LCT LCTVR6104, LCTVR8208, LCTVR8216 User Manual
www.hrcctv.com
DIGITAL VIDEO RECORDER
USER MANUAL
LCTVR6104
LCTVR8208
LCTVR8216
USER MANUAL
LCTVR6104-8208-8216
pag.
2
www.hrcctv.com
NORME GENERALI DI SICUREZZA -
General safety recommendations
Sicurezza delle persone - Safety warnings
Leggere e seguire le istruzioni - Tutte le
istruzioni per la sicurezza e per l'operatività
devono essere lette e seguite prima che il
prodotto sia messo in funzione.
Precauzioni particolari - Rispettare
tassativamente l'ordine delle istruzioni di
installazione e collegamento descritte nel
manuale. Verificare le indicazioni riportate sulla targa di
identificazione: esse devono corrispondere alla vostra rete
elettrica di alimentazione ed al consumo elettrico. Conservate le
istruzioni per una consulta futura.
Read and follow the instructions - Read the installation
instructions before connecting the system to its power source.
Follow these guidelines to ensure general safety.
In order to prevent injury, burns or electrical shock to yourself
and others, follow the connection instruction plan carefully.
Sicurezza del prodotto - Product Safety
Non posizionare in prossimità di liquidi oppure in un ambiente ad
umidità eccessiva.
Non lasciare penetrare del liquido o corpi estranei all'interno
dell'apparecchiatura.
Non ostruire le griglie di aerazione.
Non sottoporre all'esposizione dei raggi solari oppure in prossimità
di fonti di calore.
Do not use the product in a wet location.
Never push a foreign object through an opening inside the
product.
Slots and openings are provided for ventilation and should never
be covered.
Do not place under direct sunlight or heat sources.
INFORMAZIONI SULL’AMBIENTE ENVIRONMENT INFORMATION
Note per lo smaltimento del prodotto
valide per la Comunità Europea
Questo prodotto è stato progettato e
assemblato con materiali e componenti
di alta qualità che possono essere
riciclati e riutilizzati. Non smaltire il
prodotto come rifiuto solido urbano ma
smaltirlo negli appositi centri di
raccolta. E’ possibile smaltire il
prodotto direttamente dal distributore
dietro l’acquisto di uno nuovo,
equivalente a quello da smaltire. Abbandonando il prodotto
nell’ambiente si potrebbero creare gravi danni all’ambiente
stesso. Nel caso il prodotto contenga delle batterie è
necessario rimuoverle prima di procedere allo smaltimento.
Queste ultime debbono essere smaltite separatamente in
altri contenitori in quanto contenenti sostanze altamente
tossiche.
Il simbolo rappresentato in figura rappresenta il bidone dei
rifiuti urbani ed è tassativamente vietato riporre
l’apparecchio in questi contenitori.
L’immissione sul mercato dopo il 1° luglio 2006 di prodotti
non conformi al DLgs 151 del 25-07-05 (Direttiva RoHS
RAEE) è amministrativamente sanzionato.
Disposal of waste products for European Union
This products was designed to minimize their impact on the
environment by reducing or eliminating hazardous
materials and designing for recyclables.
This product should be handed over to a designated
collection point, e.g., on an authorized one -for-one basis
when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment. Improper handling of this kind of waste could
have a possible negative impact on the environment and
human health due to potentially hazardous substances.
This symbol indicates that this product has not to be
disposed of with your household waste, according to the
WEEE Directive.
For more information about where you can drop off your
waste equipment for recycling, please contact your local
city waste authority, or your household waste disposal
service.
GARANZIA - Warranty
Questa garanzia ha validità di 2 anni a partire dalla data
di acquisto assicurata solo dietro presentazione della
fattura o scontrino rilasciati al cliente dal rivenditore.
L’assistenza gratuita non è prevista per i guasti causati da:
-Uso improprio del prodotto, immagazzinamento
inadeguato, cadute o urti, usura, sporcizia, acqua, sabbia,
manomissione da personale non autorizzato del prodotto
rispetto a quanto previsto nei manuali d’uso inclusi.
-Riparazioni, modifiche o pulizia effettuate da centri
assistenza non autorizzati da HR EUROPE.
-Danni o incidenti le cui cause non possono essere attribuite
alla HR EUROPE, comprendenti e non limitati a fulmini,
eventi naturali, alimentazione e ventilazione inadeguata.
This warranty is valid for 2 years from the date of
purchase obtained only against presentation of the
original invoice/ cash ticket issued to the customer by
the retailer.
Warranty repair service is excluded if damage or defects
have been caused by:
-Improper use, incorrect storage, dropping or shocks,
corrosion, dirt, water, handing or operation of the product
as referred to in the users’ manuals.
USER MANUAL
LCTVR6104-8208-8216
www.hrcctv.com pag.3
SUMMARY
1.
INTRODUCTION................................................................................................................. 4
warnings and cautions.............................................................................................. 4
package contents .................................................................................................... 4
CD-ROM software .................................................................................................... 4
Technical feature................................................................................................... 5
2.
