LD LAX5 User Manual
c
WWW.LD-SYSTEMS.COM
USERS’ MANUAL
LAX 5
5-CHANNEL MIXER
Tel: (+49) 6081 / 9419-0 Fax: (+49) 6081 / 43280
All rights reserved to Adam Hall. All features and content might be changed
without prior notice. Photocopying, translation, or reproduction of any part of this
manual without written permission is forbidden. Copyright 2007 Adam Hall GmbH
Adam Hall GmbH
www.adamhall.com
info@adamhall.com
LAX 5
www.ld-systems.com
USERS’ MANUAL
NOTES:
LD-Systems
IMPORTANT!
Please read this manual carefully before operating
this unit for the first time.
All rights reserved to Adam Hall GmbH. All features and content might be changed
without prior notice. Photocopying, translation, or reproduction of any part of
this manual without written permission is forbidden.
Page 2
LD-Systems
Page 15
NOTES:
SAFETY RELA TED SYMBOLS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol, wherever used, alerts you to the presence of un-insulated and dangerous voltages within the product enclosure. These are voltages that
may be sufficient to constitute the risk of electric
shock or death.
This symbol, wherever used, alerts you to important operating and maintenance instructions.
Please read.
- Fuse
To prevent fire and damage to the product, only use
the recommended fuse type as indicated in this
manual. Do not short-circuit the fuse holder. Before
replacing the fuse, make sure that the product is
OFF and disconnected from the AC outlet.
- Protective Ground
Before turning the product ON, make sure that it is
connected to Ground. This is to prevent the risk of
electric shock.
Never cut internal or external Ground wires. Likewise,
never remove Ground wiring from the Protective
Ground Terminal.
LD-Systems
Page 14
Protective Ground Terminal
AC mains (Alternating Current)
~
Hazardous Live Terminal
ON: Denotes the product is turned on.
OFF: Denotes the product is turned off.
WARNING
Describes precautions that should be observed to
prevent the possibility of death or injury to the user.
CAUTION
Describes precautions that should be observed to
prevent damage to the product.
This product should not be disposed in
municipal waste and should be collected
separately.
WARNING
- Power Supply
Ensure that the mains source voltage (AC outlet)
matches the voltage rating of the product. Failure
to do so could result in damage to the product and
possibly the user.
Unplug the product before electrical storms occur
and when unused for long periods of time to reduce
the risk of electric shock or fire.
- External Connection
Always use proper ready-made insulated mains
cabling (power cord). Failure to do so could result
in shock/death or fire. If in doubt, seek advice from
a qualified electrician.
- Do Not Remove Any Covers
There are areas within the product where high
voltages may be present. To reduce the risk of
electric shock do not remove any covers unless
the AC mains power cord is removed.
Covers should be removed by qualified service
personnel only.
No user serviceable parts inside.
LD-Systems
- Operating Conditions
Always install in accordance with the manufacturer's
instructions.
To avoid the risk of electric shock and damage, do
not subject this product to any liquid/rain or moisture.
Do not use this product when in close proximity to
water.
Do not install this product near any direct heat source.
Do not block areas of ventilation. Failure to do so
could result in fire.
Keep product away from naked flames.
IMPORT ANT SAFETY INSTRUCTIONS
Read these instructions
Follow all instructions
Keep these instructions. Do not discard.
Heed all warnings.
Only use attachments/accessories specified by the
manufacturer.
- Power Cord and Plug
Do not tamper with the power cord or plug. These are
designed for your safety.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek advice from
a qualified electrician.
Protect the power cord and plug from any physical
stress to avoid risk of electric shock.
Do not place heavy objects on the power cord. This
could cause electric shock or fire.
- Cleaning
When required, either blow off dust from the product
or use a dry cloth.
Do not use any solvents such as Benzol or Alcohol.
For safety reasons, keep product clean and free
from dust.
- Servicing
Refer all servicing to qualified service personnel only.
Do not perform any servicing other than the instruc-
tions contained within this Manual.
Page 3
Loading...