External Reference Input X-Y Display Capability, Auto Phase & Mag Burst

PAT. PEND. The cabinet is sold separately.

•

X-Y display function

The level and phase of stereo audio signals can be measured.

•

Menu function

For user-friendly front panel control, a menu controller is provided for various functions.

•

Preset function

The front panel settings, including vertical and horizontal positioning, can be stored in memory, and recalled from the front panel or via the remote control connector on the rear panel. Yon can reduce setup time by presetting frequently used measuring conditions.

•

Automatic NTSC/PAL system discriminator

The 5212 automatically selects the NTSC or PAL color system.

•

Y/C input

The C signal vector can be displayed by respectively applying the Y signal and C-signal to the CH1 and CH2 input connectors.

•

Remote control

These instruments can also be remotely controlled when combined with the 5222 Waveform Monitor. The line selected by the waveform monitor is displayed automatically.

•

Bright CRT, accelerating potential of 16.5 kV

•

Universal AC power supply, 90 to 250 V

FEATURES

•

Three video inputs and one external referenceinput channel

Up to four waveforms, including the external reference, can be displayed simultaneously.

•

Digital phase control

The newly developed digital phase control ensures a phase measurement accuracy of within 1% and display resolution of within 0.1° with alphanumeric readout.

•

DG/DP measuring function

These instruments enable accurate measurement of differential gain (DG) and differential phase (DP) with alphanumeric readout.

Page 35

5212 SPECIFICATIONS

CRT

Type Accelerating Potential Effective Display Area Graticule

Input

Input Channel Input Impedance Maximum Input Voltage Return Loss Isolation Between Channels Gain Difference Between Channels Phase Difference Between Channels Loop-Through Isolation

Synchronization

Sync Amplitude

CH1, 2, 3

Video Signal

EXT

Video Signal

Subcarrier Signal Selection

Vector Mode

Bandwidth

Upper -3 dB Point Lower -3 dB Point Center Frequency (Fsc)

Display

Phase Accuracy

Amplitude Accuracy

Digital Phase Control

Phase Accuracy

Subcarrier Regeneration

Pull-In Range Pull-In Time Phase Control Range Phase Shift Phase Shift Burst Jitter

Position Variable Range

Vertical Position Horizontal Position

DG/DP Mode

Measurement Accuracy

DG DP

Position Control Range

Vertical Position Horizontal Position

Auto Setup

DG Setup Accuracy DP Setup Accuracy

X-Y Mode

Input

Input Impedance Calibration Accuracy Input Amplitude

Maximum Input Voltage Frequency Response X-Y Phase Difference Input Connector V Position Control Range H Position Control Range

150 mm rectangular (P4)

16.5 kV 100 (H)×80 (V) mm

Illuminated internal graticule

CH1, CH2, CH3, EXT ≥15 kΩ, 75 Ω loop-through ±12 V (DC+peak AC)

≥40 dB (50 kHz to 6 MHz) ≥70 dB (Fsc) ≤±0.5% ≤±0.5% (Fsc) ≥70 dB (Fsc)

PAL NTSC

Burst, sync amplitude Burst, sync amplitude

0.3 Vp-p ±6 dB 0.286 Vp-p ±6 dB

Burst, sync amplitude Burst, sync amplitude

0.3 Vp-p ±6 dB 0.286 Vp-p ±6 dB 2 Vp-p ±6 dB Video or subcarrier, selectable

PAL NTSC

Fsc+500 kHz ±100 kHz Fsc+500 kHz ±100 kHz Fsc−500 kHz ±100 kHz Fsc−500 kHz ±100 kHz

4.43361875 MHz 3.579545 MHz Color bars 75%, 100% MAG mode setting OFF: Within ±1° BURST: Within ±2°

5 MAG: Within ±2° OFF: Within ±3% BURST: Within ±3%

5 MAG: Within ±5%

Within ±0.5°

Within ±150 Hz Within 1 sec 360° Within ±2° (Fsc ±50 Hz) Within ±2° (Burst amplitude ±6 dB) ≤±0.5°

At least ±8 mm from center At least ±8 mm from center

Within ±0.5% Within ±0.5°

±40 mm ±4 mm from center At least ±8 mm from center At CAL position Within ±2% Within ±2°

DC-coupled differential inputs (Balanced input) ≥20 kΩ Within ±3% 0 dBm to 12 dBm (600 Ω) (0.775 V to 3.1 Vrms) ±12 V (DC+peak AC) DC to 20 kHz, ≤3 dB ≤1° (20 kHz) 15-Pin D-sub connector (rear panel) At least ±8 mm from center At least ±8 mm from center

GAIN

GAIN Variable Range Phase Shift by GAIN

Auto Phase

Accuracy

REF SET

VECT Mode DG Mode DP Mode

Preset Function

Controllable Functions

Remote Control

Combinations Line Selection

Recall Function Controllable Functions Control Signal Input Connector

CRT Readout

Color System Phase

Display Resolution NTSC Setup REF Channel DG

Display Resolution DP

Display Resolution X-Y Display Recall Mode Y/C Display

Environmental Conditions

Operating

Spec-Guaranteed

Power Requirements

Power Consumption

Dimensions and Weight

Supplied Accessories

Optional Accessories

+3 dB to

−

14 dB or more

Within ±1° (+3 dB to

−

6 dB)

Burst phase is set to-(B-Y) axis. Within ±2°

PHASE display is set to 0.0° DG display is set to 0.00% DP display is set to 0.00°

Up to 10 panel settings All front panel controls (except INTEN, FOCUS. ROTATION, ILLUM, GAIN, VAR, POWER), and Menu (SYSTEM, DISPLAY)

5222 → 5212 (NTSC/PAL) Full line selection capability Window display capability Available INPUT, REF, Y/C, RECALL TTL, low active D-sub, 9-pin (rear panel)

NTSC/PAL (SYNC ABSENT)

0.0° to 359.9°

0.1° SETUP 7.5%/SETUP 0% CH1, CH2, CH3, EXT +10.00% to

−

10.00% (DG mode)

0.01% +10.00° to

−

10.00° (DP mode)

0.01° X-Y scale is displayed (X-Y mode). Address to be recalled Y/C is displayed (Y/C mode).

Temperature: 0 to 40°C Humidity: ≤ 90% RH (without condensation) Temperature: 10 to 35°C Humidity: ≤ 80% RH (without condensation)

90 to 250 VAC, 48 to 440 Hz 55 Wmax.

215 (W)×132 (H)×429 (D) mm, 4 kg 8 1/2 (W)×5 1/4 (H)×16 3/4 (D) in., 8.8 lbs

Illumination lamp

Screw, rack mounting (inch size)

15-pin D-sub connector

Metal case, 15-pin D-sub connector

9-pin to 9-pin D-sub connector cable

Power cord

Cover, inlet stopper

Screw lock

E-ring

Instruction manual

LR 2427B (Cabinet, with handle) LR 2404A (Cabinet, without handle) LR 2700A-I (Rack-Mount Adapter, inch size)

■5212 REAR PANEL

Page 36

VECTOR SCOPE

5850V

(NTSC)

The 5850V Vectorscope is designed to simultaneously measure the amplitude and phase of chrominance components contained in a composite video signal. To measure phase (i.e., direction with respect to burst signal) and amplitude (i.e., length from center) in vector format, the chrominance components containing color information of the video signal are first demodulated, then displayed on the CRT. VITS and VTR can also be displayed in vector format by applying blanking signal output from the waveform monitor to Z INPUT of the vectorscope.

FEATUREFS

•The 150 mm rectangular CRT with internal graticule (with the scale illumination), it is possible to measure without parallax reading error.

•DP and DG measurements enable using the modulated staircase.

•Use with a waveform monitor to observe the vector VITS and VIR signals.

•The optional rackmount adapter enables a pattern generator, color monitor, and vectorscope to be integrated in a system.

