LD3300-XX
2, 4, 6, 8, 10, 12, 14, and 16-Channel Programmable
+5V, -3V, MR Head Preamplifier
r
version 3.0
DESCRIPTION
The LD3300-XX is one in the family of integrated
circuit products designed for use with MagnetoResistive recording heads. It is a register-based design
to provide maximum programmability. These devices
support 2, 4, 6, 8, 10 up to 16 channel MR Head. It
contains an MR low noise read amplifier, a thin film
head write driver and Interface/Command Control
block which provides the ability to program the
multiple operation modes, write currents and MR bias
voltages as well as control diagnostic functions. This
product family requires dual supply voltage of 5V, and
-3V. These devices are available in TQFP, or flip chip.
FEATURES
• Programmable Bandwidth from 150 to 360MHz
• Write current rise/fall time = 2.0ns
• Programmable Read Amplifier Gain 150, 250,
300, 350 V/V through ICCB (serial port)
• Programmable Thermal Asperity Threshold
Detection and Correction
• MR Head: Differential Voltage sense, Voltage
bias
• Head Unsafe, including Read and Write unsafe
sensing
• Interface/Command Control Block (ICCB) with
shadow register
• Servo write capability
• Power supply fault protection
• Programmable write current and MR bias voltage
• Available in TQFP & Flip Chip
BLOCK DIAGRAM
Write
DAC
Read
DAC
Head
Unsafe
Write
Current
Bias
Vref
Current
Generator
POR
0.40
Multiplier
Read
Bias
Source
MUX
Write
Data
Serial Port Control
address
Decoder
Head
Select
Mode
Select
Write Register
Read Register
6 Channel R/W, MR Bias
Write Driver
Dummy
Head
Prog.
Gain
Post Pre
Amplifier
Read
Amp
Interface/Command Control Block
WDY
CN VEER
VEE VDD VSS
HUS
RDX RDY CBY1 CBX1
HRX0
HRY0
HWX0
HWY0
HRX5
HRY5
HWX5
HWY5
SDATA
SCLK
SDEN
MRRN
IWRN
CHEN
RREF CBY2 CBX2
WDX
Prog
Thermal
Asp. Detc.
&
Correction