LD SC-12/R User Manual

User’s manual

product code: 991247

SC-12/R

CODE 991247

SCANNER

SC-12/R

INTRODUCTION................................................................................................page 2

SAFETY PRECAUTIONS...................................................................................page 3

TECHNICAL FEATURES...................................................................................page 4

ASSEMBLING...................................................................................................page 5

CONNECTION TO THE POWER SUPPLY.........................................................page 6

MOUNTING AND REPLACING THE LAMP......................................................page 7

FOCUS AND MIRROR ADJUSTMENT.............................................................page 8

GOBOS REPLACEMENT...................................................................................page 8

DMX SIGNAL CONNECTION............................................................................page 9

CONFIGURATION AND CONTROLS................................................................page 10

SWITCH “OPTIONS”.........................................................................................page 11

DMX CHANNELS FUNCTIONS........................................................................page 12

TROUBLESHOOTING.......................................................................................page 13

•TABLE 1 - GENERAL PROBLEMS........................................................page 13

•TABLE 2 - PROBLEMS TO THE CONNECTION DATA LINK...............page 14

•MOTORS PC BOARD...........................................................................page 15

MAINTENANCE................................................................................................page 18

APPENDIX “A” - 8 CHANNELS CONFIGURATION..........................................page 18

INDEXINDEX

INDEX

We thank you for choosing the SC-12/R.

Characterized by an attracting design and an incredible optic system, the SC-12/R is suitable for any kind of ambient.

A modern and reliable electric circuit gives stability and functioning safety for long time.

To make the most of this unit and to make it work correctly in the years, before connecting it to its source and using it, we suggest you to carefully read this manual.

In this way you could be more familiar with its commands and connections so to easily use it.

INTRODUCTIONINTRODUCTION

INTRODUCTION

All the sections of this manual have been studied to make as easy and complete as possible the use of the SC-12/R.

To make the manual more clear and easy to consult, we have used the following symbols and conventions:

very important warnings, to be read with the maximum attention;

important parts of the text that give details and/or explanations on the use of the SC-12/R.

practical advices for an efficient use of the SC-12/R.

IMPORTANT

The safety of the unit is guaranteed only strictly following the instructions, so it is recommended to accurately preserve them.

SC-12/R

CODE 991247

•PROTECTION AGAINST FIRE

1) This unit has been made to work only with the Lamp: HMI 1200W GS (OSRAM).

! ABSOLUTELY NEVER USE OTHER KIND OF LAMPS.

2) Keep a minimum distance of 0,3 mt. from walls or any inflammable surface.

3) Keep a minimum distance of 1 mt. from lighted objects.

4) Replace the fuses with others of the same kind and value (5x20 250V 10A).

5) Do not install the projector close to heat sources. Do not lay the connection cables on the projector when it is hot.

•PROTECTION AGAINST ELECTRIC SHOCKS

1) This projector must be earthed.

2) Class I equipment. The protection conductor must be part of the power supply cable.

3) For the connection to the main power supply proceed as in fig. 2/a, page 6.

4) Disconnect the power supply before the Lamp replacement or before opening the unit.

5) Do not install the projector outdoors, exposed to rain or moisture.

•PROTECTION AGAINST MECHANICAL HAZARDS

1) When installing the projector use a safety chain.

2) To avoid explosion risks, open the projector only after 5 minutes after the lamp is off.

3) The temperature of the projector can reach high levels. Wait for almost 5 minutes before operating on it.

4) Replace the Lamp if it is damaged or deformed by the heat.

•PROTECTION AGAINST UV RADIATIONS HAZARDS

1) Do not start on the projector without the protecting screen or if the lenses and the ultra-violet filters are damaged.

2) The protecting screens, the lenses and the ultra-violet filters must be replaced if visibly damaged and if their efficiency has been reduced, for example by slits or deep cuts.

3) Do not directly look at the Lamp when it is on.

•WARNINGS

1) Do not dismantle and modify the unit.

2) To avoid any inflammable liquids, water or metal objects entering the unit.

SAFETY PRECASAFETY PRECA

SAFETY PRECA

UTIONSUTIONS

UTIONS

READ ALL CAUTIONS AND WARNINGS PRIOR TO OPERATE THIS EQUIPMENT.