■5850V REAR PANEL

Vector Display for Composite Video Signal

Page 37

5850V

(NTSC)

SPECIFICATIONS

■THE ANGLES FOR EACH HUE 5850V

CRT

Type

Accelerating Potential Effective Display Area Beam Rotator Graticule

Composite Video Signal Input

Input

Input Impedance Max. Input Voltage Sensitvity

Calibrated Value

EXT REF

Blanking Input

Sensitivity Polarity

Chrominance

Bandwidth

Phase Accuracy Amplitude Accuracy Differential Phase Differential Gain

Measurement Item

Vector Measurement

150 mm rectangular, internal graticule with scale illumination 12 kV 80 (V)×100 (H) mm Adjustable from the front panel Internal scale Allowable frame: ±20%/ ±10° of standard color bar, circle, angle, R-Y axis, B-Y axis, I axis, Q axis, DG and DP, ±2.5 IRE/±2.5° of standard color bar, and ±20 %/ ±10° of burst signal

A, B and EXT REF on the rear panel (loop-through, BNC connector) A, B: 2 MΩ, EXT REF: 10 kΩ

±5 V (DC+peak AC)

Color Saturation: 75%, 100%, full scale Amplitude: 1 Vp-p, 1.24 Vp-p Variable Range: 0.5 to 5 times of the calibrated value Subcarrier: 2 Vp-p ±6 dB Black Burst: 0.43 Vp-p ±6 dB

DC ±1 V Brightens With positive voltage

Center: Fsc=3.579545 MHz High Freq.=Fsc +500 kHz Low Freq.=Fsc -500 kHz ±2° ±3% ±1° ±1%

Phase and amplitudeofchrominance component in 75% or 100% saturation color bar signal

Horizontal Synchronization

Input

Sync Polarity Sync Level Range

Subcarrier Signal Synchronization

Synchronization by Burst Signal (of composite video signal)

Sync Level Range Synchronization by External Subcarrier Signal (which is applied to the EXT REF input)

Subcarrier Signal Sync

Level Range Synchronization by Black Burst Signal (which is applied to the EXT REF input)

Black Burst Sync Level

Range

Subcarrier Frequency

Sync Capture Range

Phase Adjustment Range Calibration

Test Circle

Power Requirements

Dimensions and Weight

Accessories

Synchronization by the horizontal sync signal of composite video signal from input A or B. Negative

0.286 Vp-p ±6 dB

2 Vp-p ±6 dB

0.43 Vp-p ±6 dB Note: The external subcarrier signal is switched to and from the black burst signal internally. (set in black burst mode at shipment)

3.579545 MHz ±50 Hz (0°C to 40°C) 360°, continuously variable

Set the chrominance signal applied from the input connector in asynchronous mode. 100, 120, 200, 240 VAC, selectable by internal wiring 50/60 Hz, 40 Wmax. 215 (W)×132 (H)×429 (D) mm, 7.3 kg 8 1/2 (W)×5 1/4 (H)×16 3/4 (D) in, 16.1 lbs Illumination lamp

Cover/Inlet stopper

Screw, rack mounting (inch size)

Power cord

Instruction manual

123° 103.4° 60.8°

33°

347.1°

303°283.4°240.8°

213°

167.1°

-(B-Y) BURST

-(R-Y)

R-Y

B-Y

Page 38

MULTI FORMAT VIDEO GENERATOR MAINFRAME

LT 443D

The LT 443D Signal Generator can be flexibly used for the multiformat digital broadcast systems. Various plug-in units enable the output of SDI signals (i.e., HDTV, SDTV), sync signals, and analog signals. By using these signals and genlock functions, users can customize this signal generator as desired.

FEATURES

•

Plug-in units provide various functions

Since up to four plug-in units can be installed in the mainframe (consisting of a power supply, main signal generator, and controller), users can customize this signal generator as desired. *1 The plug-in unit is installed at the factory; user cannnot

replace the unit.

•

Applicable to multiformat HDTV

For the SDI signals, 14 HDTV format unit and 525 line/625 line SDTV unit are provided. The NTSC/PAL analog video signal unit is also available. Since each unit can output the signal simultaneously, a multiformat system can be constructed to satisfy user's requirements.

•

Various sync output

Two units can simultaneously output HD signals with 74.25 MHz clock and 74.25/1.001 MHz clock.

•

Easy-to-use sync signals

For today's modern age of digital TV systems, BB signal (for NTSC/PAL) and HDTV tri-level sync signals can be generated from the Analog BB Unit.

•

Ethernet provided

Since the ethernet capability is provided as standard. This feature can remotely control various functions and monitor the genlock status.

•

User-friendly operability

Leader's traditional design and operability concepts are also reflected in this instrument. User-friendly operation includes significantly reduced power-on initialization time is advantageous to a high-performance instrument.

•

Reading logo mark data

■

OPTION

LT 443D-70 (NATURAL Picture Memory: Option 70)

This option adds the NATURAL picture pattern output capability to the LT 443D mainframe. A compact flash memory card is used as an additional memory to store the NATURAL picture pattern.

Various plug-in units expand the capability of the Multiformat Signal Generator.

Compartment

Number of compartments

ID Function

LCD Panel

Number of Characters

Internal Clock

Internal Reference Frequency Memory Card Slot

Applicable Card

Function

External Interface

Ethernet

USB

(Universal Serial Bus)

General Specifications Environmental Conditions

Operating Temperature Range

Operating Humidity Range

Spec-Guaranteed Temperature Range

Spec-Guaranteed Humidity Range

Operating Environment

Operating Altitude

Overvoltage Category

Pollution Degree Power Requirements Power Consumption Dimensions and Weight

Accessories

4 Automatically identifies the unit installed. *2 Refer to specifications of each unit.

20 characters x 2 lines can be displayed (W/backlight)

27 MHz

Compact flash memory card (CFA TYPE-1) *3 Storing/reading preset data Reading logo mark data Reading NATURAL PICTURE data *4 *3 No compact flash memory card is supplied as standard accessory. Memory cards produced by following manufacturers should be procured (as of August

2002):SanDisk *4 The NATURAL picture function is only usable when the LT 443D-70 Option is installed in the mainframe.

10Base-T/100 Base-T (Automatic selection) Applicable to USB 1.1 This function will be supported.

0 to 40 ˚C ≤ 90% RH (without condensation) 10 to 35 ˚C ≤ 85% RH (without condensation) Indoor use Up to 2000 m II 2 90 to 250 VAC, 50/60 Hz Approx. 150 W max. (Approx. 75 W max. *5) 426 (W) x 44 (H) x 560 (D) mm, Approx. 7 kg *5 *5 When four plug-in units (i.e., LT 443D-HD, LT 443D-SD, LT 443D-BL, LT 443D-GL) are installed. 16 3/4 (W) x 1 3/4 (H) x 22 (D) in., 15.4 lbs

Power cord....................................................1

Cover/Inlet stopper .......................................1

Rack Support (right and Left) .......................1

Screw (for rack support)...............................4

Rubber Feet..................................................5

Logo Mark Software CD-R............................1

Instruction manual ........................................1

LT 443D SPECIFICATIONS

Page 39

LT 443D-GLA GENLOCK UNIT

This unit provides genlock capability to lock the LT 443D mainframe with the external reference signal, and three independent black signal generators. The NTSC/PAL black burst signals, principal 20 types of HDTV analog trilevel sync signal formats, and 525p/625p analog sync signals can be used as an external reference signal. The following black burst signal formats can be selected. For NTSC/PAL system, black burst signal with field reference pulse is provided. For NTSC system, black burst with 10-field sequence identification conforming to the SMPTE 318M standards is provided. The instrument continues operation since the flywheel mode is provided even if the external reference signal is accidentally removed in genlock mode. By logging the genlock status, the time can be obtained when the external reference signal is removed. The log information can be stored on

the CF CARD. The genlock timing can be adjusted for the entire color frame range when the NTSC/PAL black burst signal is applied; entire frame range when the HDTV analog tri-level sync signal is applied. Three black burst signal output systems with selectable formats are available as follows: For NTSC/PAL system, standard black burst signal and black burst signal with field reference pulse are provided. For NTSC system, 10-field black burst signal with ID conforming to the SMPTE 318M standards, 525p/625p analog sync signal, and HDTV analog tri-level sync signal are provided. The format and output signal timing of each output can be respectively set. The black signal timing can be adjusted for the entire color frame range when the NTSC/PAL black burst signal is applied; entire frame range when the HDTV analog tri-level sync signal is applied.

The LT 443D-HD HD-SDI Unit adds the 14 format HDSDI signal output capability to the LT 443D mainframe. Various functions (e.g., ID character, simple motion pictures, embedded audio, NATURAL picture pattern*) are provided. *The NATURAL picture function is only usable when the LT 443D-70 Option is installed in the mainframe.

