LD SC-500 User Manual

LightLaser

Model：SC-500

20K

User Guide

Thank you for purchasing the of Laser Show product. The
product integrate optics, electron, digital graphics disposal, and other
multinomial advanced technology, design for disco, KTV, and stage
show technically. It can from beam program according to music
rhythm, and it can bring space channels, light wall & other
dimensional effect combine with fog. It can generate a mutative dream
world for you.

Features of the product:

1. The adopt laser show, the major laser parameter as followed:

Green: All Solid State lasers up to 80mW @532nm
Red: All Solid State lasers up to 200mW @650nm
Blue: All Solid State lasers up to 200mW @403nm

2. Adopt original high-capability optics multicolor lens technology,
implement polychrome laser effect.

3. Cartoon laser show adopt large capacitance step motor control system
and excellent optics scanning lens to produce vivid and wonderful laser
character ,design and cartoon effect.

4. Multiple play mode optional: sound activation, manual control,DMX512
signal control, so it can be use in multifarious occasion.

5. Compatible with the International standard DMX512 signal with 11 control
channel can be agile controlled.

6. Through principal and subordinate setting, realize several machines run
synchronou

7.Input power: AC 200V～240V 50/60Hz. Power: 60w.

Installation

1. Carefully inspect your Laser Show equipment as you unpack it. If any

damage is evident, such as dents or scratches on the covers or broken
knobs, etc., immediately notify your carrier and your local sales
distributor.

2. Hang up the equipment in a safe place. Ensure that there are no

barriers before the laser aperture.

3. Choose the operation mode.

The rear panel view:

Let us look at the function of the DIP switch:

1st-9

th

bit: Start address (from 1-255).

The 10

th

bit: Sound/ DMX512 mode