LDT Littfinski Daten Technik LDT-01 Operation Instruction
Littfinski DatenTechnik (LDT)
Install
ation Instruction
Decoder-Case
from the Digital-Professional-Series !
LDT-01 Part-No.: 000104
⇒ 4-fold turnout decoder S-DEC-4 / 1-DEC-DC
⇒ 4-fold switch decoder SA-DEC-4
⇒ 4-fold decoder for motor driven turnouts M-DEC
⇒ DigitalBooster DB-2 / Adap-CDE / Adap-Roco
⇒ 16-fold feedback module RM-88-N / RM-88-N-O
⇒ Booster Keep Separate Module BTM-SG
⇒ Reverse-Loop Module KSM-SG
⇒ 4-fold light-signal decoder LS-DEC
⇒ 4-fold train influence module ZBM
⇒ 16-fold feedback module RS-16-O
⇒ HSI-88(-USB) and Data switch DSW-88-N
⇒ WatchDog-decoder WD-DEC
⇒ TrainDetect-88 TD-88 / Transp. reader COL-10
⇒ Track occupancy detector GBM-8
⇒ DiCoStation and KeyCommander KeyCom
⇒ TurnTable-Decoder TT-DEC / TT-DEC-R
⇒ SupplyBox SB-4
This product is not a toy! Not suitable for children under 14 years of age!
The kit contains small parts, which should be kept away from children under 3!
Improper use will imply danger of injuring due to sharp edges and tips! Please
store this instruction carefully.
CE Part-No.:
24 00 15
Introduction:
You have purchased the case LDT-01 for your model railway
which is supplied within the assortment of Littfinski
DatenTechnik (LDT).
• The case is suitable for the installation of many LDT
components from the Digital-Professional-Series !
Suitable for the LDT-Decoder:
k
j
Installation of the decoder:
The case consists of a lower j and a upper cover k. The
printed circuit board of the decoder shall be placed into the
lower case. The upper case can be easily closed over the pcboard by snap locks. The connection clamps and the
operating devices (as per respective decoder: program push
button, plug-connectors or bridge-plugs) will be free
accessible.
Please copy the rear side of the installation instruction, cut out
the suitable label for your decoder and stick it on top of the
upper casing.
Further Products from our Digital-
Professional-Series:
S-DEC-4
4-fold turnout decoder for four magnet accessories and 1
Amp. switching power each. With free programmable decoder
addresses and possible external power supply.
M-DEC
4-fold decoder for motor driven turnout-drives (Conrad,
Hoffmann, Fulgurex and others) with free programmable
decoder addresses and possible external power supply.
SA-DEC-4
4-fold switch decoder with 4 bistable relays and 4 Amp.
switching power each. With free programmable decoder
addresses and possible external power supply.
RM-88-N / RM-88-N-O
16-fold feedback modules (also with integrated opto-coupling)
for the s88-feedback bus for the connection to Memory and
Interface (Märklin / Arnold), Central Station 1 and 2, ECoS,
Intellibox respectively TWIN-CENTER, EasyControl,
DiCoStation and HSI-88.
RM-GB-8-N
8-fold feedback module with integrated track occupancy
detectors for the s88-feedback bus.
RS-8
8-fold feedback module with integrated track occupancy
feedback and voltage monitor for the RS-feedback bus.
DB-2
Short circuit protected DigitalBooster (Märklin-Motorola- and
DCC-Format) for Control Unit, Intellibox, TWIN-CENTER,
EasyControl, ECoS, DiCoStation, KeyCom and PC-Direct
control DIGITAL-S-INSIDE.
HSI-88(-USB)
High Speed Interface for the s88-feedback bus. Offers the
possibility to create three s88-feedback lines. The feedback
reports will be transmitted directly via the digital central unit to
the PC via the serial COM- or USB-port.
WD-DEC
The WatchDog-Decoder stops automatically all trains in case of
a PC or digital central-control-unit brake down.
All products can be purchased as easy to assemble complete
kits or as ready finished modules or finished module in a
case.
Littfinski DatenTechnik (LDT)
D-25492 Heist/Germany
Phone: 0049 4122 / 977 381
Fax: 0049 4122 / 977 382
Internet: http://www.ldt-infocenter.com
Subject to technical changes and errors. 03/2015 by LDT
Made in Europe by
Kleiner Ring 9
Be a Digital-Professional!
Be a Digital-Professional!
Decoder of single coil
turnouts:
4-fold decoder of DCC digital systems.
Current load: 1 Ampere max.on each output.
Be a Digital-Professional!
1-DEC-DC
L
ittfinski DatenTechnik (
Multi-Digital
D-25492 Heist/Germany
www.ldt-infocenter.com
LDT
)
Decoder for motor (turnout-)
drives:
4-fold decoder of Märklin-Motorola digital systems.
Motor current: 1 Ampere max.on each output.
Be a Digital-Professional!
M-DEC-MM
L
ittfinski DatenTechnik (
Multi-Digital
D-25492 Heist/Germany
www.ldt-infocenter.com
LDT
)
Decoder for motor (turnout-)
drives:
4-fold decoder of DCC digital systems.
Motor current: 1 Ampere max.on each output.
M-DEC-DC
L
ittfinski DatenTechnik (
Multi-Digital
D-25492 Heist/Germany
www.ldt-infocenter.com
LDT
)
SupplyBox
SB-4
4-fach Spannungsverteilung vom Schaltnetzteilen.
4-fold voltage distribution from switching power
supplies.
L
ittfinski DatenTechnik (
D-25492 Heist/Germany
www.ldt-infocenter.com
LDT
)
Made in Europe by
Littfinski DatenTechnik (LDT)
Kleiner Ring 9
D-25492 Heist/Germany
Phone: 0049 4122 / 977 381
Fax: 0049 4122 / 977 382
Internet: http://www.ldt-infocenter.com
Subject to technical changes and errors. 03/2015 by LDT
Loading...