Output

• HD-SDI Video Output

Specifications

• Specifications

SDI Characteristics

• Bit Rate

• Output Amplitude

• Overshoot

• Rise and Fall Time

• Return Loss

Function

• Applicable Format

• Test Patterns

1 system, 2 outputs (75 Ω, BNC)

Conforms to SMPTE 240M(Except for Return Loss) /274M/296M standards

1.485 Gbps, 1.485/1.001 Gbps 800 mVp-p ±10%

≤ 10 % ≤ 270 ps (20 % to 80 %) ≥ 15 dB (5 MHz to 742.5 MHz) ≥ 10 dB (742.5 MHz to 1.485 GHz)

1035i/60, 1035i/59.94, 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080PsF/24, 1080PsF/23.98, 720p/60, 720p/59.94 The following formats will be supported: 720p/29.97, 720p/24, 720p/23.98, 720p/50, 720p/30, 720p/25 COLOR BAR 100 %, COLOR BAR 75 %, MULTIFORMAT COLOR BAR (ARIB STD-B28) FLAT FIELD 100 %,

• Variable Timing Variable Range Variable In V

•

Simple Motion Picture Mode (Scroll)

Direction Speed

(Range, Resolution) Field Frame Interlace V Interlace H Common

• ID Character

• Embedded Audio Number of Channels Embedded

Sampling Frequency Resolution Preemphasis Frame Number Frequency

Level

FLAT FIELD 50 %, FLAT FIELD 0 %, LINE SWEEP 100 %, MULTI BURST 100 %, BOWTIE 100 %, RAMP, SHALLOW RAMP, 10 STEP, PULSE & BAR, CHECK FIELD, RED RASTER 100 %, CROSS & DOT, MONOSCOPE

Entire frame range Line steps Clock steps (74.25 MHz or 74.25/1.001 MHz)

8 directions (vertical, horizontal, diagonal)

Variable in field steps 0 to 256 lines in 2 line steps 0 to 256 dots in 4 dot steps ID characters can be displayed at the arbitrary position on the screen.

8 channels (4 channels x 2 groups) Each group can be set ON/OFF 48 kHz (sync to video signal) 20 bits, 24 bits, selectable OFF, 50/15 µs, CCITT, selectable (CS bit is only selected.) None 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800, 1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k, 3.0 k,

3.2 k, 4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k, 9.6 k, 10 k, 12 k, 15 k, 16 k, 20 kHz, silence

-60 to 0 dBFS (settable in 1 dB steps) *Frequency, level, and audio click can be set to each channel. *When the CHECK FIELD pattern is selected, no audio signal is embedded.

Sync Level (into 75 Ω)

• HDTV

• 525p

• 625p

• NTSC

• PAL

Rise and fall times

• HDTV

• 525p

• 625p

• NTSC

• PAL

Horizontal Sync Width

• 1125-Line Format

• 750-Line Format

• 525p

• 625p

• NTSC/PAL

Vertical Sync Width Output Connector Number of Outputs Timing Variable Range

• H-PHASE

• V-PHASE

• F-PHASE

N14/SMPTE RP-154/SMPTE 170M/SMPTE 318M standards PAL black burst signal conforming to ITU-R BT. 4706 standards

Positive polarity: 300 mV ±6 mV Negative polarity: -300 mV ±6 mV

-300 mV ±6 mV

-300 mV ±6 mV 40 IRE ±1 IRE

-300 mV ±6 mV

54 ns ±20 ns 70 ns ±10 ns 100 ns ±10 ns 140 ns ±10 ns 200 ns ±10 ns

Positive polarity: 593 ns ±40 ns Negative polarity: 593 ns ±40 ns Positive polarity: 539 ns ±40 ns Negative polarity: 539 ns ±40 ns

2.35 µs ±0.05 µs

2.35 µs ±0.1 µs

4.7 µs ±0.1 µs 5H (HDTV) / 6H (525p) / 5H (625p) / 3H (NTSC) / 2.5H (PAL) BNC 1 each

Up to ±1 line-1 dot Up to ±1 frame-1 line Up to ±5 frames

(depends on the input signal format.)

Genlock Function

Loop-Through Input

Input Configuration Return Loss Reference Input Signal

Reference Input Signal Level

• HDTV

• 525p/625p

• NTSC

• PAL

Operation Modes

Genlock Timing Variable Range

• H-PHASE (FINE)

• H-PHASE (COARSE)

• V-PHASE

• F-PHASE

Analog Sync Signal Output

BLACK 1/BLACK 2/BLACK 3 Output Format

BNC connector, 75 Ω loop-through ≥ 30 dB (0.3 MHz to 30 MHz)

HDTV tri-level sync signal conforming to SMPTE 240M/274M/296M standards 525p/625p analog sync signal conforming to SMPTE 293M/ITU-R BT 1358 standards NTSC black burst signal conforming to EBU N14/SMPTE RP-154/SMPTE 170M/SMPTE 318M standards PAL black burst signal conforming to ITU-R BT. 470-6 standards

Positive polarity: 300 mV Negative polarity: -300 mV

-300 mV

-286 mV

-300 mV AUTO and MANUAL modes are provided for selecting INT or EXT mode.

Fine adjustment between the H-PHASE (COARSE) steps. ±1/2 line with respect to the input signal ±1 frame with respect to the input signal Up to ±5 frames with respect to the input signal. (Variable range depends on the input signal format.)

HDTV tri-level sync signal conforming to SMPTE 240M/274M/296M standards 525p/625p analog sync signal conforming to SMPTE 293M/ITU-R BT 1358 standards NTSC black burst signal conforming to EBU

Plug-In Unit For LT 443D

LT 443D-HD HD-SDI UNIT/LT 443D-HDB (HD-SDI Out x 2, HD-SDI Black Out x 2) UNIT

Plug-In Unit For LT 443D

Page 40

Output

• SD-SDI Video Output

Specifications

• Specifications

SDI Characteristics

• Bit Rate

• Output Amplitude

• Overshoot

• Rise and Fall Time

• Return Loss

Function

• Applicable Format

• Test Patterns

1 system, 2 outputs (75 Ω, BNC)

Conforms to ITU-R BT. 601, SMPTE 125M standards Conforms to ITU-R BT. 656, SMPTE 259M standards

270 Mbps 800 mVp-p ±10 % ≤ 10 %

0.4 to 1.5 ns (20 % to 80 %) ≥ 15 dB (5 MHz to 270 MHz)

525i/59.94-270 MHz, 625i/50-270 MHz COLOR BAR 100%, COLOR BAR 75%, EBU COLOR BAR, BBC COLOR BAR, SMPTE COLOR BAR, RAMP & COLOR, FLAT FIELD 100%, FLAT FIELD 50%, FLAT FIELD 0%, FIELD ID, CROSSHATCH, LINE SWEEP 100%, LINE SWEEP 60%, MULTIBURST 100%, MULTIBURST 60%, OVER SIZE RAMP, DIGITAL LIMIT RAMP, SHALLOW RAMP, 10 STEP, CHECK FIELD, MONOSCOPE, BOWTIE 100%, PULSE & BAR, RED RASTER, MULTIPULSE

• Variable Timing Variable Range Variable In V

•

Simple Motion Picture Mode (Scroll)

Direction Speed

(Range, Resolution) Field Frame V H

• ID Characters Number of Characters Size

• Embedded Audio Number of Channels Embedded

Sampling Frequency Resolution Preemphasis Frame Number Frequency

Level

Entire frame range Line steps Clock steps (27 MHz)

8 directions (vertical, horizontal, diagonal)

Variable in field steps 0 to 256 lines in 2 line steps 0 to 256 dots in 4 dot steps

Up to 20 32 x 32 dots, 64 x 64 dots, selectable

8 channels (4 channels x 2 groups) Each group can be set ON/OFF respectively. 48 kHz (sync to video signal) 20 bits, 24 bits, selectable OFF, 50/15 µs, CCITT, selectable(CS bit is only selected.) ON/OFF, selectable 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800,

1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k, 3.0 k, 3.2 k,

4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k, 9.6 k, 10 k, 12 k, 15 k, 16 k, 20 kHz, silence

-60 to 0 dBFS (settable in 1 dB steps) *Frequency, level, and audio click can be set to each channel. *When the CHECK FIELD pattern is selected, no audio signal is embedded.

