l-com LC-SW805G, LC-SW808G User Manual

LC-SW805G/LC-SW808G - 5/8 Port 10M/100M/1000M Gigabit Ethernet Switch

User Manual

Package Content s

 5 or 8 Port Desktop Gigabit Ethernet Switch
 Power Adapter
 This User Manual

Make sure package contains all of the above items.
If any items are miss ing or damaged, plea s e contact your dis tr ibutor.

Introduction / Pr oduct Overvi e w

Thank you for choos ing L-com’s LC-SW80xG 5/8 Port Desktop Gigabi t
Ethernet Switch.

The LC-SW80xG Series of 5/8 Port Desktop Gigabit Ethernet Switches provide non-blocking, wire speed switching
for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current work group hub or
switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while
continuing to service other clients at their current speeds, or build your network from the ground up, with
appropriate link speeds for each user’s requirements. Either way, it’s perfect for graphics projects, multimedia,
and other applications that need to move large files across the network quickly. With the LC-SW805G or
LCSW808G Switches, you can connect your existing 10/100 Ethernet network to a Gigabit server backbone
without any additional equipment. All ports have automatic MDI/MDIX detection, so installation is worry free. Each
port independently and automatica lly negotiates for be s t speed and wheth e r to r un in half or full-duplex m ode.

Main Features

 Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX, IEEE802.3ab
 1000Base-T specifications
 32/48Gbps switching fabric capacity

 5 or 8 port 10/100/1000Mbps TX Au to-Negotiation Ether net Switch
 Full/Half-Duplex capability on each TX port (only support full duplex In1000M )
 IEEE802.3x sta ndard flow control for F ull-duplex, optional Back Pressure function for Half-duplex operation
 Supports TP inter face Auto MDIX function for auto TX/RX swap
 Support 8K MAC address table
 LED indicators for simple diagnostics and management
 Plug and Play

Standards

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE 802.3x Flow Control

WWW.L-COM.COM E-MAIL: [e-mail] PHONE: [phone] FAX: [phone]

© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.

L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845

Working Environ ment

Temperature

Operating: 32ºF to 104ºF (0°C to 40° C)
Storage: -40ºF to 158ºF (-20° to 70° C)

Humidity

Operating: 10% to 85 % non-condensing
Storage: 5% t o 90% n on-condensing

Power

12V (0.3A 5 Port) (0.5A 8 Port)
AC Adapter

100 - 240VAC, 50 - 60Hz

Front Panel

Rear Panel

The LED indicators include Power, Link/Act LED i ndicators, which are used for monitorin g a nd
troubleshooting.

 POWER: This indicator will ligh t solid red when the Switch powers up. If the LED is not lit, please c heck the

power supply and connec tion .

 10/100M Link/Act: The LED indicates 10/100 Link/Active status. The corresponding LE D indicator will ligh t

solid green when connected to a n etwork device. It flashes green wh en data is being transmitted or recei v ed
on the working c onnection.

 1000M Link: LED indicator will light solid green when it's connected at 1000M bps speed. Will not light if only

connected at 10/100Mbps s peed.

WWW.L-COM.COM E-MAIL: [e-mail] PHONE: [phone] FAX: [phone]

© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.

L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845