INSTALLATION .................................................................................................................. 6
Rear panel other view and connection ........................................................................ 6
2.2 head-on panel ................................................................................................... 10
2.3 remote control .................................................................................................. 13
2.4 HD Installation ............................................................................................. 15
2.4.1 Hard Disk select......................................................................................................................15
2.4.2 Hard Disk estimate size..............................................................................................................15
2.4.3 Hard Disk assembling ................................................................................................................15
3.
SETUP MENU.................................................................................................................. 16
3.1 Main menu..................................................................................................... 16
3.2 system Setup .................................................................................................... 16
3.3 CAMERA setup ................................................................................................ 17
3.4 RECORD SET.................................................................................................... 17
3.5 SCHEDULE SET.................................................................................................. 17
3.6 MOtION SET ..................................................................................................... 18
3.7 PTZ SET .......................................................................................................... 18
3.8 netWORK SET .................................................................................................. 18
3.9 SPOT (only 8 and 16 channel) ............................................................................... 18
3.10 DVD-CD/RW Backup( 8 AND 16 cHANNEL) ............................................................... 19
3.11 DISK manage................................................................................................. 19
3.12 LOG search .................................................................................................. 19
4 BASE PLANNING .................................................................................................................... 20
4.1 MANUAL recording ............................................................................................ 20
4.2 planned recording ............................................................................................. 20
4.3 SEARCH ........................................................................................................... 20
4.3.1 search time and BACKUP USB ....................................................................................................21
4.3.2 Record search and BACKUP USB ...............................................................................................21
4.3.3 event record search and BACKUP USB ..........................................................................................21
5 NETWORK CONNECTION ....................................................................................................... 22
5.1 IP address configuration ...................................................................................... 22
5.2 connection by Internet Explorer............................................................................ 22
5.3 Software anvplayer through connection............................................................... 26
5.4 SMART PHONE by means of connection ................................................................... 29
the least system required:......................................................................................................29
Installation:.......................................................................................................................29
USER MANUAL
LCTVR6104-8208-8216
pag.
4
www.hrcctv.com
1. INTRODUCTION
Warnings and cautions
Do not expose this product to rain or moisture
Take away from clammy
Put in horizontal position
Skip out to the violent vibration
Do not rest up on another electric device
Exposition at light air,,do not cooling off the rear of DVR.
Package contents
Control the next accessory:
1. one power cable of 230 Vac.
2 .one power adequate 12Vdc.
3. one user manual
4. one CD software put in
5. one remote control of piloting to distant (with two battery powered 1.5V).
6. one set of screw
CD-ROM software
The content of the CD dowry:
Software cliente by faraway connexion by net LAN/WAN
Software Cliente for smarphone
User manual LCTVRxxxx_V_1_0.pdf
USER MANUAL
LCTVR6104-8208-8216
www.hrcctv.com pag.5
Technical features
model
LCTVR6104 LCTVR8208 LCTVR8216
System
Operating system
Embedded Operating System
Control device
Frontal panel , remote control
Video
Video input (PAL) BNC_1.0VP- P_ 75Ω
4
8 16
Video output 1 channel PAL, BNC1.0VP- P 75Ω ) 1 channel VGA (800x600 60Hz)
SPOT out
NO 1 1
Picture resolution Real time display: PAL 704×576 Recording : D1: 704 * 576
CIF 352×288
Recording fram rate
Real Time
CIF:25 fps for channel
CIF:12 fps for channel
Video compressing
MPEG4 H.264
Video display
1 o 4 window
1, 4, 8 window 1,4,8, 16 window
Video standard
PAL
Picture quality
3 level
Camera adjustment
brightness, hue , contrast , saturation
Video information
channel, Date and hour, Video Loss, Recording ON
Motion and alarm
Motion detection
Zones: 192 (16*12) detection zones
sensitivity : high – Normal – low
Velocity: , high – Normal –low
Alarm input
4 input NA 8 input NA 16 input NA
Alarm output
1 relay output NA/NC/COM
Hard Disk
Hard disk lodging
2 HD IDE (no including) 2 HD Sata (no including)
Hard disk space occupation
(Resolution CIF - 25 fps – normal quality):
～
800MB/H
～
1,3GB/H
Recording – play back - Backup
Recording mode
Manual, planning, Motion,Alarm
Overwrite
back
Search mode
time – Events – File (OK)
Play back
Play, break, Stop, Fast Play, Slow Play,
Backup mode
USB-HDD, HRX001GB, HRX004GB, Network download
Net work
Interface
RJ-45 10/100Mb
Remote operations
display, Control PTZ, play back file, Download file,
Web Server
Integrate, agreement Internet Explorer 6.0 o high.
PDA - Smartphone
back with MS Windows Mobile 5.0 o high. Request least link GPRS.
Auxiliary interface
USB
USB 2.0
RS485
Control PTZ (pan, tilt, zoom, focus, iris)
Cd-DVD burner
No Support for SATA CD/DVD burner
Environmental
Warking temperature -10°C - + 55°C
Warking temperature 10% - 90%
weight 2,5 Kg
size
440×300×70mm
Power Consuption 12Vdc 4A
Mounting Desktop
USER MANUAL
LCTVR6104-8208-8216
pag.