Function

• Sampling Frequency

• Frequency

• Level

48 kHz (Sync to video signal) 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800,

1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k, 3.0 k, 3.2 k,

4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k, 9.6 k, 10 k, 12 k, 15 k, 16 k, 20 kHz, silence

-40 to 4 dBm (settable in 1 dBm steps)

Output

• Number of Outputs

• Output Impedance

• Output Amplitude

•

Output Amplitude Accuracy

•

Output Amplitude Flatness

• Output Connector

2 600 Ω, balanced

0.775 Vrms (into 600 Ω at 0 dBm) ±0.5 dB (at 1 kHz) ±0.5 dB (1 kHz ref.) XLR-3P x 2

The LT 443D-SD SD-SDI Unit adds the 525/625 line format SD-SDI signal (4:2:2 component signal) output capability to the LT 443D mainframe. Various functions (e.g., ID character, simple motion pictures, embedded audio, NATURAL picture pattern*) are provided. *1: The NATURAL picture function is only usable when the LT 443D-70 Option is installed in the mainframe.

Installing the LT 443D-AA Analog Audio Unit in the LT 443D mainframe can output analog audio signal (two systems). Output characteristics (e.g., output level, frequency) can be independently set for each output system. The sound sampling frequency is synchronized with the video signal of plug-in unit installed in the mainframe.

Analog Sync Signal Output

BLACK 1, 2/BLACK 3, 4/BLACK 5, 6 Format

Sync Level (into 75 Ω)

• HDTV

• 525p

• 625p

• NTSC

• PAL

Rise and fall times

• HDTV

• 525p

HDTV tri-level sync signal conforming to SMPTE 240M/274M/296M standards 525p/625p analog sync signal conforming to SMPTE 293M/ITU-R BT 1358 standards NTSC black burst signal conforming to SMPTE RP154/SMPTE 170M/SMPTE 318M standards PAL black burst signal conforming to ITU-R BT. 4706 standards

Positive polarity: 300 mV ±6 mV Negative polarity: -300 mV ±6 mV

-300 mV ±6 mV

-300 mV ±6 mV 40 IRE ±1 IRE

-300 mV ±6 mV

54 ns ±20 ns 70 ns ±10 ns

• 625p

• NTSC

• PAL

Horizontal Sync Width

• 1125-Line

• 750-Line

• 525p

• 625p

• NTSC/PAL

Vertical Sync Width Output Connector Number of Outputs Timing Variable Range

• H-PHASE

• V-PHASE

• F-PHASE

100 ns ±10 ns 140 ns ±10 ns 200 ns ±10 ns

Positive polarity: 593 ns ±40 ns Negative polarity: 593 ns ±40 ns Positive polarity: 539 ns ±40 ns Negative polarity: 539 ns ±40 ns

2.35 µs ±0.05 µs

4.7 µs ±0.1 µs 5H (HDTV) / 6 H (525p) / 5H (625p) / 3H (NTSC) / 2.5H (PAL) BNC (BLACK 1, 2/BLACK 3, 4/BLACK 5, 6) 2 each

Up to ±1 line-1 dot Up to ±1 frame-1 line Up to ±5 frames

(depends on the input signal format.)

The LT 443D-BL Analog Black Signal Unit adds the 20 HDTV format analog tri-level sync signal, 525p/625p analog sync signals, and NTSC/PAL black burst signals output capability to the LT 443D mainframe. Three independent output systems (six outputs, two outputs per system) are provided to output multiformat black sync signal. The format and output signal timing can be respectively set each output.

The ten-field black signal with ID conforming to the SMPTE 318M standards is also available. The entire range of timing can be set for the 525p/625p analog sync signals and NTSC/PAL black burst signals in 54 MHz clock steps. The entire range of timing can also be set for the HDTV analog trilevel sync signal in 74.25 MHz or 74.25/1.001 MHz clock steps.

LT 443D-BL ANALOG BLACK UNIT

LT 443D-SD SD-SDI UNIT/LT 443D-SDB

(SD-SDI Out x 2, SD-SDI Black Out x 2)

UNIT

LT 443D-AA ANALOG AUDIO UNIT

Plug-In Unit For LT 443D

Page 41

Output

•

AES/EBU Digital Audio Output

Number of Outputs Output Amplitude Output Connector

•

Silence Signal (DARS grade 2) Output

Number of Outputs Output Amplitude Output Connector

• 48 kHz Word Clock Number of Outputs Output Amplitude Output Connector

Signal Specifications

• Specifications

4 (2-channel output) 1 Vp-p ±0.1 V (into 75 Ω) BNC

1 (2-channel output) 1 Vp-p ±0.1 V (into 75 Ω) BNC

1 1 Vp-p ±0.1 V (into 75 Ω), 5 V CMOS, selectable BNC

ANSI S4.40 (AES3-1992), AES 11-1997 SMPTE 276M, AES-3id-2001

Function

• Sampling Frequency

• Resolution

• Preemphasis

• Frequency

• Level

• Audio Click

• Output ON/OFF

• Timing Variable Range

48 kHz (sync to video signal) 20 bits, 24 bits, selectable OFF, 50/15 µs, CCITT, selectable (CS bit can only be selected.) 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800,

1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k, 3.0 k, 3.2 k,

4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k, 9.6 k, 10 k, 12 k, 15 k, 16 k, 20 kHz, silence

-60 to 0 dBFS (settable in 1 dB steps) 1, 2, 3, 4 sec, none Selectable

±1 AES/EBU frame Settable in 512 fs (24.576 MHz) steps *The timing can be varied with respect to the Video Unit installed in the LT 443D mainframe. The settings are common to the digital audio, silence and word clock signals. *Frequency, level, and audio click can be set to each channel. Other items (except timing) can be respectively set to the 2-channel output.

Installing the LT 443D-DA Digital Audio Unit in the LT 443D mainframe can output AES/EBU digital audio signals (four systems), silence signals (one system), and 48 kHz word clock signals. The AES/EBU signal characteristics (e.g., output level, frequency) can be independently set for each output system. The sampling frequency is synchronized with the video signal of plug-in unit installed in the mainframe.

Test Signal Output

• Format

• Pattern

• NATURAL Picture *5

• APL MODE

Time Interval

• ID Charactor Number of Characters Size Display Position Blinking

NTSC, NTSC+REFERENCE *2, NTSC+ID *3, NTSC+REFERENCE+ID *2 *3, NTSC+SETUP, NTSC+SETUP+REF *2, NTSC+SETUP+ID *3, NTSC+SETUP+REF+ID *2 *3, PAL *4, PAL+REFERENCE *4 *2

*2 REFERENCE and REF denote Field Reference. *3 ID denotes 10 field ID. *4

The 25-Hz offset subcarrier is used for the PAL system. COLOR BAR 100%, COLOR BAR 75%, EBU COLOR BAR, BBC COLOR BAR, SMPTE COLOR BAR, FLAT FIELD 100%, FLAT FIELD 50%, FLAT FIELD 0%, CROSSHATCH 1, CROSSHATCH 2, LINE SWEEP 100%, LINE SWEEP 60%, MULTIBURST 100%, MULTIBURST 60%, SHALLOW RAMP, 10 STEP, MOD 10 STEP, RAMP, MOD RAMP, MONOSCOPE, RED RASTER, WINDOW, PULSE & BAR Up to five screens of 24-bit full color BMP file can be simultaneously switched.

APL OFF, APL HIGH, APL LOW, APL(BOUNCE), BOUNCE APL (BOUNCE) is switched at a preset time interval for APL HIGH and APL LOW. BOUNCE is switched at a preset time interval for FLAT FIELD 100 % and FLAT FIELD 0 %. 1 to 20 seconds (settable in one second steps)

Up to 20 32 x 32 dots, 64 x64 dots, selectable Arbitrary position on the screen. OFF, 1 to 10 seconds (settable in one second steps)

•

Simple Motion Picture Function

Direction Speed

• Timing Variable H-PHASE V-PHASE F-PHASE

• Number of Outputs

Black Signal Output

• format

• Output Signal

• Format

• Timing Variable H-PHASE V-PHASE F-PHASE

• Number of Outputs

• Signal Level

Horizontal Drive Pluse Output

• Format

• Signal Level

• Signal Polarity

• Timing Variable H-PHASE

• Number of Outputs

Vertical Drive Pluse Output

• Format

• Signal Level

• Signal Polarity

• Timing Variable V-PHASE

• Number of Outputs

8 directions (up, down, left, right, and combinations) H: 0 to 256 dots in 4 dot steps V: 0 to 256 lines in 2 line steps (Pattern can be scrolled in field time steps.) *5 The Option LT 443D-70 should be installed in the mainframe to enable this function. The timing of OUTPUT 1 and 2 can be varied simultaneously. Up to ±1 line-1 dot Up to ±1 frame-1 line NTSC:Up to ±5 frames PAL: UP to ±2 frames 2

Depends on the test signal format. (Supports the field Reference and 10 field ID) Analog black burst The timing of OUTPUT 1 and 2 can be varied simultaneously.

