LBL Lighting Twin Tube Chandelier User Manual

Installation Instructions for
980FSJTUBTCH
Tube Twin Chandelier Head
Fusion Jack
Fusion Jack
GP I :ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
HTWTBFRSC1BFSJ
1.4
Install the Lamp
1A
PLASTIC WASHER
NOTE:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
1
Unscrew and remove the thumb screws and plastic washers from the socket housing.
1
SOCKET HOUSING
THUMB SCREW
1
1B
LAMP
SOCKET
2 2
LAMP PIN
NOTE:Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type XelogenMAX 10 (Xenon) Bi-Pin Lamp With Each Socket.
2
Install each lamp by pushing the lamp pins completely into the socket holes.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular Halogen lamp.A regular Halogen lamp requires a protective glass shield.
1
1C
GLASS SHADE
3
5
SOCKET HOUSING
3
Slide glass shade into the socket housing.
4
Align the glass shade hole with the socket housing hole.
THUMB SCREW
4
Replace and tighten the thumb screw and plastic washer.
5
Repeat the step 3 and 4 for the other glass shade.
6
Refer to the instruction provided with the system to install the fixture.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved. The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.
2
A Generation Brands Company
Loading...