
LC-25U3-Hydra
TM
Thank you for purchasing this hard disk drive enclosure from
LC-Power. Please read the manual before usage.
Specifications may be subject to change without prior notice.
1. Specifications
2. Installation
Step 1:
3. Notes
Avoid direct sunlight and a high temperature environment, keep
the enclosure far away from fire and heat sources.
Keep it in dry places, keep it away from corrosiveness causing
materials.
User Manual
USB 3.0 enclosure for a SATA HDD/SSD
(6,35cm/2,5“)
Silent Power Electronics GmbH
Formerweg 8
47877 Willich
support@lc-power.com
Germany
www.lc-power.com
Hard disk drive enclosure for a 6,35cm/2,5“ SATA HDD/SSD
- USB 3.0, downwardly compatible to USB 2.0 and USB 1.1
- For a 6,35cm/2,5“ SATA hard disk drive/SSD up to 3TB
- Chipset for SATA I, II & III
- Plug'n'Play
Nominal data transfer rate:
- Superspeed up to 5Gb/s (USB 3.0)
- Highspeed up to 480Mb/s (USB 2.0)
- Fullspeed up to 12Mb/s (USB 1.1)
System compatibility:
Windows XP/Vista/7/8/10, Mac OS 9.1, Linux 2.4 or higher
Included in delivery:
Enclosure, USB 3.0 cable and manual
Unscrew both screws on the side of the enclosure and remove
the circuit board.
Step 2:
Carefully connect a 6,35cm/2,5“ SATA hard disk drive (not
included in delivery) with the matching connector of the PCB
interface. Move the PCB interface and the hard disk drive into the
enclosure and fix the interface with the screws to the enclosure.
4. Service
The product has a two year warranty period from the date of
purchase, service issues will be handled by your dealer.
If the enclosure is damaged due to improper operation, the
warranty period expires immediately.
The enclosure supports most hard disk drives.
Incompatibility to a certain individual hard disk drive is not a reason
for repair or replacement.
We recommend that parents should guide their children using the
item, strictly following the notes in this manual.
Check www.lc-power.com or contact us by e-mail at
support@lc-power.com.
www.lc-power.com