Up to ±1 line-1 dot Up to ±1 frame-1 line NTSC:Up to ±5 frames PAL: UP to ±2 frames 2 Systems (one each) 1 Vp-p (into 75 Ω)

Depends on the test signal format. 2 Vp-p (into 75 Ω) Negative

Up to ±1 line-1 dot 1

Depends on the test signal format. 2 Vp-p (into 75 Ω) Negative

Up to ±1 frame-1 line 1

The LT 443D-CS Analog Composite Unit adds the NTSC/PAL analog composite signal output capability to the LT 443D mainframe. Various functions (e.g., ID character, simple motion pictures, embedded audio, NATURAL picture pattern *1) are provided. *1: The NATURAL picture function is only usable when the Option LT 443D-70 is installed in the mainframe.

LT 443D-DA DIGITAL AUDIO UNIT

LT 443D-CS ANALOG COMPOSITE UNIT

Plug-In Unit For LT 443D

Page 42

MULTI FORMAT VIDEO GENERATOR

Applicable to both HD-SDI and SD-SDI systems, 1U half-rack size

The compact, 1U half-rack sized, LT 4400 Multiformat Video Generator is applicable to both HD-SDI and SD-SDI systems. The various output capabilities are provided: color bar, SDI check field test pattern, ID characters, logomark in QVGA size, safety-area marker, superimposing embedded audio, genlock mode to synchronize external reference signal, and three independent analog black signal systems.

•

Genlock mode

This instrument can be locked by a NTSC/PAL black burst or HDTV tri-level sync signals for variable timing. The NTSC/PAL black burst signals with field reference pulse signal, and NTSC/PAL black burst signal with 10-field ID are also applicable.

•

Stay-in sync function

This function ensures the stable operation in genlock mode even when the external reference signal is accidentally intermitent.

•

Analog black signal output

Three independent analog black signal output systems are provided. The black burst signal with the same format as the SDI output, or HDTV tri-level sync signal with the same format of clock frequency can be selected for variable timing. The NTSC/PAL black burst signals with field reference pulse signal, and NTSC black burst signal with 10-field ID are also applicable.

•

Pattern scroll (Simple motion picture mode)

The simple motion picture mode is provided to scroll the pattern.

•

Word clock output

The 48 kHz word clock output is provided to synchronize the audio signal.

•

Applicable to SNMP

The network system can easily be constructed since this instrument supports SNMP. (Not available currently)

FEATURES

•

Applicable to both HD-SDI and SD-SDI systems

Applicable to both HDTV (18 types of HDTV formats) and SDTV (525i/59.94, 625i/50) systems. The HDTV or SDTV can be selected.

•

Superimposing ID characters

The ID characters can be superimposed at the arbitrary position on the screen. The character blinks to indicate the freeze status.

•

Superimposing logomark

A logomark up to 320 (pixel) x 240 (line) in QVGA size can be superimposed at an arbitrary position on the screen. The logomark is converted from the bit map to four-grade monochrome data.

•

Safety-area marker

The 90 % and 80 % safety-area markers can be superimposed on the screen. The 4:3 aspect-ratio marker can also be superimposed in HDTV format.

•

Superimposing embedded audio

The 16 channels of embedded audio signals (4 channels x 4 groups) can be superimposed. The frequency and level can be respectively set for each channel.

LT 4400

■

OPTION

•

OP70:FULL SIZE LOGO Option

Applicable to the LOGO MARK of a full screen The Logo Mark of full screen size (up to 1920 x 1080 pixels) can be displayed.

Page 43

LT 4400 SPECIFICATIONS

SDI Output

Number of Outputs Conform To

HDTV SDTV

Applicable Format

HDTV

SDTV

Timing Variable

Variable Range Resolution

Test Patterns

HDTV

SDTV

Safety Area Marker

HDTV

SDTV

ID Characters

Number of Characters Size

HDTV

SDTV Display Position Freeze Confirmation Display

Logo Mark

Logo Mark Data Maximum Size Display Position Display Level Display Method File Format

Before Conversion

After Conversion Conversion Color Matrix

Conversion Method Transferring the Logo Mark Data

Pattern Scroll (Simple Motion Picture Mode)

Direction

Speed (Range, Resolution)

Field and Frame

Interlace Others

V Interlace

Others

H Common

Embedded Audio

Number of Channels Embedded

Sampling Frequency Resolution Preemphasis Frame Number Frequency Level

Audio Click

Genlock Function

Reference Input Signal

Input Configuration Input Signal

NTSC black burst signal

PAL black burst signal

HDTV tri-level sync signal Sync Level

NTSC black burst signal

PAL black burst signal

HDTV tri-level sync signal Maximum Input Level Operating Input Level Range External Lock Range Jitter

Burst Lock Mode

Sync Lock Mode

Operation Modes

INTERNAL

1 system, 2 outputs (75 Ω, BNC) HD-SDI/SD-SDI, selectable

SMPTE 274M, SMPTE 296M, SMPTE 292M (except return loss) ITU-R BT 601, SMPTE 125M ITU-R BT 656, SMPTE 259M

1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080PsF/24, 1080PsF/23.98, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, 720p/23.98 525i/59.94-270 MHz, 625i/50-270 MHz

Entire frame range V: Settable in line steps H: Settable in clock steps (74.25 MHz, 74.25/1.001 MHz, 27 MHz)

COLOR BAR 100 %, COLOR BAR 75 %, MULTIFORMAT COLOR BAR (ARIB STD-B28:75 % White, 100 % White, and + I signal, selectable), CHECK FIELD COLOR BAR 100 % (applicable to both 525i/59.94, 625i/50), COLOR BAR 75 %, SMPTE COLOR BAR (applicable to 525i/59.94), EBU COLOR BAR/BBC COLOR BAR (applicable to 625i/50), CHECK FIELD (applicable to both 525i/59.94, 625i/50)

Action safety area (90 %), Title safety area (80 %) 4:3 aspect ratio Selectable ON/OFF individually Action safety area (90 %), Title safety area (80 %) Selectable ON/OFF individually

Up to 20 characters

32x32/64x64/128x128 dots selectable 32x32/64x64 dots selectable Displays at an arbitrary position on the screen. Blinking OFF, 1 to 10 seconds

4-level monochrome data between 0 and 3 320(dot) x 240(line) (QVGA size) Displays at an arbitrary position on the screen Set arbitrary levels for levels 0 to 3 Simultaneous display with the ID character

24-bit full-color bitmap data (.bmp) format LT 4400/LT 443D dedicated (.lg) format Y = 0.212*R + 0.701*G + 0.087*B Converts 256-level monochrome data(Y) to four levels (level 0 to 3) using arbitrary threshold values. Converted using the logo mark conversion application. Saves the data to a commercially sold Compact Flash card and inserts it to the LT 4400. *The data loaded from CF card to the LT 4400 cannot be held when the power is turned OFF.

8 directions (vertical, horizontal, diagonal)

Variable in field steps Variable in frame steps 0 to 256 lines in 2 line steps 0 to 256 lines in 1 line steps 0 to 256 dots in 4 line steps

16 Channels (4ch x 4group). Each group can be set ON/OFF 48 kHz (sync to video signal) 20 bits, 24 bits, selectable OFF, 50/15 ms, CCITT, selectable (CS bit can only be selected) ON, OFF, selectable 400 Hz /800 Hz /1 kHz, selectable (sets to each channel) Can be selected including silence (sets to each channel)

-60 to 0 dBFS (settable in 1 dBFS steps) 1 sec/2 sec/3 sec/4 sec/OFF (sets to each channel)

* When the CHECK FIELD pattern is selected, no

audio signal is embedded.

* In the SDTV format, resolution becomes 20 bits

when the 16ch is output.

BNC (75 Ω, loop through)

EBU N14/SMPTE RP154/SMPTE 170M/SMPTE 318M ITU-R BT.470-6 SMPTE 274M, SMPTE 296M

-286 mV

-300 mV ±300 mV ± 4.5 V (DC + peak AC) ±6 dB ± 10 ppm

≤ 0.5 ° ≤ 1 ns

Internal reference signal is used for operation. (INT mode)

AUTO (GO INTERNAL)

The EXT is automatically selected when the external reference signal is applied to the GENLOCK input. The INT mode is automatically selected when the external reference signal is removed.