6
www.hrcctv.com
2. INSTALLATION
2.1 Rear panel overview and connection
LCTVR6104
LCTVR6104LCTVR6104
LCTVR6104
①
“1-4”:BNC video input
②
“MON”:BNC Video output .
③
“LIN – RIN”:Left Audio input ,Right Audio input .
“LOUT – ROUT”:Left Audio output ,Right Audio
④
”: USB output .
⑤
“VGA”: VGA Video output (800x600 60Hz)
“USB Interface
for Backup
⑥
“NET”: interface RJ-45 port.
⑦
“DC12V” Minijack power connector and ON/OFF
power button
⑧
“ALARM” Terminal block for Alarm and RS-485
device.
For the top shape of the device outer side link the power cable as show carry back on top picture.
USER MANUAL
LCTVR6104-8208-8216
www.hrcctv.com pag.7
485 A/B: link the 2 line wires some RS-485 wire line to along with make connection about the speed dome.
COM – NC – NO: power relay by alarm output. (common, normally close, normally open)
1 – 2 – 3 – 4: alarm input. No alarm channel is coupled and put in to action typical channel only..
For the top shape use the power source of12Vdc.
USER MANUAL
LCTVR6104-8208-8216
pag.
8
www.hrcctv.com
LCTVR8208
LCTVR8208LCTVR8208
LCTVR8208
f
①
“1-8”: BNC Video input .
②
“MON” e “SPOT”: BNC Video output .
③
“AUDIO IN/OUT” : Left & Right Audio input. Left & Right
Audio output.
④
“VGA” :VGA Video output (800x600 60Hz)
⑤
“NET”: RJ-45 Connector for net time link
⑥
“USB”: USB Interface of Backup.
⑦
“ALARM” potential devise outer side PTZ for alarm.
⑧
“DC12V” Minijack power and cook-off and power off.
⑨
Air-cooling
For the top shape of the device outer side link the power cable as show carry back on top picture.
485 A / B: link the 2 line wires some RS-485 wire line to along with make connection about the speed dome.
COM – NC – NO: power relay by alarm out put . (common, normally close, normally open)
1 – 2…8: alarm input . no alarm channel is coupled and put in to action typical channel only.
For the top shape use the power source of12Vdc.
1 9
2 3
4 5 6
7
8
USER MANUAL
LCTVR6104-8208-8216
www.hrcctv.com pag.9
LCTVR8216
LCTVR8216LCTVR8216
LCTVR8216
①
“1-16” : BNC Video input .
②
“MON” e “SPOT”:BNC Video output.
③
“AUDIO IN/OUT”: Left & Right Audio
input. Left & Right Audio output.
④
“VGA”: VGA Video output (800x600
60Hz)
⑤
“NET”: RJ-45 Connector for net time
link
⑥
“USB”: USB Interface of Backup
⑦
“ALARM” potential device outer sider
PTZ for alarm
⑧
“DC12V” Minijack power and cookoff and power off
⑨
Air-cooling
For the top shape of the device outer side link the power cable as show carry back on top picture.
485 A/B: link the 2 line wires some RS-485 wire line to along with make connection about the speed dome.
COM – NC – NO: power relay by alarm out put . (common, normally close, normally open)
1 – 2…16: alarm input. No alarm channel is coupled and put in to action typical channel only.
For the top shape use the power source of 12Vdc.
1 9
2 3
4 5 6 7 8
USER MANUAL
LCTVR6104-8208-8216
pag.
10
www.hrcctv.com
2.2 Head-on panel
LCTVR6104
LCTVR6104LCTVR6104
LCTVR6104
Indication LED
N° Symbol function
1 POWER Power – Standby
2 HDD Hard Disk reading / writing
3 LOCK Key locked
4 REC Recording on
5 PLAY Play
6
Status of remote control
7 IR Start receiving form remote control
8 SEQ Auto jump among stations
9 PTZ PTZ Control on
10 NET Network connection
11 ALARM Alarm output on
Keys function
N° Symbol Function
12 ESC press the ESC key will exit from lower level menu to upper level menu until fully exit
from the menu status including the info menu;in case of password status ,press the
ESC key after exit from the main menu will lock the machine.
13 MENU At running status, enter the menu setting status; at lock status (lock light up),press
this key to remind for password input.
14
Under the menu status , select items upwards ,under the PTZ control status , control
the ball machine to rotate upwards.
15
Under the menu status , select items downwards ; under the PTZ control status ,
control the ball machine to rotate downwards.
16
Under the menu status , select items leftwards ; under the PTZ control status ,
control the ball machine to rotate leftwards.
17
Under the menu status , select items rightwards ; under the PTZ control status ,
control the ball machine to rotate rightwards.
18 - Value down for the selected item.
19 + Value up for the selected item.
020
Confirmation key.
21 1 key1; 1 channel display
22 2 Key 2; channel 2 display
Loading...