INSTRUCTIONS TO PREVENT INJURIES OR DAMAGES DUE TO FIRE, ELECTRIC SHOCKS, MECHANICAL

HAZARDS AND UV RADIATIONS HAZARDS.

IMPORTANT

SC-12/R

CODE 991247

SAFETY PRECASAFETY PRECA

SAFETY PRECA

UTIONSUTIONS

UTIONS

Make sure that the unit has not been damaged during the transportation.

In case it has happened or in case the unit does not work correctly, immediately contact the Retailer.

If the unit has been directly sent to you , immediately contact the Freight Company.

Only the final receiver (the person or the Company that receive the unit) is in the position to

complain for the above inconveniences.

YOUR REFERENCE

Cite the model and the serial number anytime you contact your retailer to ask for information or assistance.

STANDARD PACKAGE

The standard package of the SC-12/R contains:

1) Projector ON REQUEST:

2) Mains connector * Lamp (code 060268)

3) DMX XLR5 (pc. 2) signal connectors * Flight Case without wheels (code 194979)

4) User’s manual * Black clamp Ø50 (code 194019)

5) Guarantee

IMPORTANT

TECHNICAL FEATECHNICAL FEA

TECHNICAL FEA

TURESTURES

TURES

SC-12/R

CODE 991247

PMALPMAL

PMAL

PMALPMAL

)MARSO(SGW0021IMHpmalegrahcsiD K°006.5:erutarepmetruoloC sruoh057:efilpmalegarevA