MANUAL (GO INT)

The EXT mode is automatically selected when the external reference signal with the same format specified to the GENLOCK input is applied after power is turned on. The INT mode is automatically selected when no external reference signal is applied to the GENLOCK input or signal format does not match the specified format.

AUTO (STAYinSYNC)

The EXT mode is automatically selected when the external reference signal is applied to the GENLOCK input after power is turned on. If the external reference signal is accidentally removed during operation, the instrument continues operation under the conditions immediately before the signal is removed since STAYinSYNC mode is provided. After the external reference signal is recovered, the system is automatically locked.

MANUAL (STAYinSYNC)

The EXT mode is automatically selected when the external reference signal with the same format specified to the GENLOCK input is applied after power is turned on. If the external reference signal is accidentally removed during operation, the instrument continues operation under the conditions immediately before the signal is removed since STAYinSYNC mode is provided. The STAYinSYNC mode will be held until the reset operation is performed via the front panel even after the external reference signal is recovered.

Genlock Timing

Variable Range

NTSC black burst signal PAL black burst signal HDTV tri-level sync signal

Resolution

H V F

Reference Point

(at the time of the

black burst input)

NTSC

PAL

Analog Sync Signal Output

Format

NTSC black burst signal HDTV tri-level sync

Output Signal

Number of Outputs

Setting Output Format

Output Connector

Output Impedance Output Connector

Output Timing

Setting Variable Range

NTSC black burst signal PAL black burst signal HDTV tri-level sync

Setting Resolution

NTSC black burst signal HDTV tri-level sync

Word Clock Output

Frequency Output Impedance Output Amplitude Output Connector Number of Outputs Timing Variable

Variable Range Setting Resolution

Memory Card Slot

Function Ethernet Connector

Type Function

LCD Panel

Number of Characters

Environmental Conditions

Operating Temperature Range Operating Humidity Range Spec-Guaranteed Temperature Spec-Guaranteed Humidity Operating Environment Operating Altitude Overvoltage Category Pollution Degree

Power Requirements Dimensions and Weight

Accessories

±5 frames ±2 frames 1 frame (entire frame range)

0.0741 µs steps (13.5 MHz clock steps) 1 line steps 1 frame steps

The phase coincident point of line 4 of the NTSC and line 1 of the HDTV The phase coincident point of line 1 of the PAL and line 1 of the HDTV

EBU N14, SMPTE RP154, SMPTE 170M, SMPTE 318M SMPTE 274M, SMPTE 296M

6 Outputs (three output systems which equip with two connectors each) Settable

75 Ω BNC

Three systems can be set individually.

±5 frames ±2 frames 1 frame (entire frame range)

0.0185 µs steps (54 MHz in clock steps)

0.0135 µs steps (74.25/1.001 MHz in clock steps, or 74.25 MHz in clock steps)

48 kHz 75 Ω unbalanced ("1 Vp-p" output) 1 Vp-p ± 0.1 V (into 75 Ω), or 5 V CMOS, selectable BNC 1

±1 AES/EBU frame 512 fs (24.576 MHz) steps

Storing/reading preset data Reading logo data

10BASE-T/100BASE-TX, auto switching Transferring operation status (e.g., genlock status) Remote control (e.g., pattern switching) SNMP supported (to be supported in the future)

20 characters x 2 lines can be displayed (w/backlight)

0 to 40 °C ≤ 85 % RH (without condensation) 10 to 30 °C ≤ 85 % RH (without condensation) Indoor use Up to 2000 m I 2

DC12 V (10 to 18 V) 20 W 213(W) x 44(H) x 400(D) mm (excluding projections), 1.8 kg

8 3/8(W) x 1 3/4(H) x 15 4/5(D) in., 4 lbs

AC adapter.............................................................1

Instruction manual..................................................1

Page 44

SPECIFICATIONS

AUTO CHANGEOVER

LT 444/LT 4440

The LT 444/LT 4440 is a changeover unit that automatically switches the signal from the primary signal to the backup signal when problems are detected in the primary signal. If a switch occurs from the primary signal to the backup signal, the LT 444/LT 4440 indicates the channel that caused the problem on the LED front panel.

The LT 444/LT 4440 is a changeover unit that switches to the backup system when failures occur.

FEATURES

•

Input/Output

Provides 11 channels (a single channel consists of PRIMARY input, BACKUP input, and OUTPUT output) on a single LT 444.

• Delay for Starting the Monitor

The delay for starting the error monitor at power up can be set to FAST or SLOW depending on the rise time of the system signal source being connected.

• Determination Criteria of the Signal Level

The internal preset switch allows level detection switching among SD-SDI, AES/EBU digital audio, NTSC or PAL analog black burst, HD analog tri-level sync, HD-SDI(only supported on channels 1 to 6), and other signals.

• Error Display

When a signal level error is detected, the LT 444 illuminates the error LED on the front panel as well as the LED panel that indicates the channel causing the problem. This feature allows quick investigation of the problem.

• Dimension

Inputs

PRIMARY inputs

BACKUP input

Outputs

OUTPUT outputs

Input/Output Characteristics (CH1 to CH11)

Return Loss

Input Signal Type

Signal Type

Determination Criteria of the Signal Level

Detection Level

Error Display

Total Error LED

Error Channel LED

Panel Key Lock

Time to Key Lock

External Control (REMOTE) Connector

Application Connector Type

Dimensions and Weight

Accessories

1 input each for 11 channels (75 Ω BNC connector) 1 input each for 11 channels (75 Ω BNC connector)

1 output each for 11 channels (75 Ω BNC connector)

30 dB 0 to 10 MHz 15 dB 10 MHz to 750 MHz 10 dB 750 MHz to 1.5 GHz

Set the type of input signal applied to the LT 444 using the internal dip switch. HD-SDI (CH1 to CH6 only) SD-SDI (270 Mb/s) SD-SDI (143 Mb/s) AES/EBU digital audio Tri-level sync signal NTSC black burst PAL black burst

Detects an error when the amplitude of the input signal drops by 2 to 5 dB from the defined level and makes the switch. The detection level can be set to LOW or HIGH for each signal type.

Notifies errors by illuminating the error LED on the panel. Detects the channel causing the error and shows the channel by illuminating the corresponding LED.

The key lock is automatically enabled when key operation is not detected for 60 s.

For external remote control. 9-pin Dsub connector

426 (W) x 44 (H) x 560 (D) mm(LT 444) 426 (W) x 44 (H) x 400 (D) mm(LT 4440) (excluding protrusions), 4 kg 16 3/4 (W) x 1 3/4 (H) x 22 (D) in.(LT 444) 16 3/4 (W) x 1 3/4 (H) x 15 4/5 (D) in.(LT 4440) (excluding protrusions), 8.8 lbs

Rack supports

.......................................................

Rack support attachment screws

..........................

Power cord

............................................................

Instruction manual

.................................................

•LT 444 is a Deeper Cabinet

(LT 4440)

Page 45

The LT 4440 can be configured in the system with the LT4400

LT 4440 is a Short Cabinet

REAR PANEL

The LT 444 can be configured in the system with the LT443D

LT 444 is a Deeper Cabinet

The photo is LT 444

400 mm

15 4/5 in.

560 mm 22 in.

Dimension

Page 46

410BB SPECIFICATIONS

NTSC SYNC GENERATOR

410BB

The 410BB is an NTSC Sync Generator that provides sync generator signals for other video equipment.

■410BB REAR PANEL

Provides six black burst outputs

FEATURES

•

Provides six black outputs

•

Provides composite sync and subcarrier outputs

•

Provides SMPTE color bars output

•

Digital waveform generation provides highly accurate and stable signals.

