LCI Tri-Fold Sofa Owner's And Service Manual
Tri-Fold Sofa
OWNER'S AND SERVICE MANUAL
Rev: 05.23.2017
Page 1
Tri Fold Sofa Owners and Service Manual
TABLE OF CONTENTS
Introduction 2
Safety Requirements 3
Operation Instructions 3
Preparation 4
Tools Required 4
Back Cushion Replacement Instructions 4
Full Cushion Assembly 4
Cushion Foam 4
Cushion Cover 4
Stationary Back Replacement Instructions 5
Full Stationary Back Assembly 5
Stationary Back Interior Foam 5
Stationary Back Interior Frame 5
Stationary Back Cover 5
Couch Seat Replacement Instructions 6
Couch Seat Assembly 6
Couch Seat Interior Foam 6
Couch Seat Interior Frame 6
Couch Seat Cover 6
Couch Seat Legs 6
Middle Seat Replacement Instructions 6
Middle Seat Assembly 7
Middle Seat Interior Foam 7
Middle Seat Interior Frame 7
Middle Seat Cover 7
V2 Frame Replacement Instructions 7
Front Kick Rail Replacement Instructions 8
Rear Kick Rail Replacement Instructions 8
Arm Insert Replacement Instructions 9
Foot Assembly Replacement Instructions 9
Care and Cleaning 9
Maintenance 9
Warranty 9
Introduction
Our one-piece, steel frame Tri-Fold Sofa requires no spare mattress to store. In just four simple steps, it transforms
into a comfortable bed. Traditional hide-a-beds have uncomfortable mattresses with support bars that can make
sleeping uncomfortable. Air mattress hide-a-beds eliminate the support bar issue, but can be damaged more easily
and become unusable. The Tri-Fold Sofa coverts from sofa to a very supportive, high-density foam sleep surface in
four simple steps. Now campers can actually look forward to sleeping on the couch!
Additional information about this product can be obtained from www.lci1.com/support or by downloading the free
myLCI app. The app is available on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc. Google Play™ and Android™ are trademarks of
Google Inc.
Rev: 05.23.2017
Page 2
Tri Fold Sofa Owners and Service Manual
NOTE: Lippert Components, Inc. recommends that the following inspections, troubleshooting, component
replacement, and verifications be completed only by certified RV technicians.
Safety Requirements
Moving parts can pinch, crush or cut. Keep clear and use caution.
Failure to follow the instructions provided in this manual may result in death, serious injury, unit
damage, or voiding of the component warranty.
Operation Instructions
NOTE: Refer to (Fig. 1) for steps 1-5.
1. Remove back cushions from the hook and loop fabric strips and set aside.
2. Fold out the couch seat to expose the middle seat.
3. Fold out the couch seat legs and set upright.
4. Fold down the stationary back.
5. Use back cushions as headrest or pillows.
Stationary Back
Middle Seat
Stationary Back
Middle Seat
Fig. 1
V2 Frame
Couch Seat
Couch Seat Legs
Back Cushion
Arm
Assembly
Arm
Insert
Front Kick Rail
Foot
Rev: 05.23.2017
Couch Seat
Page 3
Tri Fold Sofa Owners and Service Manual
Preparation
Tools Required
• Cordless or electric screw gun or drill
• ½" Socket (Import tri-fold sofas may use a 8mm socket)
• Appropriate screw drivers
• Appropriate drive bits
Back Cushion Replacement Instructions
Full Cushion Assembly
1. Remove cushion from sofa. The cushions are held in place by hook and loop fabric strips (Fig. 2).
2. Place new cushion back on sofa.
Cushion Foam
1. Remove back cushion from the sofa. The cushions are attached by hook and loop fabric strips (Fig. 2).
2. Unzip and remove cover from foam.
3. Discard the foam.
4. Insert new foam into cover.
5. Zip cover completely around new foam.
6. Place cushion back on sofa.
Cushion Cover
1. Remove the cushion from the sofa. The cushions are attached by hook and loop fabric strips (Fig. 2).
2. Unzip and remove the cover from foam.
3. Discard the cover.
4. Insert new cover around foam cushion.
5. Zip new cover completely around foam.
6. Place cushion back on sofa.
Fig. 2
Hook and Loop
Fabric Strips
Rev: 05.23.2017
Page 4
Tri Fold Sofa Owners and Service Manual
Loading...