LCI Smart Jack Installation Manual

™

Smart Jack

OEM INSTALLATION MANUAL

TABLE OF CONTENTS

Introduction 2

Product Information 2

Resources Required 2
Preparation 3
Installation 3
Operation 5

Setting Hitch Height Memory 5
Normal Operation 5
Return To Hitch Height Operation 5
Auto Retract 5

Introduction

The Smart Jack™ features a high-efficiency motor, a new streamlined plastic shroud, and a new user interface. These
features, along with the single power lead and the hitch height memory, give the end user a perfect reason to
replace the traditional tongue jack with a far superior product.

Safety Information

Warning, Caution and Danger symbols indicate that an installation procedure has a safety risk involved and may
cause death, serious injury or property damage if not performed safely and within the parameters set forth in
this manual. Always wear eye protection when performing this installation procedure. Other safety equipment
to consider would be hearing protection, gloves, and possibly a full face shield, depending on the nature of the
installation procedure.

Failure to act in accordance with the following may result in death, serious injury,

trailer or property damage.

Lifting the unit off of the ground so that the unit's wheels are not touching the ground will create an

unstable and unsafe condition. Severe property damage, serious injury or death could occur. Keep

people and pets clear of the unit and work area while operating the leveling system.

Moving parts can pinch, crush, or cut. Keep clear at all times.

Resources Required

• Cordless or electric drill or screw gun

• Appropriate drive bits

• ½" socket wrench

Rev: 07.11.2018

Page 2

CCD-0001395