Please read this manual carefully before use!
LCG-301B
Mixlaser II
User Manual
Mixlaser II User Manual
-
- 1 -
-
Contents
Introduction----------------------------------------------------------------------------P2
Laser warning labels----------------------------------------------------------------P3
Safety instruction -------------------------------------------------------------------P4
Product specification---------------------------------------------------------------P5
Menu operation, function ---------------------------------------------------------P6
Channel instruction ----------------------------------------------------------------P7
DMX Connection-------------------------------------------------------------------- P8
Address setting----------------------------------------------------------------- P8/P9
Structure and material-------------------------------------------------------P10/P11
Installation and Size--------------------------------------------------------------- P12
Maintenance and warning ----------------------------------------------------- P13
Mixlaser II User Manual
-
- 2 -
-
Introduction
Thank you for purchasing this product. To optimize the performance of this product, prior to use,
please read these operating instructions carefully to familiarize yourself with the basic operation of
this unit .Please keep the manual in safe price for future reference.
This unit has been tested at our factory before being shipped to you, there is no assembly required.
Once after received this product, please take and put carefully. And check cautiously that whether
the product was damaged or not during the transportation.
Checking Parts
Please check if the following parts are included:
1 x LED Laser Light
1 x Power cable
1 x User manual
Caution
Before out factory, this device has passed strict inspection, functions stable and perfect
packing. If this device will be operated in any way different to the one described in this
manual, the product may suffer damages and the guarantee becomes void. Furthermore,
any other operation may lead to dangers like short circuit, burns, electric shock, crash etc.
If any technology changes of this manual, company do not notice in further and have
interpretation.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Warning!
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
Mixlaser II User Manual
-
- 3 -
-
Laser warning labels
NON-INTERLOCKED HOUSING WARNING
The Royal Sky contains high power laser devices internally. Do not open the laser housing, due to
the potential exposure to unsafe levels of laser radiation. The laser power levels, if the unit is opened,
can cause instant blindness, skin burns and fires.
STOP AND READ ALL LASER SAFETY DATA
OPERATION INSTRUCTIONS AND LASER SAFETY
The light source emitted from this product can potentially cause eye injury if not set up and used
properly. The light source emitted from a laser is very different from any other light sources with
which you may be aware of. Laser light is thousands of times more concentrated than any light from
any other kind of light source. This concentration of light can cause instant eye injuries, primarily by
burning the retina (the back of your eyeball contatining cells that are sensitive to light). Even if you
cannot feel “heat” from a laser beam, it can still potentially injure or blind you or your audience. Even
Mixlaser II
Mixlaser II User Manual
-
- 4 -
-
very small amounts of laser beam light are potentially hazardous even at long distances. Laser eye
injuries can be sustained faster than you can blink.
Do not think that because this laser splits the laser beam into hundreds of beams and that the laser
beam is scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser
uses dozens of milliwatts of laser power (Class 3B levels internally) before it splits into multiple
beams (Class 3A levels). Many of the individual beams are potentially hazardous to the eyes.
Do not that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams
always move. Since eye injuries can occur instantly, it is critical to prevent even the smallest
possibility of any direct eye exposure. In the laser safety regulation, it is not legal to aim Class 3A
lasers in areas which people can get exposed. This is true even if it is aimed below people’s faces,
such as on a dance floor.
Do not operate the laser without first reading and understanding all safety and technical data
in this manual.
Always set up and install all laser effects so that all laser light is at least 3 meters (9.8 feet) above the
floor on which people can stand.
After setting up, and before public use, test laser to ensure proper function. Do not use if any defect
is detected. Do not use if laser emits only one or two laser beams rather than dozens/hundreds, as
this could indicate damage to the diffraction grating optic, and could allow emission of higher laser
levels above Class 3B.
Do not point lasers at people or animals. Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled
balconies, etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even
laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, the housing is open, or if the optics appear damaged
in any way.
Never open the laser housing. The high laser power levels inside of the protective housing can start
fires, burn skin and will cause instant eye injury.
Never leave this device running unattended.
The operation of a class 3B laser show is only allowed if the show is controlled by a skilled and welltrained operator, familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country. The user
is responsible for the legal requirements at the location/country of use.
Always use proper lighting safety cables when hanging lights and effects overhead.
Safety Instructions
Please open and check whether break or not for transport once receive this fixture, if yes, not use
it and contact dealer or manufacture as soon as possible.
The Max applicable temperature for the light is 40°C. Do not use the light under or above the
Mixlaser II User Manual
-
- 5 -
-
temperature. ta=40℃
The fixture is applicable for many occasions, it should keep clean, and avoid long use in
overheating or dusty environment. To prevent the fixture from the chemical liquid .
User must be careful of fire, heat, electric and fall-off that make heavy or fatal injury. Please read
this user manual carefully before power on and installation, following safety and operation
instruction in it. If still have any questions, please contact dealer or manufacture.
User must following this user manual, do not open fixture by yourself, if any problems, please
contact professional technician, maintenance should by technician.
Do not power on or start the fixture before installation, please stop after working more than 8
hours, which will longer use life.
Fixed installation, do not by strong shocks.
The minimum distance between light and the illuminated surface must be more than 1 meter.
Never look directly into the light source to avoid hurt to eyes (especially epileptics)!
When dustproof glass at light output breaks, cracks or other visible damage, user should replace
with new glass to continue to use.
Installation
When install this equipment please make sure there's no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.Never stand directly below the device when mounting, removing or servicing the
fixture.
Technical Specifications
1. Power supply: AC100V~240V 50/60Hz
2. Amp:：BGDP ￠5x20mm 250VAC T2A
3. Rated power: 70W
4. Laser: R:150mw/650nm,G:50mw/532nm
5. LED：6pcs 5W RGBWAP；8pcs 3W White LED
6. LED effect:Derby
7. Laser effect:8 grating effect
8. Control mode: Sound Active/ Auto-play/DMX512/Master-Slave
9. Channels：10 DMX Channels
10. Scan system：Step motor
11. Operating temperature:10°C~40°C
12. Inner Packing(mm):340*270*340
13. Outer Packing(mm):700*560*370 (4pcs)
Mixlaser II User Manual
-
- 6 -
-
LED Digital Display
Operating Instruction: press button marked as “A” to select a function, For details, please see the
“OPERATION MENU” section. Press button marked as “B” or button marked as “C” to modify
values . Press button marked as “D” to save your settings.
LED Digital Display Operation Menu:
1.When starting up, it will display the last time’s operation .In case without any buttons,
it will close screen automatically after 20seconds.When no DMX, the first dot of led
display will keep on. When has DMX, the first dot will blink
2. At most 10 lights could be linked in one electricity source.
Function：
1. Press MENU to select Addr / SLNd/Auto/Soun / Vers , Press ENTER to the next menu or save,
Press UP / DOWN to select function, Press ENTER to save; Long Press MENU to exit.
No.
Menu
Function
1
Addr
DMX address DOWN/UP to +/- (1-512)
2
SLNd
NASt,Master Mode
SLAv,Slave Mode
3
AUTO
Aut1,Auto Play1,six colors led derby effect auto play
Aut2,Auto Play2，white led auto play
Aut3,Auto Play3，laser auto play
Aut4,Auto Play4，all effects auto play
SPEE,auto speed 0-99
4
Soun
Sou1,Sound Active 1
Sou2,Sound Active 2
Sou3,Sound Active 3
SESE,sound sensitivity 0-99
5
Vers
Ve1.0
E
A B C D
A
．（
MENU
）
B
．（UP）
C
．（
DOWN
）
D
．（
ENTER
）
E．LED Display
Mixlaser II User Manual
-
- 7 -
-
2. Addr, Address setting，DOWN/UP to select 1-512
3. SLNd, Master/Slave setting
4. Auto，Auto mode
5. Soun，Sound mode
6. Vers，version
Channel
DMX-512Value 0-255
Details
CH1
Control Mode
0-9
Black- out
10-39
Auto Play1(Six colors LED auto
）
40-69
Auto Play2（White LED auto）
70-99
Auto Play3（Laser auto）
100-129
Auto Play4（Mixing auto）
130-159
Sound Control 1(Six colors LED sound）
160-189
Sound Control2（White LED sound
）
190-219
Sound Control3（Laser sound
）
220-249
Sound Control4（Mixing sound）
250-255
DMX Mode
CH2
RGBWYV
Control
0-9
RGBWYP black-out
10--198
Choose colors（63 groups）, each 3 data
for 1 color group
199-225
Color chase1（single color）
226-255
Color chase 2(single or multiple）
CH3
Auto Play LED
Eotic Speed
0-255
Auto speed，LED color chase speed from
slow to fast
CH4
LED Strobe
0-9
LED No strobe
10-244
LED Strobe Speed from slow to fast
245-255
LED strobe by sound
CH5
White Color LED
0-9
Whit LED black out
10-134
White LED output position choose，5
data for only 1 choose
135-255
White LED chase effect
CH6
White Strobe and
Eotic Speed
0-127
no strobe, but White LED chase speed
from slow to fast
128-255
With strobe, white LED chase speed
from slow to fast
CH7
Laser color
control
0-9
Laser off
10-49
Red
50-89
Green
Mixlaser II User Manual
-
- 8 -
-
90-129
Red and Green
130-169
Red and Green flicker
170-209
Green and Red flicker
210-249
Red, green synchronous flicker
250-255
Red, green alternative flicker
CH8
Laser Strobe
Control
0-9
Strobe Off
10-244
Strobe Speed（from slow to fast）
245-255
Laser strobe by sound
CH9
LED Step Motor
Control
0-8
Step motor Off
9-127
Step Motor clockwise from slow to fast
128-255
Step Motor counterclockwise from slow
to fast
CH10
Laser Step Motor
Control
0-127
Laser pattern choose
128-255
Laser pattern chase from slow to fast
DMX-512 connection
3-Pins DMX Out 3-Pins DMX In
(Female) (Male)
1 Earth 2 DMX- 3 DMX+
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting address
Mixlaser II User Manual
-
- 9 -
-
and begin accepting DMX512 control signal, so that more convenient separate control one device.
Using this method must be based on channel quantity of device to determine a starting address.
This light has 10 channels. When you use 10CH, you should set the starting address of the first unit
to 1, the second unit to 11(10+1), the third unit to 21 (11+10), and so on.
10CH for example
First（address 001） Second（address 011） Third（address021）
DMX in DMX out to next light
Mixlaser II User Manual
-
- 10 -
-
Structure and material
Mixlaser II User Manual
-
- 11 -
-
No.
Model No.
Name
quantit
Material No
1
LCG-301B-04
Base plate
1
311003111
2
LCG-301B-05
Top cover
1
311006073
3
LCG-301B-03
Back plate
1
311002074
4
LCG-301B-02
Front plate
1
311001100
5
LCG-301B-06
Clapboard
1
311020001
6
LCG-301B-07
Handle
1
316001088
7
LCG-301B-09
Head cover
1
311012014
8
LCG-301B-08
Motor stand 1
1
313001058
9
LCG-301B-10
Locating plate
1
321001014
10
LCG-301B-11
Motor stand 2
1
313001059
11
LCG-301B-12
Reflection plate
1
313028001
12
LCG-301B-13
Reflection dish
4
322013007
13
LCG-301B-14
FPC1315001100
14
LCG-301B-16
Red laser plate
1
313003010
15
LCG-301B-15
Green laser plate
1
313003008
16
LCG-301B-18
Reverse bracket
1
314001013
17
LCG-301B-17
Stand flange
1
313001060
18
LCG-301B-19
Motor flange
1
319001030
19
13*10*1.1mm
Pass red, reflect green
1
302005003
20
MB-29
Main Board
1
205001115
21
MB-22A
LED Driver Board
1
205002023
22
ABL-54A
Aluminum base plate 1
1
205003102
23
ABL-55A
Aluminum base plate 2
8
205003103
24
LB-RG1
Power
1
203022001
25
GZLU90-S 12V-7.5A
Switch power
1
204001056
26
AB-24A (w ith indicator light)
Display board
1
205004019
27
Red Laser: 100mW/650nm
R180B4
1
202109007
28
Green Laser: 50mW / 532nm
G300H2
1
202008005
29
Male, 25v, 10A
Power socket
1
301923008
30
250v/10A, with fuse
Power socket
1
301923002
31
IN, /K3F2C-B
DMX IN ( male)
1
301909007
32
OUT,/J3F2C-B
DMX OUT (female)
1
301909008
33
3010, DC12V, 0.08A
Fan1301701025
34
M8*12
Handle screw
2
306020003
35
25mm stand, 45° lens
LED lens parts
8
302018003
36
60*39.5*9.5
convex mirror
8
302012028
37
Plastic parts
convex lens holder
8
303010012
38
14*14*1.2mm
Shivering glass
80
302019026
39*
HYS8-12, 40*2. 3mm
8 grating
1
302001108
40
24BYJ48-36，DC12V
Step Motor
1
301601012
41
39HB105C-12
Step Motor
1
301601004
42
20* 8*3mm
Rubber mat
2
303002004
43
M6,Outer ring 20mm
Ring1306019007
46
Meteor shower 020T, 10*10*1.1mm
Grating filter
1
302001104
Mixlaser II User Manual
-
- 12 -
-
Installation
1 Clamp
2 Handle
When install this equipment please make sure there's no flammable surfaces
(decorated things, etc) within at least 2.5M and maintain minimum distance of 0.5M
from the equipment to the walls.
Please make sure that there's no other equipment or decorating materials obstructed
the exhaust fan and the vent-pipe.
Products should be install immobility.
In case of safety, it's very important that to connect the earth with line.
Product size
Mixlaser II User Manual
-
- 13 -
-
Declaration
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
Attention
Do not see directly light source when open the light, and make sure power off before do any
installation or maintenance.
Cut off power before cleaning and maintenance!
CAUTION
Wires connection must be professional person!
CAUTION
Loading...