•

Supplies two 1 kHz outputs of audio tone

•

The low-profile rackmount size easily fits into system configuration

Black Burst (1)

System and other System

Number of Scanning Lines Field Frequency Line Frequency Subcarrier Frequency Output Impedance Number of Outputs

(2)

Sync Signal and Color Burst Sync Signal

Amplitude Blanking Level Rise/Fall Times Horizontal Sync Pluse Width Vertical Sync Pluse Width Equalizing Pluse Width Vertical Serration Pluse Width Virtical Blanking Period

Color Burst

Amplitude Number of Cycles Rise/Fall Times SCH Phase

NTSC-M, conforms to SMPTE 170M standards 525, interlaced

59.94 Hz

15.73426 kHz

3.579545 MHz ±10 Hz 75 Ω 6

286 ±14.3 mV 0 ±20 mV 140 ±20 ns

4.7 µs±100 ns 3H

2.3 µs±100 ns

4.7 µs±100 ns 20H +1.5 µs

286 ±14.3 mVp-p 9 300+200 ns, or 300-100 ns ±10 °

Composite Sync

Amplitude Output Impedance Polarity Timing Rise/Fall Times Number

of Outputs

Subcarrier

Amplitude Output Impedance Frequency Phase Number

of Outputs

SMPTE Color Bar

Specifications Full Amplitude Number of Outputs

Analog Audio Tone

Frequency Output Waveform Output Amplitude

Output Impedance Output Connector Number of Outputs

Others

Power Requirements

Size and Weight

Environmental Conditions Spec-Guaranteed Accuracy

Operating

Storage

Accessories

4±0.2 V into 75 Ω 75 Ω Negative ±100 ns, compared with black burst 140±20 ns 1

2±0.2 Vp-p into 75 Ω 75 Ω

3.579545 MHz ±10 Hz ±10 °, compared with black burst 1

Conforms to SMPTE ECR1-1978 standards. 1 Vp-p ±20 mVp-p into 75 Ω 2

1 kHz±100 Hz Sine Wave 0±0.5 dBm, or 4±0.5 dBm, selectable by internal switching 600 Ω, balanced XLR type (3-pin), cannon 2

100, 120, 220, 240 VAC, 50/60 Hz, 20 Wmax. selectable by internal wiring 426 (W)×44 (H)×400 (D) mm, 6 kg 16 3/4(W)×1 3/4(H)×15 4/5(D) in., 13.3 lbs

Temperature:0 to 35 °C Humidity:≤ 85 % RH(without condensation) Temperature:0 to 40 °C Humidity:≤ 85 % RH(without condensation) Temperature:-10 to 50 °C

Rack support

1 set

Power cord

Instruction manual

Page 47

STEREO AUDIO MONITOR

5835

■5835 REAR PANEL

Lissajous Display of Stereo Audio Signals Display with LED of Stereo Polarity Discrimination

The 5835 is a Stereo Audio Monitor that provides a lissajous pattern display of stereo audio signal on a CRT screen, enabling monitoring of the phase and level of the signal. The lissajous pattern display of the stereo signal is provided with the left and right axes inclined at 45 degrees, enabling a good visual presentation of audio effects such as broadening and apparent position. The 5835 features a stereo polarity discrimination function, a spot killer, and two Cannon-type inputs, making it ideal for use in not only program editing, but in checking of transmission equipment as well. All this makes the 5835 a useful stereo audio monitor for broadcast, production, and recording studios or remote pickup applications as well.

FEATURES

•Parallel-connected male and female type XLR Cannon connectors are provided as standard for the balanced input configuration, enabling direct monitoring the lines required in broadcasting, production, and recording studios, or remote pickup applications.

•A stereo polarity discrimination function (patent pending) enables easy extraction and screen display of the audio signal during editing of commercial tapes, and when monitoring the output waveform from a broadcast stereo signal, thereby greatly simplifying the task of checking the phase of the stereo signal.

•The 5835 is housed in an standard EIA half-rack size cabinet, simplifying rack mounting and use in systems in combination with other equipment.

•A 150 mm post-acceleration (12 kV) type CRT ensures a bright display.

•The scale-illumination lamp can be replaced easily from the front panel.

•A spot killer blanks the trace with no signal applied to prevent burn-in of the CRT phosphor.

PAT. PEND.

5835 SPECIFICATIONS

CRT

Type Accelerating Potential Effective Display Area Scale Illumination Beam Rotator Graticule

X, Y-Axis

Input Connector

Input Impedance

Full Scale Input

Bandwidth Phase Difference Gain Adjustment

Stereo Polarity

Calibration

Z Axis

Spot-Killer

Front Panel Operation

Power Requirements

Dimensions and Weight

Accessories

Rectangular, 150 mm Post acceleration 12 kV 100 (H)×75 (V) mm Adjustable on the front panel Adjustable on the front panel External graticule with phase graticule

Two types input.L and R Rear cannon connector XLR-3-31, XLR-3-32 (First earth, second hot, third cold) Balanced input.more than 20 kΩ, changing to 600 Ω in internal At 775 mVrms input for L and R Full scale display in CRT (Y axis: L=R) (At CAL'D, RANGE 0 dB) 20 Hz to 20 kHz ±0.5 dB 20 Hz to 20 kHz ±1° RANGE (–20 dB, 0 dB, +10 dB) VARIABLE (approx, ±10 dB) An LED display lights yellow when stereo signal is in reversed phase (L-R). The LED hold time is a minimum of approximately 5 seconds. When the range is calibrated, a 1 kHz sine signal is input to the left and right channels enabling rotation adjustment and checking of gain.

The trace is blanked in the no-signal condition. POWER, INTEN, FOCUS, ILLUM, ROTAT, X-POSITION,

Y-POSITION, RANGE, VARIABLE, STEREO POLARITY 100, 120, 220, 240, VAC, 50/60 Hz Approx.

35 Wmax.

(set at the factory before shipping)

215 (W)×132 (H)×429 (D) mm, Approx. 7 kg 8 1/2 (W)×5 1/4 (H)×16 3/4 (D) in., Approx. 15.4 lbs

Power cord 1 Spare illumination lamp

Scale filter (for X-Y)

Screw, rack mounting (inch size)

Cover/Inlet stopper

Page 48

New Measurement Method

Overview of the 5 Bar Display

Overview of the SDI-EXT REF Phase Difference Display

■ 5BarDisplayEnablestheSimultaneousObservation ofDigitalBroadcastsandCompositeLevels

■ SDI-EXTREFPhaseDifferenceDisplay

■ BarDisplayDetails

In the 5 bar display, video signal peak levels can be displayed instead of vectors. Five different bars are used to simultaneously display five different levels: luminance (Y), green (G), blue (B), red (R), and composite (COMP). The 5 bar display functions as a mode of the vector display. It is viewable as an alternate display under the vectorscope menu. The G, B, R, and COMP bars are converted from the SDI Y, C

B, and

R signals using matrix calculation.

100

-33

-40

120

133

135

GBR CMP

IRE

●Contentsofthe5BarDisplay

●Overview

The SDI-EXT REF phase difference display shows the phase differences between an SDI signal and an external sync signal (EXT REF).

●Features

Graphic and Numeric Displays of SDI and External Sync Signal (EXT REF) Phase Differences Traditionally, the most common SDI phase adjustment method was to determine the phase difference by switching between an internal and external sync signal and observing the waveform

●AfeaturethatshowsthephasedifferencesbetweenSDIandexternalsync(EXTREF)signals.

●You can readily determine the phase difference between an SDI and external sync (EXT REF) signal through graphic and numericphasedifferencerepresentations.YoucanalsodeterminethephasedifferencesbetweendifferentSDIsignalsbysettingthedifferenceforonesignaltozero.

●Youcanrecorduptoeightphasedifferences.Youcanquicklydeterminethephasedifferencesbetweenmultipleinputs.

shift. However, you can view phase differences and adjust phases more easily by using the SDI-EXT REF phase difference display.

RelativeSDISignalPhaseDifferencesAreDisplayable

By setting a particular SDI-EXT REF phase difference to zero, you can display relative SDI signal phase differences.

StoreUptoEightDifferentPhaseDifferences

You can store up to eight different phase differences. This allows you to store up to eight different switcher SDI signal phases.

NumericDisplay

Thecurrentphase differences betweentheappliedSDIand EXTREFsignalsareindicated numericallyunder CURRENT PHASE.

PhaseDifferenceLog

Youcanstoreupto eight sets of measuredvalues.Thisisusefulin casessuchaswhenyouusea devicesuchasa switcher to changeinputsandmatchphases.

GraphicCenter

The V marker turns from white togreenwhenitisinthecenter. The H marker turns from white togreenwhenitiswithin±3 clocksofthecenter.

Y,G,B,R

100

●ContentsoftheComponentBarDisplay

CMP

IRE

100

120

133

135

-33

-40



●ContentsoftheCompositeBarDisplay

Y level bar

Positive peak

100 % color bar negative peak limit with 0 % setup.

Maximum negative modulation level

Luminance positive peak limit

Luminance negative peak limit

The blanking interval data does not appear in the bar levels.

Indicates the range between the positive and negative peak levels of Y + C (luminance + chrominance) in the SDI signal after it has been converted to a composite signal.

100 % color bar negative peak limit with 0 % setup.