TNEMEVOMTNEMEVOM

TNEMEVOM

TNEMEVOMTNEMEVOM

.TLIT°04,NAP°081:.cd2+srotomreppetS6

dnalatnoziroheht,srotomreppetsehtfospets-orcimfometsysdetacitsihposaotsknahT

wolsdnatsafhtobnietaruccadnaraenilylemertxeerarorrimehtfostnemevomlacitrev

.stnemevom

LACITREVLACITREV

LACITREV

LACITREVLACITREV

TNEMEVOM

°05-/°05+

.noitatneirolaunaM

SRUOLOCSRUOLOC

SRUOLOC

SRUOLOCSRUOLOC

.)7egap,a/3.gif(ETIHW+)elbaegnahcretnilla(SRUOLOC9

.)tceffewobniar(leehwruolocehtfodeepsnoitatorehtetalugerotelbissopsitI

SOBOGGNITATORSOBOGGNITATOR

SOBOGGNITATOR

SOBOGGNITATORSOBOGGNITATOR

.)7egap,a/3.gif(ETIHW+)elbaegnahcretnilla(SOBOGGNITATOR6

.)tceffewobniar(leehwobogehtfodeepsnoitatorehtetalugerotelbissopsitI

SOBOGDEXIFSOBOGDEXIF

SOBOGDEXIF

SOBOGDEXIFSOBOGDEXIF

.)7egap,a/3.gif(ETIHW+)elbaegnahcretnilla(SOBOGDEXIF9

.)tceffewobniar(leehwobogehtfodeepsnoitatorehtetalugerotelbissopsitI

TUOKCALB/OBORTSTUOKCALB/OBORTS

TUOKCALB/OBORTS

TUOKCALB/OBORTSTUOKCALB/OBORTS

.ycneuqerfelbatsujdanahtiwtceffeOBORTS;tceffeTUOKCALB

.).ces/hsalf21.xam,.ces/hsalf1.nim(

MSIRPGNITATORMSIRPGNITATOR

MSIRPGNITATOR

MSIRPGNITATORMSIRPGNITATOR

.deepsnoitatorelbatsujdA.msirPsecaf-eerhtgnitatoR

MAEBTHGILMAEBTHGIL

MAEBTHGIL

MAEBTHGILMAEBTHGIL EDUTILPMA

.ecnatsidfo.tm6tarotcejorpehthtiw,)°5,31(.tm3,1.maiD

REWOPTUPNIREWOPTUPNI

REWOPTUPNI

REWOPTUPNIREWOPTUPNI

.zH05;caV032:egatlovgnitarepolanimoN•

.W0031:ylppusrewopdetaR•

.)caV032(A01:tnerruclanimoN•

GNIKROWGNIKROW

GNIKROW

GNIKROWGNIKROW NOITISOP

.noitisopynA

SNOISNEMIDSNOISNEMID

SNOISNEMID

SNOISNEMIDSNOISNEMID

)HxDxW(

.)5egap,1.giF(593x028x084.mm

THGIEWTHGIEW

THGIEW

THGIEWTHGIEW

33.gK

YDOBYDOB

YDOB

YDOBYDOB

.muinimuladnaleetS

fig. 1

TECHNICAL FEATECHNICAL FEA

TECHNICAL FEA

TURESTURES

TURES

BRACKET

MANUAL ORIENTATION

KNOBS

ASSEMBLINGASSEMBLING

ASSEMBLING

! Before installing the SC-12/R, make sure that the carrying structure is safe and able to support the weight of

the unit.

The SC-12/R is equipped with a bracket with three holes (diam. 10 mm.) to fix clamps and/or screw bolts (fig. 1).

To orientate the unit, follow these instructions:

1) Unscrew the knobs placed at the both sides of the unit (fig. 1);

2) Orientate the unit in the preferred position;

3) Screw the above said knobs.

! Once finished make sure that the unit is correctly fixed and stable. ! Always make sure that you are using a safety chain. ! Do not install the unit outdoor directly exposed to rain or moisture. ! To avoid installing the projector close to heat sources. ! The unit must be at a minimum distance of 30 cm. from the walls or from any inflammable material and 1 mt.

from lighted objects.

! The unit must be placed where it could be easily aerated. To avoid obstructing the in/out air gratings.

SC-12/R

CODE 991247

ITALY

SC-12/R HMI 1200

230

1300

55/02

Amp.

Lamps

Max. Temp.

S.R.L.

SPEC.

50°C

HMI 1200

fig. 2

BEFORE USING THE PROJECTOR

! Carefully read the precautions on page 3 before installing the projector.

In particular read the following points:

1) Disconnect the power supply before replacing the lamp or doing any maintenance job.

2) Do not open the projector if are not passed at least 5 minutes after it went off.

3) Always wear protective gloves and goggles to replace the lamp or to work inside the projector.

4) The protecting screens, the lenses and the ultra-violet filters must be replaced if visibly damaged. Slits or deep cuts remarkably reduce their efficiency.

5) To avoid any bad performance of the projector or that the lamp breakage could damage its optic, replace the lamp as soon as it reaches its average life time (750 hrs).

6) Periodically clean the in/out air grates.

7) In case the projector must be held on a structure (truss), make sure that it is well and safely fixed,

even using a safety chain from the projector to the structure.

8) Do not install the projector outdoors, directly exposed to rain and moisture.

9) Before connecting the projector to the main power supply, make sure that the working voltage and

frequency correspond to the values indicated on the label (fig. 2). The SC-12/R is supplied to work at a working voltage of 230V 50Hz (60Hz on request); 10A. For being supplied with a voltage of 100-120V it is absolutely necessary an auto-transformer with the following characteristics:

• Output voltage 230V.

• Output current 11A.

10) The connection of the projector to the mains is described in fig. 2/a: 10 a) Do not install the projector close to heat sources. Do not lay the connection cables on the

projector when it is hot.

10 b) The unit must be placed where it could be easily aerated. To avoid obstructing the in/out air

gratings.

10 c) The projector must be distanced almost 0,3 mt. from walls or any inflammable surface

and almost 1mt. from lighted objects.

The unit must be connected to the earth. The inobservance of these instructions automatically makes the guarantee expiring.

CONNECTION TCONNECTION T

CONNECTION T

O THE POWER SUPPLO THE POWER SUPPL

O THE POWER SUPPL

IMPORTANT

POWER SUPPLY INPUT

SC-12/R

CODE 991247

fig. 2/a

L = PHASE (Brown) N = NEUTRAL (Blue) = EARTH (Green - Yellow)

THREE POLES FEMALE CONNECTOR FOR THE CONNECTION TO THE MAINS

+ 15 hidden pages

LD SC-12/R User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual