LBL Lighting Vera P User Manual

Installation Instructions for

980VERAP

Vera Pendant

Suspension

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

LP777_

1.0

Assemble the Fixture

1A

CAP

SOCKET

ASSEMBLY

STEM

CORD

THREADED
NIPPLE

1B

2

THREADED
NIPPLE

GLASS SHADE

1

1

Unscrew the cap from the threaded nipple, then remove
the stem and cap from the cord.

2

Feed the cord from the socket assembly through the
glass shade until the threaded nipple is completely
exposed.

1

Install the Lamp

1C

GLASS

SHADE

CAP

3

4

CORD

STEM

THREADED
NIPPLE

2A

SOCKET

GLASS SHADE

LAMP

CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.

3

Feed the cap and stem (in that order) through the cord.

Secure the glass shade by tightly screwing the cap onto

4

the threaded nipple.

Use 120 voltMAX 75 Watt
Type A19 Medium Base Lamp.

1

Reach inside the glass shade and screw the lamp into
the socket.

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

800.323.3226 - 847.626.6300

www.lbllighting.com

© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.

2

A Generation Brands Company