Reference level with

0.7 V set to 100 %

Reference level with 0 V set to 0 %

Negative peak

Indicates the range between the negative and positive peak levels

SDI Y signal level

Composite gamut bar

The combined luminance and chrominance signal level of the SDI signal after it has been converted to a composite signal.

GBR component gamut bars

The converted GBR levels of the SDI signal

Page 49

Page 50

OPTIONAL ACCESSORIES

Useful for incorporating video equipment system

LR 2404A

Cabinet

LR 2427B

Cabinet

LI 2306 (A set of 5 pcs.)

Illumination lamp

LI-2308 (LED)

Illumination lamp

without handle with handle

LI 2307 (A set of 2 pcs.)

Illumination lamp

LC 2126

Metal Cabinet

LH 2139

Viewing Hood

LR 2751-I

Rackmount adapter

A must for outdoor use

LC 2127

Tripod Mounting Plate

LP 1960

AC Adapter

For LV 5750For LV 5380 For LV 5750

For LV 5750

LC 2128

Front cover

For LV 5380, LV 5330,LT 4400, LV 5750,

LV 7700, LV 7720

126.5 mm.

4.98 in.

409 mm.

209.5 mm.

8.25 in.

16.10 in.

209.5 mm.

8.25 in.

126.5 mm.

4.98 in.

409 mm.

16.10 in.

Page 51

OPTIONAL ACCESSORIES

Dedicated Rack Mount Adapter (Sold Separately)

LR 2750-I

Rackmount adapter

LR 2700A-I

Rackmount adapter

EIA standard, inch size

LC 2125A Blank Panel

For LV 5750

190

482mm.

18.98in.

7.48in.

132mm.

5.20in.

mm.

LC 2125A Blank Panel

LR 2701 Rackmount Storage box

432mm.

130mm.

5.12in.

410mm.

16.14in.

482mm.

18.98in.

17.01in.

5.20in.

2.25in.

mm.

132mm.

57.2

Replacing with a lamp for 5222, 5850V, 5860V, etc. Replacing with a lamp for 5835

One unit of LV 7700 or LT 4400 fit in LR 2480 (Not for 2 units)

2 units of LV 7700/LT 4400 fit in LR 2477

LR 2701 is designed to be appropriated for the storage box LR 2700I/AI, Rackmount Adaptor

LV 5800, LV 5700A, LV 5152, 5212, 5222

LV 5800, LV 5152, 5212, 5222, LV 5700A,LV 5750, 5835, 5850V, 5860V, 5861V

Replacing with a lamp for 5850V, 5860V

LI 2306 LI 2307

LR 2480

LR 2477

LR 2701

LR 2404A LR 2427B

LR 2700A-I

LI 2308

Illumination lamp Illumination lamp

Rackmount adapter

Rackmount Strage Box

LV 5380 only

LR 2751-I

Rackmount adapter

LV 5750 only

LR 2750-I

Rackmount adapter

Applicalle Model

Model Product Name

Cabinet (without handle) Cabinet (with handle)

Rackmount adapter

Illumination lamp (LED)

＊White CRT is standard. ＊Description and specifications in this catalog are subject to change without previous notice. ＊ Caution: Use a cabinet with the specified model number. If you use a cabinet that has not been specified, ventilation will not take place properly, and damage to the instrument,

smoke emission, or fire may result.

LV 5700A, LV 5750

LC 2128

Front cover

LR 2700A-I, LR 2750-I

LR 2125A

Blank Panel

LR 2477

Rackmount adapter

LR 2480

Rackmount adapter

Page 52

2-6-33 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-8505, Japan PHONE: 81-45-541-2123 FAX: 81-45-541-2823

LEADER ELECTRONICS CORP.

http://www.leader.co.jp

Jun.8,200909061KTS󱦯PrintedinJapan

SPECIFICATION CHANGES: LEADER ELECTRONICS CORP. reserves the right to discontinue the sale of instruments and/or change the speci ca-

tions of instruments at any time without responsibility for the incorporation of new features in the instruments already sold.

LEADER INSTRUMENTS CORP. (U.S.A.) PHONE:1-714-527-9300 LEADER INSTRUMENTS (H.K.) LTD. PHONE:852-2721-2503 LEADER ELECTRONICS CORP. BEIJING OFFICE PHONE:86-10-8511-8606/8607

LEADER ELECTRONICS CORP. SHANGHAI OFFICE PHONE:86-21-62756905, 62759629 LEADER ELECTRONICS EUROPEAN OFFICE PHONE:31-40-2565008

ACCESORIES For Video Test-Instruments

Also available following accessories

Dedicated Rack Mount Adapter (Sold separately)

LH 2140

LR 2751 I

LC 2129

LR 2481 For one Unit For two Units

LR 2752

LC 2130

LR 2478

for : LV 5380

※

The LV 5380 is sold

separatoly.

For : LV 5380

For:LR2751I

For:LV7330,LT4400

BatteryattachmentforLV5330andLV5380 ModelNo.:C-EB(XLR) ModelName: ExternalBatteryTerminal   (V-Mount:IDX)

CarryingCaseforLV5330 ModelNo.:i0812-2790 ModelName: CarryingcaseforLV5330

for:LR2752

For:LV7330,LT4400

for:LV5330

Handle

Rack Mount Adapter

Blank Panel (Sold Separatoly)

Rack Mount Adapter

Blank Panel (Sold Separatoly)

Rack Mount Adapter

Model Product Name Applicable Model

LR 2751-I Rackmount adapter LV 5380 LR 2752 Rackmount adapter LV 5330 LR 2478 Rackmount adapter 2 units of LV 7330/LT 4400  t in LR 2478 LR 2481 Rackmount adapter One unit of LV 7330 or LT 4400  t in LR 2481 (Not for 2 units) LC 2129 Blank panel LR 2751-I only LC 2130 Blank panel LR 2752 only

LH 2140 Handle LV 5380

There are two kinds of battery adapters for LV 5330 and LV 5380. Please refer to the following table for the difference.

Model No.

Battery Status Display

Installation

Battery Mount IDX (V-Mount)

Ye s Factory

C-EB(XLR) No Customer

Page 53

SPECIFICATION CHANGES:

LEADER ELECTRONICS CORP. reserves the right to discontinue the sale of instruments and/or change the specifications of instruments at any time without responsibility for the incorporation of new features in the instruments already sold.

ORDERING INSTRUCTIONS:

When inquiries or orders re made, please specify operating voltage and AC frequency of the instrument the VOLTAGE of the power supply etc. of the instruments to be used. The instruments can be furnished for AC line voltages of 100, 120, 220, or 240 volts and desighed to operate at the voltages which are with in ±8 % of the rated line voltage.

ENVIRONMENTAL CONDITIONS:

Our products can be used under the following conditions unless stated otherwise. <Operating range>

1.Temperature: 0 to 40 °C

2.Humidity: 85 % RH (without condensation)

POWER REQUIREMENTS:

 VA  in the  Power Consumption  indicates the apparent power.

Models marked with "Green Leaf" meet the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Directive 2002/95/EC RoHS).

AboutGreen-LeafMark

EUWEEEDirective

LEADER ELECTRONICS CORP.

2-6-33 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-8505, Japan

PHONE:81-45-541-2123

LEADER INSTRUMENTS CORP.(U.S.A) LEADER INSTRUMENTS (H.K.)LTD. LEADER ELECTRONICS CORP.BEIJING OFFICE LEADER INSTRUMENTS (H.K.)LTD.DONGGUAN OFFICE LEADER ELECTRONICS CORP.SHANGHAI OFFICE LEADER ELECTRONICS EUROPEAN OFFICE

AGENT

PHONE:1-714-527-9300 PHONE:852-2721-2503 PHONE:86-10-8511-8606/8607 PHONE:86-769-83829381,83829391 PHONE:86-21-62756905,62759629 PHONE:31-40-2565008

The EU WEEE Directive applies to this product and its accessories. When disposing of this product or its accessories, follow the regulations in your country or region. (WEEE Directive: Waste Electrical and Electronic Equipment)

http://www.leader.co.jp

FAX:81-45-541-2823 FAX:1-714-527-7490 FAX:852-2723-7573 FAX:86-10-8511-8608 FAX:86-769-83819289 FAX:86-21-62751486 FAX:31-40-2565009

TSSep.12,2008 08097K Printed in Japan

LEADER Video Test Instruments Catalog 2008-2009

Specifications and Main Features

Frequently Asked Questions

User Manual

COMPANY PROFILE

17

LV 58SER04 MPEG DECODER

19

LV 58SER40A DIGITAL AUDIO